سخن سردبیر
سخن سردبیر
سخن سردبیر
سخن سردبیر
در این تحقیق از سامانه پشتیبان تصمیم (Decision Support System: DSS) برای حمایت مدیران در تصمیمگیری در مورد وضعیت روستاهایی که در معرض خطر زمینلغزش قرار دارند استفاده شده است. هدف از کاربرد این سامانه، ارائه روش بهینه برخورد با خطر بروز زمینلغزش در مناطق روستایی میباشد. برای تصمیمگیری در این مورد از نرمافزار دفنیت (Definite) از سامانه پشتیبان تصمیم استفاده شده است و مدلی برای آن تنظیم شده که شامل سه راهکار: تثبیت زمینلغزش، اجتناب از خطر لغزش (جابهجایی روستا)، و پذیرش ریسک و با مد نظر قرار دادن چهار تأثیر (اثر) هزینه، کاهش خسارت جانی، نظر مردم و نظر مدیران محلی در مورد هر راهکار میباشد. این راهکارها از لحاظ چهار اثر مذکور سنجیده و با هم مقایسه میشوند تا در نهایت راهکار بهینه از بین آنها انتخاب گردد. برای تعیین هزینه راهکار تثبیت ابتدا بایستی تعیین نمودکه آیا زمینلغزش با روشهای معمول در کشور قابل تثبیت هست یا خیر؟ این کار با استفاده از نرمافزار دیگری از سامانه پشتیبان تصمیم انجام میگیرد. پس از تعیین جزئیات روش، هزینههای لازم برای آن برآورد میگردد. مقادیر بقیه اثرها نیز برآورد شده و بدین ترتیب کاربر میتواند با وارد نمودن این اطلاعات در مدل، گزینه بهینه را انتخاب نماید. بررسی موردی زمینلغزش باریکان توسط این مدل انجام گرفته و راهکار تثبیت زمینلغزش به عنوان مناسبترین راهکار برای برخورد با معضل زمینلغزش در این منطقه پیشنهاد شده است. نتایج با بررسیهای میدانی و جامع انجام یافته در این خصوص مطابقت دارد.
In this research a Decision Support System (DSS) has been used to support decision makers for policy making regarding the landslides which typically take place around villages. Definite software was utilized to design a model which include three strategies: landslide stabilization, village relocation, and risk acceptance. The model introduces the optimal strategy considering four effects (i.e., cost, reduction of fatalities, peoples and local manger point of views). To determine the cost of stabilization, in the first step the stabilization method should be selected. This is also is performed using the other DSS system. In the next step, the cost of stabilization is computed. The cost for the other alternatives is also assessed. The other effects are evaluated for the other alternatives. The user can select the optimal method for a certain landslide after completing the designed questionnaires regarding engineering geological characteristics, reduction of fatalities, people and local manger point of views. The Barikan landslide in Taleghan region was studied using the model. The stabilization method was selected as the most appropriate strategy for the landslide. The selected alternative is in a good agreement with those presented as the results of site investigation.
بر اساس نقشههای تاریخی IRAN & TURAN (1872)، تغییر دهانه خروجی سپیدرود در دریای کاسپین از دستک به کیاشهر در طی سالهای نهچندان گذشته انجام گرفته است. اگرچه مهاجرت جانبی گسترده رودخانههای مآندری در دلتا دور از انتظار نیست و نوسانهای تراز دریای کاسپین در تغییر سطح اساس این رود نقش مهمی داشته است، اما انحراف سپیدرود و تشکیل خم بزرگ آن بین کوچصفهان و آستانه به احتمال در ارتباط با فعالیت ساختارهای پنهان منطقه است. در این پژوهش سعی شده است با بررسی الگوی حوضه آبریز منطقه و با استفاده از شاخصهای ریخت- زمینساختی به تأثیر فعالیت گسل کاسپین (خزر) به عنوان مرز جلگه کاسپین و کوههای البرز بر الگوی رودهای منطقه و بررسی گسلهای مرز پیشانی کوهستان پرداخته شود.
According to historical maps of Iran, changing the course of Sepidrud from Dastak to Kiyashahr has occurred in a very recent time. Although migration of meandering streams over the delta plain is a natural phenomenon and oscillations of Caspian Sea might have affected the course of SepidrudRiver, the deflection of Sepidrud between Astaneh and Koochesfahan is probably related to activity of concealed structures wit hin the delta deposits. This research uses calculation of morphotectonic indexes to study effects of active range boundary within range faults in study area on drainage pattern and river streams.
