M Khanjani; S.R Moussavi-Harami; H Rahimpour-Bonab; M.R Kamali; A Chehrazi
Abstract
The Santonian – CampanianIlam Formation is one of the major reservoirs of Bangestan Group in the Zagros petroliferous basin. In the Siri Alvand Oilfield located in the Persian Gulf this formation with a total thickness of 130 m, consists of limestone. In this study, microfacies, depositional environments, ...
Read More
The Santonian – CampanianIlam Formation is one of the major reservoirs of Bangestan Group in the Zagros petroliferous basin. In the Siri Alvand Oilfield located in the Persian Gulf this formation with a total thickness of 130 m, consists of limestone. In this study, microfacies, depositional environments, diagenetic processes and sequence stratigraphy of the Ilam Formaton in Siri Alvand oilfield was studied. Based on thin sections studies, 8 microfacies and 4 facies associations were identified that deposited in a homoclinal carbonate ramp environment. On the basis of petrographic studies, the main diagenetic processes affected these rocks include bioturbation, cementation, dissolution, dolomitization, stylolitization, pyritization and fracturing. The most important cement types in this formation are bladed calcite, fine equant calcite, drusy mosaic calcite, coarse blocky calcite and syntaxial calcite overgrowth. Sequence stratigraphic studies led to recognition of four third order depositional sequences in the Ilam Formation that all of them terminated to the type 1 sequence boundary. Finally, facies and diagenetic processes intensity were studied in each sequence.
B Tokhmechi; H Azizi; H Memarian
Abstract
Estimation of rock type, porosity and saturation are the main applications of petrophysical logs. Several equations are presented for mentioned estimations, and deficiencies of these equations are widely investigated. In this paper, general deficiency of well logs processing methods is discussed. In ...
Read More
Estimation of rock type, porosity and saturation are the main applications of petrophysical logs. Several equations are presented for mentioned estimations, and deficiencies of these equations are widely investigated. In this paper, general deficiency of well logs processing methods is discussed. In general, because of smoothing trait of estimators, variability of estimated data is less than raw data. Since rock type, porosity and saturation are estimated from various well logs, it is anticipated that they have less variability in comparison with raw well logs. Therefore, it seems that energy (equal to information) of Fourier transform of estimated well logs in low frequency bands have to be more than similar energy of raw well logs. This study has been done on raw and estimated well logs of more than 100 wells of Iranian south and southwest oil fields. The results showed that estimated well logs have more variability, which confirms a fundamental deficiency in current well log processing methods.
R Ferdowsi; A.A Calagari; M.R Hosseinzadeh; K Siahcheshm
Abstract
Astarghan area is located in ~ 50 km of north of Tabriz, southeast of Kharvana, East-Azarbaidjn. The area is a part of Gharadagh- Arasbaran metallogenic belt. The most important units in the area is a hypabyssal prophyritic to granular granodioritic intrusive body of Oligo-Miocene and flysch- type sedimentry ...
Read More
Astarghan area is located in ~ 50 km of north of Tabriz, southeast of Kharvana, East-Azarbaidjn. The area is a part of Gharadagh- Arasbaran metallogenic belt. The most important units in the area is a hypabyssal prophyritic to granular granodioritic intrusive body of Oligo-Miocene and flysch- type sedimentry sequence of limestone, limy sandstone and marl (Paleocene-Eocene). Intrusion of the stock into the sedimentary rocks caused them to convert into a series of metasomatites and contact metamorphic rocks. Geostatistic studies on stream sediments and heavy mineral were done and include data processing, (i.e. normalization, univariate and multivariate analysis), and ultimately preparation of anomaly maps. The correlation coefficients among elements were determined. Elements that show positive correlations with gold are Cu, Hg, Pb, As, Sb, Ag, Bi and Mo. The results of preliminary regional geochemical explorations have led to discovery of two anomalous zones for gold; grade 1 and grade 2. The anomalies were verified by studies on heavy minerals in stream sediments and mineralized and altered samples taken from gold anomalous zones. The most important indentified heavy minerals include magnetite, malachite, gold, micaseous hematite, pyrite, galena, cerussite, pyrite- limonite, goethite, limonite, barite, hematite, pyrite- oxide which are affiliated with alteration and mineralzation zones. The major alterations in the area are argillic, sericitic and propylitic developed along the vein’s walls. Field and analytic studies done on samples taken from the gold anomalous zones led to identification of epithermal gold veins having over 4.5 ppm gold grade. The concordance of anomaly map with tectonic map and altered zones indicate that the faulted and fractured zones have played a crucial role in creation of gold anomalous zones. The incorporation of these data in the area led to introduction of several anomalous zones belonging to Au, Ag, Cu, As and Pb that can be used as passfinders for epithermal gold.
N Mousavi; A L.Kani; A Mosavinia
Abstract
In this study the succession comprising Aitamir and Abderaz Formation boundary is investigated along Amir Abad section in eastern Koppeh-Dagh region. Based on Calcareous nannofossils and NC biozonation scheme, Late Albian to Late Turonian time of deposition is estimated for the measured succession. There ...
Read More
In this study the succession comprising Aitamir and Abderaz Formation boundary is investigated along Amir Abad section in eastern Koppeh-Dagh region. Based on Calcareous nannofossils and NC biozonation scheme, Late Albian to Late Turonian time of deposition is estimated for the measured succession. There is some evidence such as paleoecological changes and increase in organic carbon burial, enabling recognition of the Cenomanian – Turonian Oceanic Anoxic Event (OAE2) in this section. Anoxic events often occur as a result of high productivity leading to increased burial of organic matter. Paleoecological trends recorded including decrease in abundance of Broinsonia spp. and Biscutum spp. and increase in Watznaueria spp. at the beginning of the late Cenomanian interval suggest prevalence of oligotrophic condition during this interval of time. In the late Late Cenomanian and Cenomanian-Turonian boundary intervals, the increase in relative abundance of surface water high fertility markers such as Biscutum spp. and the increase of fertility index i.e. (Biscutum+Zeugrhabdotus)/Watznaueria, point to amore eutrophic condition. The absence of Nannoconus spp., which are not seen in anoxic conditions, is another evidence of OAE2. The rising trend of total organic carbon content in the Late Cenomanian part of the sedimentary succession and the mentioned paleoecological evidences, suggest presence of Late Cenomanian Oceanic Anoxic Event in eastern Koppeh-Dagh. Although this global event is mostly reported from oceanic black shales, in some sections especially in the east of Tethys, it is sometimes recorded in shallow water sediments. Shale and marl succession in Koppeh-Dagh region can be considered as the continuation of their global trend in the eastern-most part of the Tethyan realm where the Late Cenomanian Oceanic Anoxic Event (OAE2) has occurred in a rather shallow environment of deposition.
Exploration and Mining
Ayyub Nikkhah; Mohammad Taji
Abstract
In open pit mines, the extraction of ore rock with minimum price and good quality is the most important mining goal. In this paper, the impact of underground water on production costs and mining process has been investigated. For this purpose, the parameter specific crushing(S_cr ), measured and used. ...
Read More
In open pit mines, the extraction of ore rock with minimum price and good quality is the most important mining goal. In this paper, the impact of underground water on production costs and mining process has been investigated. For this purpose, the parameter specific crushing(S_cr ), measured and used. To evaluate mining operation in dry and wet conditions of database in two parts of production costs and mining operations of two blasts, holes with diameter of 6 inches were created. The difference of two different conditions of mining in increasing production costs and reducing production performance is observed such that the costs including drilling cost, blast cost, total drilling and blast costs, loading cost are increased respectively, equal to 83.33, 450, 266.67 and 200 percent in wet mining conditions compared with dry conditions. Rock crushing cost due to crushing amount is almost similar in both conditions. Also, wet mining conditions cause reducing the production yield of Sarcheshmeh copper mine such that production performance in sections including special loading and index specific mining operations unit has been decreased respectively, equal to 33.34 and 198.85 percent compared to dry conditions. In order not to use waterproof explosives, improvement of mining operations index and reduction of project production costs, it is necessary to determine the model of underground water of Sarcheshmeh copper mine. Desirable mining operation will be provided with lower cost with sustainable development by drainage of underground water in open pit mines.
Petrology
Soghra Razaghi; mohsen nasrabady; Kazem Gholizadeh; Zeinab Davoodi
Abstract
The Gash metamorphic complex is situated at the west of Rasht city. Gasht-e-Rodkhan metamorphic rocks are considered as a part of this metamorphic complex. Metapelites (schist, gneiss and migmatite) are the most important lithological unit of the Gasht-e-Rodkhan area. Index minerals consist of staurolite, ...
Read More
The Gash metamorphic complex is situated at the west of Rasht city. Gasht-e-Rodkhan metamorphic rocks are considered as a part of this metamorphic complex. Metapelites (schist, gneiss and migmatite) are the most important lithological unit of the Gasht-e-Rodkhan area. Index minerals consist of staurolite, garnet, sillimanite and kyanite. The main rock forming minerals of muscovite-free melanosome of migmatites are sillimanite and biotite. There is garnet in some melanosome as well. Quartz, K-feldspar and plagioclase are the rock forming minerals of leucosome. Tourmaline, garnet, muscovite and sillimanite are accessory minerals. Average pressure and temperature calculated by Thermocalc software and conventional thermobarometers for schist, gneiss and migmatite samples are 8.6 Kb, 630°C; 6.7 Kb, 650°C and 6.3 Kb, 720°C respectively. Mineralogical parageneses and geothermal gradient resulted from thermobarometry calculations of the Gasht-e-Rodkhan metapelites are compatible with metamorphic Barrovian gradient or orogenic type. Gash complex probably represents metamorphic rocks of medium crustal depth of a collisional tectonic setting between Alborz block and Turan plate. Partial melting of metapelites and generation of associated leucogranites have taken place as a consequence of muscovite dehydration melting.
Hasan Zamanian; Ghasem Beiranvand; Farhad Ahmadnejad
Abstract
Bagoushi deposit is located in 37 km northwestern Masiri in Fars province. Structurally the deposit is situated in the Zagros Simply Folded Mountain belt and developed in Upper Cretaceous carbonates. From the top to bottom, the deposit is consisting of red, pisolitic, brown, brecciate, and kaolinitic ...