در این مطالعه سازند آب تلخ (برش مزدوران)که در کپه داغ برونزد دارد مورد مطالعه قرار گرفته است. قاعده مارنی این سازند روی سنگآهک سازند آبدراز قرار دارد و لایههای بالایی آن به سن ماستریشتین پسین با رسوبات ماسهای سازند نیزار به صورت تدریجی پوشیده شده است. سازند آب تلخ به دلایل گوناگون، بخصوص ویژگیهای سنگی و زیستی، به خوبی قابل مقایسه با واحد مارنهای اکینیددار ایران مرکزی است. شباهتهای یاد شده سبب شد که این واحدها را در برش مزدوران (کپه داغ) و برش بهارستان (اصفهان) مقایسه کنیم. با مطالعه 100 نمونه از این دو برش، به شباهتهای دیرینشناسی و سنگی زیادی دست یافتیم که شواهد محیطی و دیرینهبومشناختی این شباهت را تأیید میکند. این دستاورد، میتواند بیانگر پیوند نزدیک دو حوضه کپه داغ و ایران مرکزی باشد. شواهد فسیلی که در این دو برش یافت شده است عبارتند از : Globotruncana ventricosa (White), Globotruncanita elevata (Brotzen) Globotruncana arca (Cushman), Globotruncanita stuartiformis (Dalbiez) Globotruncana bulloides Volger, Globotruncana lapparenti Brotzen Globotruncanita calcarata (Cushman), Globotruncana linneiana (d' Orbigny)
The first studied Abtalkh Formation with Campanian – Maastrichtian age is well exposed in Kopeh Dagh area (Mozduran section). This formation conformably underlain carbonates of Abderaz Formation and overlain by Neyzar sandeston Formation, both formations have a gradual contact. The second studied formation so called Echinid marl formation of Santonian –Late Campanian age is exposed in Baharestan section, Central Iran, Esfehan area. Based on 100 studied samples, there are litological and paleontological similarities between Abtalkh and Echinid marl formations. These evidences support strongly paleoecological and environmental similarities. This ascertainment shows the close relation between the Kopeh Dagh and Central Iranbasins. The fossil evidences found in both sections are as follow: Globotruncana ventricosa (White), Globotruncanita elevata (Brotzen) Globotruncana arca (Cushman), Globotruncanita stuartiformis (Dalbiez) Globotruncana bulloides Volger, Globotruncana lapparenti Brotzen Globotruncanita calcarata (Cushman), Globotruncana linneiana (d' Orbigny)
با توجه به فراوانی نسبی و محدوده چینهشناسی کوتاه و گسترش جغرافیایی وسیع نانوفسیلهای آهکی، این گروه از فسیلها ابزار بسیار مناسبی برای زیرتقسیمبندی زیستچینهشناختی، بویژه در کرتاسه پسین هستند. بدین سبب و به علت نبود مطالعات دقیق فسیلشناسی، نانوپلانکتونهای آهکی در برش الگوی سازند نیزار مورد مطالعه قرار گرفته است. سنگشناسی سازند شامل ماسهسنگهای ستبر لایه گلوکونیتی، شیل و یک لایه سنگ آهک ماسهای در بخش بالایی است. بر مبنای مطالعات انجام شده، 22 جنس و42 گونه نانوفسیل در برش الگو شناسایی و عکسبرداری گردید. با توجه به گسترش چینهشناسی نانوپلانکتونهای آهکی، بازه زمانی برش مورد مطالعه، با زونهای CC25 وCC26 از زونبندی Sissingh (1977) و زیرزونهای CC25c وCC26a و CC26b از زونبندی Perch – Nielsen(1985a) همخوانی دارد. بر مبنای زیستزونهای مشخص شده، سن سازند نیزار در محل برش الگو ماستریشتین پسین پیشنهاد میگردد.
Nannofossils are suitable for biostratigraphical studied since they are aboundant, planktonic, rapidly evolving and largly cosmopolitan, especially in Late Cretaceous. According to this, due to the lack of any precise Paleontological study, the nannofossils of Neyzar Formation has been investigated in type locality. This formation consists of thick- bedded glauconitic sandstone,shale and a sandy limestone bed in the upper part. The Neyzar Formation conformably overlies the Abtalkh Formation and is itself conformably overlained by the Kalat formation. As a result of this study, for the first time, 22 genera and 42 species of nannofossils have been identified. Based on these obtained nannofossils, the section is Late Maasrichtian in age, corresponding to CC25- CC26 (Sissingh,1977) (equivalent to CC25c-CC26a-b, Perch- Nielsen,1985).
یکی از ابزارهای مناسب که در تفسیر ناپیوستگیهای ساختاری و رخسارههای چینهشناسی درون مکعب دادههای لرزهای سهبعدی به مفسر کمک میکند، نشانگر لرزهای همدوسی است. اندازهگیریهای همدوسی در سه بعد، تشابه ردلرزه به ردلرزه را بیان میکنند و بنابراین تغییرات قابل تفسیر را در این گونه موارد نشان میدهند. ردلرزههای مشابه با ضرایب همدوسی بالا به نقشه در میآیند، در حالی که بیهنجاریها مانند ناپیوستگیها، ضرایب همدوسی پایینی دارند. همدوسی لرزهای معیار سنجش تغییرات جانبی در پاسخ لرزهای که علل آن میتواند ساختار زمینشناسی، چینهشناسی، سنگشناسی، تخلخل و وجود هیدروکربن باشد را نمایان میسازد. خروجی این نشانگر، مکعب همدوسی لرزهای سهبعدی است که ناپیوستگیهای ساختاری و رخسارههای چینهشناسی را با قدرت تفکیک بالاتری به تصویر میکشد. در این مقاله، کاربرد دو نشانگر لرزهای همدوسی متداول بر مبنای همبستگی عرضی و ساختار ویژه در شناسایی گسلها روی دادههای لرزهای مصنوعی و واقعی نشان داده میشود. با بررسی نتایج بهدست آمده در این روش، میتوان مشاهده کرد که این روش برای مدلهای مصنوعی برای نسبت سیگنال به نوفههای پایین و برای داده واقعی پاسخ مناسبی میدهد. همچنین مقایسه روش همدوسی بر مبنای ساختار ویژه با روش همدوسی بر مبنای همبستگی عرضی نشان میدهد که قدرت تفکیک آن برای تشخیص گسلها بیشتر است.