Read More
Bagoushi deposit is located in 37 km northwestern Masiri in Fars province. Structurally the deposit is situated in the Zagros Simply Folded Mountain belt and developed in Upper Cretaceous carbonates. From the top to bottom, the deposit is consisting of red, pisolitic, brown, brecciate, and kaolinitic bauxite horizons. Boehmite, kaolinite, hematite, pyrophyllite, anatase, calcite and diaspore are the major mineral phases. The main ore textures of the deposit include pisolitic, pisolitic-oolitic and clastic with pelitomorphic and microgranular matrixes. According to the formation conditions of the major minerals, the Bagoushi deposit formed in an environment ranging from acidic-oxidizing surface water to basic and reducing groundwater. Some textural features such as pelitomorphic matrix, pisolitic and oolitic textures, radial fractures in pisoids, growth of simple cortex around earlier pisoids, pisoids with cortexes lacking radial and circular fractures, are indicative of allochthonous origin; and broken pisoids, allogeneic pisoids and clastic grains reveal the transportation of bauxitic materials; therefore the bauxite materials is authigenic, but in some parts were transported and re-deposited, at least locally. The mass change calculations relative to the immobile element Ti show that elements such as Si, Fe, Mg, K and Na are leached out; Al, Zr, V, Th, Nb, Ba and REEs particularly LREE are concentrated; and Hf, Ta, Co, Rb, Cs, Be and U are relatively immobile during the bauxitisation process. The bauxite ores are characterized by progressive enrichment of the REE compared to parent rock, intense LREE/HREE fractionation, relatively stable negative Eu anomalies, and weak negative Ce anomalies.
S.Z Pourheidar; A Mahboubi; M.H Mahmudy Gharaie; S.R Moussavi Harami
Abstract
The Mozduran Formation in west of the Kopet-Dagh basin, NE Jajarm, is mainly composed of dolostone in top and base, and mudstone to grainstone limestones in the middle parts of Cheshme-Khan section. This formation in the Qezel-Tapeh2 well is composed of alternative limestone and shale layers. Based on ...
Read More
The Mozduran Formation in west of the Kopet-Dagh basin, NE Jajarm, is mainly composed of dolostone in top and base, and mudstone to grainstone limestones in the middle parts of Cheshme-Khan section. This formation in the Qezel-Tapeh2 well is composed of alternative limestone and shale layers. Based on the facies studies, four carbonate facies associations (open marine, barrier, lagoon and tidal flat) have been identified, including fifteen carbonate microfacies and two siliciclastic lithofacies. It is interpreted that the Mozduran Formation in this area were deposited in a homoclinal ramp of a carbonate platform. The sequence stratigraphy analysis led to distinguish five depositional sequences in the Cheshme-Khan section and four depositional sequences in the Qezel-Tapeh2 well. The lower boundary of the 1st sequence (paleosol layar in the Cheshme-Khan section) and the upper boundary of the latest sequence (continental deposits) of both sections are a "type 1" sequence boundaries, but other boundaries are interpreted to be a "type 2" sequence boundaries. The relative sea-level curve of the study area comparing to the global sea-level curve, shows a relatively correlation and some differences can probably be related to regional tectonic setting of the Kopet-Dagh basin due to subsidence along the longitudinal faults and sediment loading.
Economic Geology
A. R. Zarasvandi; Fatemeh Davoodian Ranjbar; Mohsen Rezaei; M. Tashi; Houshang Pourkaseb
Abstract
Sarkuh porphyry copper deposit is located 180 km west of Kerman province, 6 km southwest of Sarcheshmeh porphyry copper mine in the northeast of Pariz city. Considering geological divisions, it is a part of Urumieh-Dokhtar magmatic arc. The exposed rocks in this area are mainly composed of volcanic units, ...
Read More
Sarkuh porphyry copper deposit is located 180 km west of Kerman province, 6 km southwest of Sarcheshmeh porphyry copper mine in the northeast of Pariz city. Considering geological divisions, it is a part of Urumieh-Dokhtar magmatic arc. The exposed rocks in this area are mainly composed of volcanic units, tuffs, andesite and basaltic andesite. Also intrusive units include granite to granodiorite, and to a lesser extend quartz diorite rocks. Major alterations of the deposit include potassic, phyllic, argillic and propylitic, as well as intermediate alterations such as potassic - argillic and potassic - phyllic. The purpose of this research is to study the chemical features of biotite and chlorite in order to investigate the physicochemical attributes of porphyry system during magmatic to hydrothermal transition in the patassic alteration. Based on the temperatures of reequilibrated biotite, at the time of magmatic to hydrothermal transition, the temperature ranged from 343 to 397°C. Also high magnesium nature of biotites, and their plotting in the boundary of magnetite-hematite (HM) and nickel-nickel oxide (NNO) buffering lines, as well as presence of magnetite with hematite rims indicate previlling of the high oxygen fugacity during potassic alteration.
Tectonics
Sepideh Rezabeyk; Abdollah Saidi; Mehran Arian; Ali Sorbi
Abstract
In the Northern part of Suture Zone (Kermanshah) the deep sea sediments, oceanic crust remnants, platform carbonates, igneous and metamorphosed rock of active margin and carbonate sequence of passive margin are assembled in this studied area. This convergent area has provided a very complicated structural ...
Read More
In the Northern part of Suture Zone (Kermanshah) the deep sea sediments, oceanic crust remnants, platform carbonates, igneous and metamorphosed rock of active margin and carbonate sequence of passive margin are assembled in this studied area. This convergent area has provided a very complicated structural zone. The main purpose of this study is stress characteristic analysis. A great data has gathered from the faults which are appeared within the rocks specially the radiolaritic rocks. The data includes characteristics of fault surface geometry, fault slip and lineation slip related. By using the method Right Dihedral, the position of main stress was obtained. The great number of reverse faults have a NW- SW trend, while the strike- slip faults, show a NE- SW direction. The Normal faults with a different displacements appeared younger than the other faults. The result of this study that we obtained the situation of main stress σ1, σ2 and σ3 respectively is 059, 305 and 195.
Sedimentology
Gholamreza Hosseinyar; Reza Moussavi-Harami; Iraj Abdollahi fard; Asadollah Mahboubi; Hamidreza Mosaffa
Abstract
Identification of falling-stage system tracts (FSST) in sequence stratigraphy has important role in sequence boundary recognition and exploration researches. However, formation and preservation chance of its related facies in the fluvial successions is very low. This study pays to signs and evidence ...
Read More
Identification of falling-stage system tracts (FSST) in sequence stratigraphy has important role in sequence boundary recognition and exploration researches. However, formation and preservation chance of its related facies in the fluvial successions is very low. This study pays to signs and evidence of identification of the FSST in sequence stratigraphy with an example from Lower Cretaceous fluvial Shurijeh Formation in the east Kopeh Dagh Basin. Integration of 3D seismic data with boreholes data from seven wells and four outcrop sections (Shurijeh Village, Anjeer-Bulagh, Mozduran Pass and Qorqoreh) used in this study. Results show that during Late Jurassic-Early Cretaceous marine regression fine-grained and hybrid carbonate-siliciclastic facies in the base of the Shurijeh Formation are belong to falling stage system tract. These facies deposited in low energy condition in flood plain and coastal plain, related to the shoreline trajectory. Based on seismic stratigraphic study, fluvial system tocks place and channels created in the basin, during sea/base level forced regression. Quantitative seismic geomorphological analyses indicate that existed channels were hydraulically as bypassing channels.
Petrology
Mehdi Rezaei-Kahkhaei; Dariush Esmaeily; Hanieh Sahraei
Abstract
Neshveh volcanic rocks located in the NW Saveh are parts of the Uromeyeh-Dokhtar magmatic arc. The rocks are mainly basalt, basaltic andesite, andesite and trachyandesite in composition. Petrographical studies represent some evidences for the lack of equilibrium between crystals and magma, such as sieve ...
Read More
Neshveh volcanic rocks located in the NW Saveh are parts of the Uromeyeh-Dokhtar magmatic arc. The rocks are mainly basalt, basaltic andesite, andesite and trachyandesite in composition. Petrographical studies represent some evidences for the lack of equilibrium between crystals and magma, such as sieve texture, two generation of fresh and altered plagioclase, reaction rim, corrosion and rounding of phenocrysts. Major and trace element diagrams show, although crystal differentiation was effective in the evolution of the study rocks, the scatter and unusual trends, which are observed in some diagrams in comparing with fractionation trend, reflect magma mixing and contamination were also important during magma generation. Inconsonance and high variations in Sr concentrations together with binary diagrams of Nb/Y-Nb and Rb-Zr/Rb reveal magma mixing role in the evolution of Neshveh volcanic rocks. Considering the above facts, we can conclude that magma mixing and magmatic differentiation were the important processes in formation of the Neshveh volcanic rocks. As well as, the incorporation of new magmatic pulse(s) with differentiation magma is the most effective mechanism for the evolution of volcanic rocks from the study area.
M.R Hezareh; I Rasa
Abstract
In the western part of the Sistan & BaluchestanProvince (continuation of the Jebal- e BarezRange) in southeast Iran, the epithermal type (i. e. gold and associated elements) model is one of the anticipated metallogenic model. The studied area is one of the important targets of regional geochemical ...
Read More
In the western part of the Sistan & BaluchestanProvince (continuation of the Jebal- e BarezRange) in southeast Iran, the epithermal type (i. e. gold and associated elements) model is one of the anticipated metallogenic model. The studied area is one of the important targets of regional geochemical exploration. In this regard, the mineral and geochemical geological map of 1/20000 was prepared in an area of 81 km2. After processing of the data and identifying the ore zones, 30 trenches drilled perpendicular to the veins and one sample was taken in every 5 meters. The results show that a tectonomagmatic event and large scale fracturing with strike of N30E led the hydrothermal solutions and caused an extensive alteration. This alteration caused a regional propylitization in andesites and development of a large argillic-silicious alteration in associated lavas and pyroclastics followed by formation of the thin silicious veins in strike of N30E with chalcedony, colloform, cockade and vesicular structures, having the quartz adularia paragenesis and are assumed to be the sources of gold genesis and the main phase of gold formation.