Coherency attribute is one of the proper tools in interpretation of structural discontinuities and stratigraphy features in 3-D seismic data. Coherency measurements in three dimensions discuss trace-to-trace similarity and therefore represent interpretable changes in these cases. The similar traces are mapped with high coherence coefficients while anomalies and discontinuities have low coherence coefficients. Coherency attribute shows evaluation criterion of lateral changes in the seismic response, caused by variation in structure, stratigraphy, lithology, porosity and the presence of hydrocarbon. Output of this attribute is a coherence cube which illustrates structural discontinuities and stratigraphy features with higher resolution. In this paper, the application of two conventional coherency attributes based on eigenstructure and crosscorrelation for detection of faults in 3-D synthetic seismic data and actual seismic data is presented. Considering the experimental results, this method has an appropriate response to low SNR for 3-D synthetic models and 3-D actual data. In addition, the comparison of eigenstructure -based coherency attribute method with crosscorrelation-based coherency attribute method indicates the former has higher resolution for detection faults than the latter.
این تحقیق به منظور بررسی امکان پرعیار سازی کانسار آنتیموان لخشک با استفاده از روش فلوتاسیون انجام شده است. عیار آنتیموان در نمونه 23/17 درصد است. مهمترین کانیهای موجود در نمونه، استیبنیت، کوارتز و پیریت و درجه آزادی ذرات استیبنیت 210 میکرون است. برای فرآوری کانسار آنتیموان لخشک، نمونه اولیه از نظر دانهبندی به سه بخش تقسیم شد و پر عیار سازی بخش دانه ریز آن (38+210- میکرون) به روش فلوتاسیون بررسی شد. عیار بار ورودی به فلوتاسیون 50/20 درصد است. در انجام آزمایشهای فلوتاسیون از روش آماری تاگوچی استفاده شد و پارامترهای مؤثر در فرآیند بهینه شدند. پارامترهای بهینه فلوتاسیون شامل فعال کننده سولفات مس با غلظت 1700 گرم بر تن، کلکتور امیل گزنتات پتاسیم با غلظت 900 گرم بر تن، درصد وزنی جامد در پالپ 22 درصد و دانهبندی 38+150- میکرون تعیین شد. همة آزمایشها در pH طبیعی (8/6) انجام شد و کف ساز مورد استفاده نیز MIBC بود. در این شرایط کنسانترهای با عیار 38 درصد Sb و بازیابی 91 درصد به دست آمد.
An investigation on beneficiation of Lakhshak antimony ore was carried out using flotation methods. The grade of antimony in representative sample was 17.23%. The most important minerals were stibnite, quartz and pyrite and the degree of liberation of stibnite was found to be 700 micrometer. The raw material was divided into three size fractions and beneficiation of fine size fraction (-210+38 m) was floated. The grade of mentioned fraction was 20.50 %. Taguchi method was used in flotation tests and optimum conditions were determined as follows: CuSO4 (1700g/t) as an activator, potassium etyle xanthate (900 g/t) as a collector, MIBC as a frother, pulp density 22% and grain size -150+38 m. All the experiments were carried out at pH = 6.8. As a result the grade and recovery of antimony was obtained 38% (Sb) and 91% respectively.
زمینلرزة 11 فروردین 1385(31 مارس 2006م) با بزرگای گشتاوری 1/6، روستاهای منطقة درب آستانه (سیلاخور) در استان لرستان را ویران کرد. ناحیة رومرکزی این رویداد در قلمرو زون گسل اصلی معاصر(Main Recent Fault,MRF) و سازوکار راستالغز راستگرد آن نیز مشابه دیگر زمینلرزههای این سامانة گسلی است. این زمینلرزه با پسلرزههای نسبتاً فراوانی همراه بوده که در این تحقیق، توالی پسلرزههای آن با استفاده از معیارهای کمی ضریب تغییرات (coefficient of variations,Cv)، توان تابع چگالی طیفی(power spectral density) و ابعاد فراکتالی تعمیم یافته (generalized fractal dimensions) مورد مطالعه قرار گرفته است. شاخصهای کمی محاسبه شده حاکی از وجود ساختار فراکتالی (fractal structure) در توزیع زمانی و مکانی پسلرزههای این زمینلرزه است. مشاهدة رفتار فراکتالی علاوه بر تأیید وجود خوشهبندی در توزیع پسلرزهها، دلیلی بر ناهمگنی وضعیت زمینشناسی و ژئودینامیکی منطقة کانونی زمینلرزه نیز هست. نتایج به دست آمده نشان میدهد با گذشت زمان ابعاد چندفراکتالی توالی زمانی پسلرزهها کاهش و ابعاد چندفراکتالی مراکز سطحی آنها افزایش یافته است. به نظر میرسد این تغییرات ناشی از تغییر رژیم تنش زمینساختی و تأثیر گسلهای فرعی و همراه (secondary and sympathetic faults) باشد. نتایج به دست آمده همچنین دلالت بر کاربرد مؤثرتر روش چندفراکتالی نسبت به روشهای فراکتالی ساده برای مطالعه رفتار خوشهبندی فرایند پسلرزهای دارد.
The 31 March, 2006 earthquake with Mw=6.1 destroyed villages in the Darb-e-Astaneh (Silakhor) region of the Lurestan province. The epicenteral area of this earthquake lies near the Main Recent Fault (MRF) and its right lateral mechanism indicates that it belongs to this fault zone. The main shock was followed by relatively large number of aftershocks. In this research, the aftershock sequence of this earthquake has been studied by measuring quantitative indices of coefficient of variations (CV), the exponent of the power spectral density function, and the generalized multifractal dimensions. The results reveal the presence of fractal structure in the temporal and spatial distribution of aftershock sequence. The multifractal behavior of the aftershock sequence indicates the clustering of the earthquake activity and the degree of the heterogeneity in the seismotectonic and geodynamic processes in the focal region. The results show that the multifractal dimensions of the aftershock sequence decreases and the multifractal dimensions of aftershock epicenters increases with time. It seems that these changes in the multifractal dimensions are related to the activity of secondary and sympathetic faults and changes in the tectonic stress regime of the region. The results also indicate that the multifractal method rather than monofractal approaches is a powerful tool for quantitative analysis of aftershock process's clustering behavior.
کانسار تنگستن (مس-روی) چاهکلپ در محدوده بلوک لوت قرار دارد. این بلوک جزیی از سکوی پالئوزوییک ایران مرکزی است، که به شدت تحت تأثیر حرکات کوهزایی کیمرین پسین قرار گرفته است. توالی آتشفشانی- رسوبی تریاس بالایی- ژوراسیک که کانهزایی چاهکلپ را در بر دارد، تا حد رخساره شیست سبز- آمفیبولیت پایینی دگرگونشده است. این توالی، از قدیم به جدید شامل شیست متاپلیتی سیلیسی، توف فلسیک دگرگونشـده زیرین، آهک دگرگون شده با میان لایههایی از متاچرت (که افق کانهدار اصلی در قاعده آن تشکیل شده است)، تناوب سنگآهک میکریتی و اسپاریتی دگرگون شده، توف فلسیک دگرگون شده بالایی و ریولیت میلونیتی است. در سنگآهک دگرگونشده، سه رخساره مختلف تشخیص داده شد که کانهزایی محدود به بخشهای چرتی رخساره سنگآهک چرتدار است. در محدوده کانسار چاهکلپ، توده نفوذی برونزد نداشته و دو سامانه گسل امتداد لغز، با راستای شمال باختر-جنوب خاور و شمال خاور-جنوب باختر در منطقه دیده میشود. کانهزایی در کانسار چاهکلپ بوضوح چینهسان بوده و با شکل لایهای و عدسی شکل تا دو کیلومتر قابل پیگیری است. بر اساس مطالعات انجام شده، شش افق کانهدار در توالی آتشفشانی-رسوبی منطقه معدنی چاه کلپ مشاهده شده است که از قدیم به جدید عبارتند از: افق کانهدار سولفیدی I با سنگ درونگیر شیست متاپلیتی سیلیسی، افق کانهدار سولفیدی II با سنگ درونگیر توف فلسیک دگرگونشده زیرین، افق کانهدار سولفید-شیلیت III که سنگ درونگیر آن سنگ آهک دگرگونشده حاوی عدسیها، ریزلایهها و نوارهای متاچرتی است که در قاعده آهکها قرار دارد. افق کانهدار سولفید- شیلیت IV که در بخشهای میانی سنگآهک دگرگون شده قرار دارد. افق کانهدار سولفید- شیلیت V که در بالاترین بخش سنگآهک دگرگونشده و در مرز بالایی سنگ آهک دگرگونشده و توف فلسیک قرار دارد و بالاخره افق کانهدار سولفیدی VI که در داخل ریولیت میلونیتی قرار میگیرد. کانهزایی اقتصادی کانسار چاهکلپ به ضخامت متغیر چند سانتیمتر تا 6 متر در مرز پایینی سنگآهک چرتدار دگرگونشده با توف فلسیک دگرگونشده و در داخل سنگآهک دگرگونی رخ داده است. بخشهای چرتدار دگرگونشده، که به صورت یک افق کلسیمی-سیلیکاتی، همراه با آهک دگرگون شده تشکیل شده، در اثر دگرگونی ناحیهای حاوی ترمولیت، اکتینولیت، دیوپسید، هدنبرژیت و گراسولار شده است. بافت ماده معدنی در افقهای کانهدار به صورت تودهای، دانه پراکنده، ریزلای، پر کننده فضاهای خالی و برشی بوده و کانیشناسی آن شامل شیلیت، کلکوپیریت، اسفالریت، پیریت، آرسنوپیریت، پیروتیت، کوولیت، بورنیت، کالکوسیت، آزوریت، مالاکیت و اکسید- هیدروکسیدهای آهن است. محیط تشکیل کانسار چاهکلپ، حوضه کافت درون قارهای بوده است که محیط مناسبی را برای فعالیت آتشفشانی زیر دریایی و نهشت مجموعههای آتشفشانی-رسوبی فراهم نموده است. در کانسار چاهکلپ، کانهزایی به صورت دور دست و همزمان با رسوبگذاری بروندمها (Exhalites) رخ داده است. فرایند دیاژنز موجب تبلور و تمرکز کانهها گردیده و سپس دگرگونی ناحیهای تمرکز بیشتر کانهها را موجب گردیده است.