H. Peernajmodin; E. Rastad; A. Rajabi
Abstract
The Kouh-Kolangeh carbonate-hosted Zn-Pb-Ba deposit is hosted by Lower Cretaceous detrital-carbonate sequence in the central part of the Malayer-Isfahan metallogenic belt (MEMB) and has been formed within an extensional basin. Ore mineralization occurred as concordant with layering in the upper part ...
Read More
The Kouh-Kolangeh carbonate-hosted Zn-Pb-Ba deposit is hosted by Lower Cretaceous detrital-carbonate sequence in the central part of the Malayer-Isfahan metallogenic belt (MEMB) and has been formed within an extensional basin. Ore mineralization occurred as concordant with layering in the upper part of non- argillic massive orbitolina gray limestone (Kl) and at the boundary of shale- marl with intercalated thin bedded limestone unit (Ks) with Aptian age. Sulfide minerals include sphalerite, galena and pyrite. Barite is the most abundant non-sulfide mineral associated with quartz, calcite and dolomite. Ore textures and structures include breccia, replacement, vein-veinlets, massive barite and laminated ore. Silicification and carbonatation (calcification- dolomitization) are the main wall-rock alterations. Based on fluid inclusion studies, fluid inclusions can be divided into two types: (I) two-phase fluid inclusions (T1) with amoebic and irregular shapes and average homogenization temperature of (T1) 206.8°C and the average salinity of 8.3 wt% NaCl. (II) CO2-rich three-phase fluid inclusions (LCO2-LH2O-VCO2) (T II) with spherical shapes and average total homogenization temperature of (T1) 234.8°C and the average salinity of 7.17 wt% NaCl. According to evidence such as tectonic setting, type of host rock, layered geometry of deposit, ore textures and structures, homogenization temperature, average salinity and presence of massive barite, the Kouh Kolangeh deposit can be considered as an Irish-type Zn- Pb deposit.
S. Younesi; M. R. Hosseinzadeh; M. Moayyed
Abstract
The Mahour Zn-Cu-(Pb-Bi-Ag) deposit located in central Lut Block, formed in an intensely crushed fault zone, dominantly in dacite-rhyodacite volcanic-subvolcanic unit of Late Eocene- Oligocene age. Mineralization occurred as veins, veinlets and breccia massive sulfide and/or as quartz , quartz-carbonate ...
Read More
The Mahour Zn-Cu-(Pb-Bi-Ag) deposit located in central Lut Block, formed in an intensely crushed fault zone, dominantly in dacite-rhyodacite volcanic-subvolcanic unit of Late Eocene- Oligocene age. Mineralization occurred as veins, veinlets and breccia massive sulfide and/or as quartz , quartz-carbonate or quartz-muscovite (sericite)- carbonate vein-veinlets. Apart from negligible dark sphalerite, only fine-grained pyrite is observed as disseminated phase within the host rocks. Hypogene mineralization is complex and the main minerals, in order of abundance, are pyrite, Fe-bearing sphalerite and chalcopyrite, with subordinate galena, Cu-sulfosalts, Bi-sulfosalts, Fe-poor sphalerite, and afew greenokite, arsenopyrite, digenite and probably covellite. The Considerable amounts of Ag exist in lattice of some sulfosalt and sulfide minerals, as well as locally negligible Au-bearing W minerals. Mineralization is dominantly associated with sericitic, intermediate argillic and propyllitic alterations and rarely with advanced argillic and quartz- adularia that formed at three main stages including: 1- quartz- pyrite, 2- Fe- bearing sphalerite, and 3- chalcopyrite stage with sulfosalts and minor high sulfidation minerals. Mineralization occurred after silicification and disseminated pyritization that comprise tourmaline (sericitic alteration prior to mineralization) and then weathering process affected it. According to very low dissolution of Cu in Cu-Zn-S equilibrium system, high density of chalcopyrite inclusions in Fe-bearing dark sphalerites in Mahour reveals replacement origin of chalcopyrite disease texture. This texture and mineralogy (ore and alteration) indicate formation of Mahour polymetal mineralization at temperature range of 200-400°C and from an intermediate sulfidation state and low acidity fluid which was neutralized to alkaline by interaction with wall rock. Although, a minor evidence for evolution to high sulfidation state, more acidic and oxidation conditions is recorded in Cu- rich zone. Mineralogical features of the Mahour deposit indicate predominantly magmatic origin for mineralizing hydrothermal fluid, and in combination with mineralization structure, association with calc-alkaline to shoshonitic igneous rocks and tectonic setting of host rocks, are very similar to cordilleran style polymetal lode deposits.
R Sadeghi; A Saidi; M Arian; M Ghorashii
Abstract
In this study, separation of paleostress phases in the Khalkhal region has been doneusing paleostress analysis based on heterogeneous fault slip data and related slip lineations.The data have been measured and collected from the Jurassic, Cretaceous and Eocene units.To determine the sense of shear or ...