Chah-Calap W (Cu-Zn) deposit is located in Lut Block. It is a part of Central Iran Paleozoic platform which has been subjected to late Cimmerian orogenic movements. Chah-Calap ore- bearing volcano-sedimentary sequence of upper Triassic-Jurassic age was metamorphosed to green schist-lower amphibolite facies. This sequence includes siliceous meta-pellite, lower meta-felsic tuff, meta-limestone with meta-chert interlayers, (main mineralized horizon occurred at the base of it) alternation of micritic and sparitic limestone, upper meta-felsic tuff and mylonitic rhyolite. In meta-limestone, 3 facies were recognized, in which the mineralization corresponds only to meta-chert bearing facies. No intrusive body outcrops in the study area. Two NW-SE and NE-SW trending fault systems can be observed in Chah-Calap mining region. The stratiform mineralization with layering and lenticular geometry has 2 kilometer length. Based on these investigations, six mineralized horizons can be distinguished in Chah-Calap volcano-sedimentary rocks: siliceous meta-pellite (ore horizon I), lower meta-felsic tuff (ore horizon II), calc-silicate layers, bands and lenses occurring at the contact between meta-limestone and lower meta-felsic tuff (ore horizon III), at the middle of meta-limestone layer (ore horizon IV) and at the upper contact between meta-limestone and upper meta-felsic tuff (ore horizon V) and mylonitic rhyolite host rocks (ore horizon VI). Main mineralized horizon in Chah-Calap occurred at the base of meta-cherty limestone, at lower contact between meta-carbonate and lower meta-felsic tuff. Regionally metamorphosed chert-bearing parts of meta-limestone, forming calc-silicate horizon, composed mainly of sparitic calcite, tremolite, actinolite, diopside, hedenbergite and grassular-rich garnet. Ore assemblage includes: scheelite, chalcopyrite, sphalerite, pyrite, arsenopyrite, pyrrhotite, covelite, bornite, chalcocite, azurite/malachite and iron-oxide/hydroxides having massive, disseminated, laminated, breccia like and open space filling textures. Tungsten mineralization in Chah-Calap is considered to be of distal syn-sedimentary-syn-diagenetic type with exhalative origin. Diagenetic processes lead to primary concentration of mineralization which later experienced remobilization and re-concentration during regional metamorphism.
خواص مغناطیسی و الکترواستاتیکی کانیها، یکی از مهمترین ویژگیهای مورد استفاده در صنعت فرآوری برای پرعیارسازی مواد معدنی است. مطالعات کانیشناسی و تعیین درجه آزادی کانسنگ اورانیم خشومی با عیار میانگین ppm 1540 اورانیم با روش XRD و مطالعات میکروسکوپی انجام گرفت. بر اساس این مطالعات، کانیهای اصلی ارتوکلاز، آلبیت، بیوتیت، کلریت، کربنات و کانیهایی فرعی اسفن، زیرکن، آپاتیت، پیچبلند و بتافیت شناسایی شدند. همچنین درجه آزادی کانیهای ارتوز، آلبیت و بیوتیت به ترتیب 365، 250 و 210 میکرون و درجه آزادی کانیهای اورانیم حدود 110میکرون به دست آمد. بر اساس مطالعات کانیشناسی و درجه آزادی، آزمایشهای مغناطیسی و الکترواستاتیکی بر روی کسرهای(فراکسیون)250+420- ، 125+250- و 74+125- میکرون انجام گرفت. آزمایشهای مغناطیسی توسط جداکنندة خشک و تر شدت بالای هیمز و آزمایشهای الکترواستاتیکی توسط جداکنندة صفحهای انجام شد. بیشترین بازیابی به دست آمده در آزمایشهای مغناطیسی خشک و تر به ترتیب 03/45 و 99/26 درصد بود. بیشترین بازیابی به دست آمده در آزمایشهای الکترواستاتیکی نیز 36/51 درصد بود که در این حالت 63/27 درصد اورانیم در 02/42 درصد وزنی بار اولیه به صورت باطله خارج میشود. در کل این دو روش به دلیل پایین بودن کارایی جدایش آنها در پرعیارسازی نمونههای کانسنگ اورانیم این معدن، پیشنهاد نمیشوند.
Magnetic and electrostatic properties of minerals are the important characterizations used in mineral processing technology for concentration of minerals. Mineralogy and degree of liberation of the ore with a uranium average content of 1540 ppm, has been studied by XRD and microscopic methods. Major minerals such as alkali feldspar (Orthoclase), plagioclase (Albite), biotite, chlorite, carbonate and minor minerals such as sphene, zircon, actinolite, tremolite, pitchblende and betafite have been identified in this ore. Additionally, the degree of liberation of orthoclase, albite, biotite and uranium minerals was determined 320, 290, 190 and 110 microns respectively. Based on the results of mineralogy and degree of liberation studies, magnetic and electrostatic tests have been performed on fractions: -420+250, -250+125 and -125+74 microns. High intensity magnetic tests in two ways, wet and dry separations were done by HIMS separator and plate separator. Analyses of magnetic test results showed that the separation has low recovery. Recovery for dry and wet methods was 45.03 and 26.99% respectively. Analyses of electrostatic test results showed that the maximum recovery of these tests is 51.36% uranium and in this state 27.63% uranium in 42.02 weight percent of feed is rejected. Generally, the recovery of these separations was low, so these methods are not suitable for concentration of this ore.
کانسار آهن سنگان خواف در حدود 300 کیلومتری جنوب خاوری مشهد واقع است. این معدن به دلیل عیار بالای آهن، پایین بودن میزان فسفر و ذخیره زیاد، از مهمترین ذخایر آهن ایران است. کانیسازی از نوع اسکارن مگنتیتی است. این ذخیره در تقسیمبندی جدید نیز جزو ذخایر مگنتیت (اکسید آهن) قرار گرفته است. براساس رخنمون سطحی، اسکارن در بخش باختری از نوع همبری با ترکیب کلسیمی و به سمت خاور بهتدریج به نوع حاشیهای و با ترکیب منیزیمی تبدیل میشود. کانیشناختی زونهای اسکارنی بخش باختری (توده مگنتیت A') شامل آندرادیت، آمفیبول دما بالا، مگنتیت و کلسیت است. تودههای مگنتیت بخش C, B, A-جنوبی حاوی ریپدولیت، فرواکتینولیت، سیدریت و مقدار اندکی پیریت است. تودههای مگنتیت محدودههای -C شمالی و باغک حاوی مگنتیت غنی از منیزیم، فلوگوپیت، کلینوکلر، فورستریت، دولومیت، تالک، پیریت ± پیروتیت ± کلکوپیریت ± آرسنوپیریت است. بیشترین مقدار سولفید در این دو منطقه یافت میشود. سنگ منشأ شناسایی شده در این تحقیق (در منطقه A') از نوع اولتراپتاسیک با K2O بیش از 9 درصد است. گرانیت سرنوسر که تاکنون به عنوان سنگ منشأ مطرح بوده، K2O کمتر از 5 درصد دارد، لذا با شناسایی سنگ منشأ نوع اولتراپتاسیک، گرانیت سرنوسر نمیتواند سنگ منشأ باشد. میزان K2O در گرانیت سرنوسر نزدیک به زونهای اسکارنی افزایش مییابد که حاصل دگرسانی است. محلول کانهدار که از مرز گرانیت سرنوسر و سنگ آهک جابه جا میشده است، ضمن تشکیل اسکارن باعث دگرسانی گرانیت سرنوسر نیز شده است. براساس مطالعات میکروسکوپی و محاسبه نورم، سنگ منشأ آهن در حد کوارتز هورنبلند سینیت پورفیری و کوارتز بیوتیت هورنبلند سینیت قلیایی پورفیری و سنگهای جوانتر در حد بیوتیت گرانیت، بیوتیت هورنبلند کوارتزمونزونیت پورفیری و کوارتز سینیت پورفیری هستند. پتاسیم در منطقه سنگان، نوع کانیسازی اسکارن را کنترل کرده است. در اسکارن همبری (توده A') آمفیبول غنی از پتاسیم، کلر و فلوئور و در اسکارن حاشیهای (توده C و باغک) فلوگوپیت (حاوی پتاسیم و فلوئور) تشکیل شده است.مقایسه برخی عناصر جزئی سنگ منشأ سنگان و گرانیت سرنوسر نشان میدهد که مقدار Rb، Zn، Zr و Nb در سنگ منشأ بالاتر و عناصر Sr و Cu در سنگهای منشأ پایینتر از سرنوسر است.مقایسه عناصر فرعی سنگهای جوانتر با سنگ منشأ آهن نشان میدهد که: 1) مقدار Cr، Ni، Zr، Ce، Cu، Sr و La در تودههای جوانتر بیشتر است و 2) مقدار روبیدیم در تودههای جوانتر کمتر از سنگ منشأ آهن است.
Sangan Iron ore deposit is located 300 km southeast of Mashhad (Eastern Iran). Based on the high grade, low P- content and big ore reserve, Sangan is an important Iron mine in Iran. It is a magnetite skarn and can be classified as iron-oxide type deposit. Based on the surface exposure, the western magnetite skarn (A´), a Ca-rich type skarn, was formed at the contact of intrusive. Eastward, the skarn gradually becomes distal and Mg-type. The A´ magnetite skarn contains andradite, magnetite, K-rich amphibole, hedenbergite and calcite. Magnetite skarn in A, B, and C- south contain magnetite, repidolite, ferro-actinolite, siderite and minor pyrite. Baghak and C- north magnetite skarn comprise Mg-rich- magnetite, phlogopite, chinochlore, talc, dolomite, forsterite, dolomite, pyrite ± chalcopyrite ± arsenopyrite ± pyrrhotite. High S-content is found mainly in Baghak and C-north deposits. In this research, the igneous source rock is found in A´ deposit and identified as ultra-potassic type (K2O> %9). Sarnowsar granite which used to be the source rock for Iron, contains less than %5 K2O, therefore it cannot be the source. The K2O content of Sarnowsar granite increases near the magnetite skarn due to alteration. The Fe-ore bearing solution moved along the contact between Sarnowsar granite and the limestone. Sarnowsar granite was altered and skarn formed in the limestone. The source rock is quartz biotite-hornblende alkali syenite to quartz hornblende syenite porphyry. The younger intrusive rocks are biotite granite, biotite-hornblende quartz monzonite porphyry and quartz syenite porphyry. Potassium within the ore bearing solution controlled the mineralogy of skarn. Contact skarn in A´ magnetite deposit comprises K-rich amphibole and distal skarn (Baghak and C-north) contains phlogopite. Comparison of trace elements from source rocks with Sarnowsar granite indicates that the Nb, Zr, Zn and Rb contents are high in the former rocks and Cu and Sr ones are higher in the latter rock. Furthermore, comparison of some trace elements from source rocks with younger intrusive rocks indicate that Cr, Ni, Zr, Ce, Cu, Sr, and La contents are higher in younger intrusive and Rb content is higher in source rocks.