Read More
In this study, separation of paleostress phases in the Khalkhal region has been doneusing paleostress analysis based on heterogeneous fault slip data and related slip lineations.The data have been measured and collected from the Jurassic, Cretaceous and Eocene units.To determine the sense of shear or slip, indices such as stratigraphic separation across the faults, kinematic indicators on fault surfaces, conjugate fractures, and tensile cracks were used.The data were analyzed with the help of inversion method. The results indicate that strike-slip regime is dominant in the region. Constraining the stress phases and comparison with the field and seismic data revealed that the third stress regime is characterized by avertical σ2and a NE-SW extension related to the modern stress regime, which is also compatible with the seismic data. The first and second phases of stress prevailed along NW-SE and N-S directions related to the paleostress regimes.Various investigations, including rose diagram analysis of faults and arrangement of structures show that the faults in the region are dominantly strike-slip and strike-slip with normal component, and the shape of the stress field in the region is prolate.
S Maghfouri; E Rastad; F Mousivand
R. Haftlang; M. Afghah; S. A. Aghanabati; M. Parvaneh Nezhad Shirazi
Abstract
Lithological and biological Sequences of Cretaceous in Bahar section, Located in South Esfahan (147 m. true thickness) include grayish olive green pencil- like shales containing Budantysras Ammonites (Albian) interbedded with limy shales. which are covered by glauconitic Sandy Limestone (Early Turonian) ...
Read More
Lithological and biological Sequences of Cretaceous in Bahar section, Located in South Esfahan (147 m. true thickness) include grayish olive green pencil- like shales containing Budantysras Ammonites (Albian) interbedded with limy shales. which are covered by glauconitic Sandy Limestone (Early Turonian) (with erosional discontinuity). These sandy limestones are wackestone and rarely greenstone, according to Dunham classification. Based on Biozone divisions, this unit is related to Biozone No. 27 presented by Wynd (1965) and it is equivalent to Sarvak Formation in Zagros. Marly limestone and limestone containing Inoceramus bivalve interbedded with marl dating back to Late, Middle Touronian- Late Touronian- Coniacian to Early Santonian are younger equivalents of this section which can be equaled to Surgah Formation. According to Biozone divisions, this unit is equivalent to Biozone No. 28 presented by Wynd (1965) and also based on Dunham classification, the unit is packestone and partly boundstone. The lower Contact of the unit is Concordant and Continuous with glauconitic sandy limestone and its upper Contact is Continuous and Concordant with marl and interbeddings of Limestones dating back to Santonian- Campanian. By comparing Bahar Section with South eastern Lorestan section (Poshte jangal anticline), (Azadbakht, 2015), the following results were obtained: From Litho/bio stratigraphical view, thick to thin-bedded Limestones (Light to dark gray) interbedded with marl in Poshte jangal anticline are Correlated with Inoceramus limestone and marly Limestone interbedded with marl in Bahar Section. They are dated back to EarlyTuronian to Early Campanian.Due to Strong similarity of Lithostratigraphy and biostratigraphy between Bahar section located in Southern Esfahan (Central Iran) and section of Poshte jangal anticline located in Southeast of Lorestan, it can be deducted that a branch of Lorestan Sea has advanced in Turonian- Coniacian times and some parts of Southern Esfahan has been covered by the sea.
Petrology
gholamreza ghadami; Mohammad Poosti
Abstract
The studied area is located in the north of Rudan city, Groom mountain, in the contact area of the Zagros and Makran zones and some part of Kahnuj-Rudan-Minab ophiolite belt. The studied ultramafic rocks include lherzolite and harzburgite, matrix minerals contains olivine, orthopyroxene, clinopyroxene ...
Read More
The studied area is located in the north of Rudan city, Groom mountain, in the contact area of the Zagros and Makran zones and some part of Kahnuj-Rudan-Minab ophiolite belt. The studied ultramafic rocks include lherzolite and harzburgite, matrix minerals contains olivine, orthopyroxene, clinopyroxene and chromian spinel which is a minor mineral. Based on the geochemical data, the amount of CaO, MgO, TiO2 and V, these rocks belong to non serpentinized orogenic ophiolites. According to microprobe data, the high amounts of Mg#(91.15-93.24) in the lherzolite olivines are indicated that these olivines had refractory and restite, also lherzolite clinopyroxenes are also of the diopside quality, but spinels have poor chromian. Detailed microprobe studies on the spinel of these rocks, ndicated of the high amounts of Mg#(71-77) and Al2O3(52.98 to 46.31Wt%) ) and low Cr#(14-22). Cr/Al proporation of in chromian spinels of lherzolites are equal to 0.19 and amount of Fe3+ in the lherzolite spinels is very low (
R Shabanian; N Farajnezhad
Abstract
Permian deposits crop out in the North East QarehZiaaeddin (Illanlu section) consisting Dorud, Ruteh, Nesen and Elli Bashi formation respectively. In this section, the Ruteh Formation composes about 751.3m of dark to grey, medium to massive limestone. The Nesen Formation contains approximately 627.3m ...
Read More
Permian deposits crop out in the North East QarehZiaaeddin (Illanlu section) consisting Dorud, Ruteh, Nesen and Elli Bashi formation respectively. In this section, the Ruteh Formation composes about 751.3m of dark to grey, medium to massive limestone. The Nesen Formation contains approximately 627.3m of shaly limestone, shale and marl and finally the Elli Bashi formation contains about 22.7m grey thin nodular limestone, Red limestone and colored shale. The lower boundary of marine sequence is marked disconformably by Dorud Formation and upper boundary is conformable and continuous with Early and middle Elika Formation. On the basis of stratigraphical distribution of microfossils chiefly foraminifera five Assemblage biozoneswere distinguished includingTetrataxis-Globivalvulina-Nankinella Assemblage Biozone (Kubergandian), Langella-Geinitzina Assemblage Biozone (Early to Middle Murghabian), Paraglobivalvulina-Pachyphloia Assemblage Biozone (Late Murghabian to Midian), Codonofusiella-Palaeotextolaria Assemblage Biozone(Midian), Frondina-Hemigordius-Cribrogenerina Assemblage Biozone (Dzhulfian). The identified microfossils suggest Kubergandian to Dorashamian ages (Middle to Late Permian) for carbonate sequences of Permian at the study area. On the basis of lithological changes 15 lithozone were also recognized.With regards to lithological and paleontological characteristics and sequence thickness of marine sequence the Illanlu section is proposed as standard section for Middle and Late Permian stages.
T Salehi; M Ghaderi; N Rashidnejad-Omran
Abstract
Gomish-Tappeh Zn-Pb-Cu (Ag) deposit is located in northwestern part of Urumieh-Dokhtar volcano-plutonic zone, 90 km southwest of Zanjan. Exposed rocks at the area include Oligo-Miocene volcano-sedimentary and sedimentary sequences as well as Pliocene dacitic subvolcanic dome, rhyodacitic volcanics and ...
Read More
Gomish-Tappeh Zn-Pb-Cu (Ag) deposit is located in northwestern part of Urumieh-Dokhtar volcano-plutonic zone, 90 km southwest of Zanjan. Exposed rocks at the area include Oligo-Miocene volcano-sedimentary and sedimentary sequences as well as Pliocene dacitic subvolcanic dome, rhyodacitic volcanics and andesite porphyry dykes. The main mineralization at Gomish-Tappeh deposit has occurred in a steeply deeping normal fault and fracture system defined by NE-SW trend in three stages including hydrothermal breccias, silicic-sulfidic, silicic-sulfidic-carbonate veins and veinlets and late banded veins (rich in silica and specularite). Host rocks to mineralization include dacitic crystal lithic tuff, dacitic subvolcanic dome, and specifically acidic tuff. Paragenetic minerals at the deposit consist of pyrite, arsenopyrite, chalcopyrite, bornite, galena, low-Fe sphalerite, tetrahedrite, tennantite and specularite. The main alteration types at the area are silicic, silicic-sulfidic, sericitic, carbonate, argillic and propylitic. Based on element distribution and frequency patterns in the ore samples, among base metals, Zn, Pb, Cu and Ag show the highest concentrations. Average grades in the ore veins at Gomish-Tappeh deposit are: 6% Zn, 4% Pb, 2% Cu, 88 ppm Ag and 44 ppb Au. Fluid inclusion microthermometric studies on quartz crystals of the first and second stages of mineralization indicate homogenization temperatures of 260-367 °C, salinities of 9.1-16.9 wt% NaCl equiv., and approximate mineralization depth of 956 m below the paleowater table. Considering high salinity fluids and base metal contents, it is likely that base metals and silver were transported by chloride complexes. Fluid inclusion studies, hydrothermal breccias, banded-colloform-crustiform textures and amorphous silica indicate that boiling is the main factor for instability of the complexes and eventually, ore deposition.
A Salehpour; B Oveisi; M.R Ghassemi
Abstract
In thin-skinned fold-thrust belts, the style of deformation is critically depends not only on the resistance to sliding along basal detachment, but also on the presence of intermediate decollement levels or/and ductile units within the wedge. In ZFTB the incompetent units known as detachment levels like ...
Read More
In thin-skinned fold-thrust belts, the style of deformation is critically depends not only on the resistance to sliding along basal detachment, but also on the presence of intermediate decollement levels or/and ductile units within the wedge. In ZFTB the incompetent units known as detachment levels like the Gachsaran formation (Shallow level) and the Hormuz salt series (deep) affect strongly the deformation style. However, in many cases shallow level detachment of the Gachsaran unit controls this shallow deformations, but owing to the different facies of this unit in the studied area it is reasonable to other incompetent shallow units (e.g. the middle Miocene Mishan Fm. and the Upper part of Aghajari Fm.) to partially decoupling deformation form the underlying sedimentary units, and have permitted the re-activation of pre-existing syncline structures, through upward extrusion of the syncline core. Owing to the concentration of significant amounts of young deformation across the structure (specially northern hinge) in the style of erosional surfaces, the East-West trending Anve syncline in north of the Bastak town, considered to be one of the most active structures in the region. In this study, we try to define the vertical deformation of a geomorphic marker as well as using tectonic morphology techniques to shed light on the deformation extend and pattern in the eastern and western parts of the structure . However, the microseismic data do not suggest any significant event related to this kind of deformation, but studying deformation style and relative uplift rate estimation could be beneficial dealing with earthquake hazards in the region.