توده گرانودیوریتی لخشک در 10 کیلومتری شمال باختر زاهدان واقع شده و به صورت بیضوی شکل با امتداد شمالباختر-جنوبخاور در رسوبات فلیشی ائوسن نفوذ کرده است. این توده، پس از جایگزینی مورد هجوم تعداد زیادی دایک موازی با روند شمالخاور-جنوبباختر قـــرار گرفته است. دایکها حدود 30-20 درصد حجم توده را به خود اختصاص دادهاند و دامنه ترکیبی گستردهای از گرانودیوریت تا مونزودیوریت دارند. سنگهای توده نفوذی لخشک از نوع کلسیمی- قلیایی و غالباً متاآلومین بوده و از لحاظ فراوانی P2O5 و Th در برابر SiO2 ، مشابه گرانیتهای نوع I است. مقدار TiO2 این سنگها در محدوده مقادیر TiO2 گرانیتهای حاشیه قاره قرار میگیرد. مقادیر MgO، Na2O، Ni، Cr، عدد Mg و فقیر شدگی این سنگها از Y با مذابهای آداکیتی حاصل از ذوب بخشی پوسته اقیانوسی جوان شبیه است. مقدار پایین Ba/La سنگهای مورد مطالعه بیانگر ذوب بخشی پوسته اقیانوسی فرورو قبل از بیآب شدن آن است. این سنگها از عناصر LIL و LREE غنی شدگی نشان میدهند در حالی که از عناصر HREE و Y تهی شدهاند و دارای بیهنجاری منفی Nb، Ta، P، Ti و بیهنجاری مثبت Pb میباشند. بیهنجاری منفی Nb و Ta بیانگر نقش پوسته اقیانوسی در متاسوماتیسم گوه گوشته است. بیهنجاری مثبت Pb به آلایش ماگما با پوسته قارهای و متاسوماتیسم گوة گوشتهای اشاره دارد. به نظر میرسد که تشکیل توده گرانودیوریتی لخشک میتواند با فرورانش پوسته اقیانوسی جوان سیستان به زیر بلوک افغان در ارتباط باشد. همچنین مقادیر پایین HREE، 13/15>Y، 2/1>Yb، وجود میانبارهای آمفیبولیتی و کاهش مقدار Yb نسبت به افزایش SiO2 در این سنگها، با ذوب بخشی آمفیبولیتهای حاصل از فرورانش سنگکره اقیانوسی به ژرفاهای بیش از 35 کیلومتر سازگار است.
The Lakhshak granitoid pluton which is located at 10 km northwest of Zahedan, has intruded into the Eocene flysch sediments with an elliptical shape and NW-SE direction. This pluton after emplacement has been cut by numerous dykes with NE-SW trend. These dykes comprised about 20-30% of the Pluton with various compositions, ranging from granodiorite to monzodiorite in composition. The Lakhshak plutonic rocks are mainly metaluminous, calc-alkaline and belong to I type granites based on the P2O5 and Th content versus SiO2. Regarding TiO2 content these rocks resemble the continental margin granites. The MgO, Na2O, Ni, Cr content as well as Mg# and depletion in Y, these plutonic rocks are similar to the adakite, a rock type produced by partial melting of young oceanic crust. The low Ba/La content of the studied samples may suggest that subducted slab suffered dehydration prior to partial melting. These rocks are enriched in LIL, LREE, however, they are depleted in HREE and Y. In addition, they show negative anomalies of Nb, Ta, P and Ti, and positive anomaly of Pb. The negative anomalies of Nb and Ta may indicate the effect of mantle wedge metasomatism by oceanic crust. The positive anomaly of Pb may demonstrate continental crust assimilation by magma associated with mantle metasomatism. It seems that Lakshak pluton has been formed by subduction of Sistan young oceanic crust under the Afghan Block. Moreover, the low content of HREE and Y besides a decreased ratio of Yb versus SiO2, Y<15.13, Yb<1.2 and existence of amphibolite enxenoliths in these rocks may suggest partial melting of amphibolites. The latter is formed during the oceanic crust subduction in depth more than 35 km.