G Jozanikohan; F Sahabi; G.H Norouzi; H Memarian
Abstract
Clay minerals reduce the reservoir quality in different ways. They may cause mechanical problems in drilling and lead to petrophysicalmisinterpretations.Therefore,Clay typing is necessary for upstream petroleum exploration and production industry. In this paper, type, amount and distribution patterns ...
Read More
Clay minerals reduce the reservoir quality in different ways. They may cause mechanical problems in drilling and lead to petrophysicalmisinterpretations.Therefore,Clay typing is necessary for upstream petroleum exploration and production industry. In this paper, type, amount and distribution patterns of different clay minerals in 76 core samples from two producing and non- producing wells inthe ShurijehFormation, aging early cretaceous,were identifiedby six different instrumental analytical methods such as X-Ray diffraction (XRD), X- Ray fluorescence, thin section studies, thermal analysis (DTA-TGA), scanning electron microscopy (SEM) and measuring the cation exchange capacity (CEC). The results proved that the dominant clay minerals are illite, magnesium rich chlorite andkaolinite. The minor clays are glauconite (in the both wells), montmorillonite (in producing well) and mixed layers of illite-montmorillonite and chlorite-montmorillonite. The average amount of each clay minerals in non-producing well is more than producing one. Then clay minerals were classified on the percentage basis into five classes (less than 10%, 10-15%, 15-20%, 20-25% and more than 25%).According to quantityof samples in each class, the producing and non-producing wells were recognized as clean and shaly sand respectively. An increase in glauconite and Illite amounts and also an increase in illite and chlorite layers of mixed-layered clayswith increasing burial depth and temperature is an obvious sign of burial diagenesis in this formation. The best correlation was observed between percentages of clay minerals and iron, aluminum, potassium and magnesium.The clay minerals in the ShurijehFormation are diagenetic alteration of rock fragments, plagioclase and alkali feldspar in origin and in some cases they originate from outside with layered distribution. Distribution pattern of the autogenic clays are pore filling, pore coating and pore bridging, which cause the porosity and permeability reduction in this formation.
N. Kharazizadeh; M. Almasian; Sh. Sherkati
Abstract
Geometric style and deformation analysis of folding are two important aims of geological studies in Zagros, which is related to concentration of considerable of hydrocarbon reservoirs in anticlinal traps of the belt. In this study, evolution and geometry of Aghajari subsurface anticline (Dezful embayment) ...
Read More
Geometric style and deformation analysis of folding are two important aims of geological studies in Zagros, which is related to concentration of considerable of hydrocarbon reservoirs in anticlinal traps of the belt. In this study, evolution and geometry of Aghajari subsurface anticline (Dezful embayment) is considered based on 3D seismic data and well information. Based on illustrated structural cross sections, special attention was paid to geometrical variations of folding from fold pericline to central part of this structure. Geometrical complexity along and normal to the fold axis is related to implication of intermediate soft units in sedimentary pile. Fold evolution analysis shows limb rotation and hing migration which are the main mechanism for fold growth and passing from box to chevron style as well. Development of satellite structure around main anticlines in Zagros is promising features for hydrocarbon entrapment, which related to involment of decollement levels in folding.
L Amirbahador; H Rahimpour-Bonab; M Arian
Abstract
This study is focused on the microfacies and facies associations in the 540 meter-thick interval of the Late Permian Upper Dalan reservoirs in the South Pars Gas Field using the petrographic studies, image analysis techniques and quantitative analysis of the constituting components. The petrographic ...
Read More
This study is focused on the microfacies and facies associations in the 540 meter-thick interval of the Late Permian Upper Dalan reservoirs in the South Pars Gas Field using the petrographic studies, image analysis techniques and quantitative analysis of the constituting components. The petrographic studies led to the recognition of 15 microfacies that formed in four facies associations: peritidal, lagoon, shoal and off shoal. Due to the high frequency of the shoal facies in the Upper Dalan, those have been investigated in details. The relative sea-level changes during deposition of the Upper Dalan member were examined using the vertical microfacies and facies association’s variations. The main focus of this study is to investigate the microfacies variations and depositional environment evolutions in the Upper Dalan member in response to the relative sea-level changes. The frequency analysis of the facies revealed that during the Late Permian, a major fall has been occurred in relative sea-level recorded in the lower (K4 unit) and upper (K3 unit) parts of the Upper Dalan member. In these intervals, the facies change from ooid-bioclastic shoals to the alternative layers of shoal-lagoon-peritidal facies. As well, anhydrite precipitation and dolomitization are prominent diagenetic features, which are indications of climate change. The facies variations were used to reconstruct the relative sea-level changes during deposition of the Upper Dalan member in the South Pars Gas Field. As a result, two and a half third-order and 12 fourth-order cycles have been distinguished.