حوضه کپه داغ همزمان و پس از برخورد صفحه توران به صفحه ایران پیش از کارنین پسین (در حدود 225 میلیون سال پیش) تشکیل شده است. این حوضه در شمال خاور ایران و در راستای WNW تا ESE قرار گرفته است. سازند نیزار در خاور و شمال خاور این حوضه گسترش یافته و از مجموعهای از سنگهای سیلیسی- آواری، شیلهای ماسهای همراه با لایههایی از سنگ آهکهای ماسهای تشکیل شده است. به منظور شناخت دقیق چینهشناسی، میکروفسیلها، ریز رخسارهها و محیط رسوبی سازند نیزار، سه برش چینهشناسی انتخاب، اندازهگیری و به دقت از آنها نمونهبرداری شده است. این برشهای چینهشناسی از خاور به باختر عبارتند از 1) برش تنگ نیزار 2) برش تنگ چهچهه 3) برش جلیل آباد- کلات نادری. در مطالعات پیشین، مرز زیرین و بالایی سازند نیزار با سازندهای آب تلخ و کلات به ترتیب به صورت همشیب و انتقالی گزارش شده است (افشار حرب،1373). اما بر اساس تحقیقات جدید، مرز زیرین سازند نیزار با سازند آبتلخ در برشهای 1 و2 به صورت ناپیوستگی فرسایشی و در برش شماره 3 به صورت همشیب و انتقالی است. مرز بالایی سازند نیزار با سازند کلات در هر سه برش مذکور به صورت یک ناپیوستگی فرسایشی همراه با یک لایه دیرینهخاک Paleosoil)) در بین آن دو است. بر اساس مطالعات سنگشناسی و ریز دیرینهشناسی، دو نوع رخساره سیلیسی- آواری و کربناتی تعیین شده است. با بررسی این ریز رخسارهها به نظر میرسد که بخشهای سیلیسی- آواری (ماسهسنگ و شیل) سازند نیزار در یک محیط جزایر سدی- لاگونی و قسمتهای آهکی آن در یک سکوی کربناتی کمژرفا (از نوع رمپ) بر جای گذاشته شدهاند. در بیشتر گزارشها و مقالات منتشر شده، سازند نیزار به عنوان یک سازند کم فسیل گزارش شده که هیچگونه فسیل شاخصی نداشته و تنها بر اساس جایگاه چینهشناسی سن آن را تعیین میکردند، اما با بررسیهای به عمل آمده در این تحقیق، برای نخستین بار علاوه بر شناسایی41 جنس و30 گونه، فسیلهای شاخصی مانند: Orbitoides tissoti, Siderolites calcitrapoides,Abathomphalus mayaroensis,Pseudosiderolites vidali,Lepidorbitoides sp., Orbitoides apiculataشناسایی شده که همگی گویای سن ماستریشتین و بویژه ماستریشتین پسین هستند.
The Kopet Dagh basin was formed during and after the collision of Turan plate with Iran plate before late Carnian (about 225 m.y. ago). It is located in the northeast of Iran and has a WNW to ESE trend. Neyzar Formation is composed of siliciclastic sediments and sandy shale and sandy limestone. This unit is widespread in the east and northeast parts of the basin. To determine the stratigraphy, microfossils, microfacies and depositional environment of Neyzar Formation, three stratigraphic sections were selected and measurement and detailed sampling carried out on each of them. These sections from east to west are as fallows : 1) Tang-e Neyzar (Neyzar gorge) section 2) Tang-e Chahchaheh section 3) Jalil abad section In the previous studies, the base and top boundaries of Neyzar Formation with Abtalkh and Kalat Formations were reported conformable and transitional (Afshar Harb, 1373). However, according to present investigations in eastern regions, lower boundary of Neyzar Formation with Abtalkh Formation in sections 1 and 2 are disconformable (as a Paleosol). This boundary in the section 3 is conformable and transitional. The upper boundary of Neyzar Formation with Kalat Formation in 1, 2 and 3 sections are disconformable (as a paleosoil). Two types of facies were identified based on micropaleontologic and petrographic studies: 1) Siliciclastic facies, 2) Carbonate facies. Based on microfacies studies it seems that the siliciclastic parts of Neyzar Formation was deposited in a lagoonal-barrier island environments and the carbonaceous parts in a shallow carbonate platform (ramp type). In most of the published reports and articles Neyzar Formation was introduced as low fossil bearing unit with no index–fossil. The age of this formation was determined only by the basis of its stratigraphical situation, but in the present investigation, in addition, 41 genera and 30 species of microfossils have been identified for the first time from index fossils such as: Orbitoides apiculata, Orbitoides tissoti, Lepidorbitoides sp., Siderolites calcitrapoides, Pseudosiderolites vidali, Abathomphalus mayaroensis. These fossil assemblages suggest the Maastrichtian, especially Late Maastrichtian age for Neyzar Formation.
حوضه رسوبی کپه داغ، پس از بسته شدن اقیانوس دیرینهتتیس، در اقیانوس نوتتیس، در جنوب صفحه توران تشکیل شد. در این حوضه، توالی رسوبی ستبری از ژوراسیک تا میوسن بدون هیچ گونه وقفه رسوبی مهم نهشته شده است. سازند سیلیسی- آواری کشف رود با سن ژوراسیک میانی، حدود 2 کیلومتر ستبرا دارد و به طور ناپیوسته بر روی سنگهای رسوبی تریاس و سنگهای اولترابازی نهشته شده و از رخسارههای رودخانهای- دلتایی و توربیدیتی، شامل ماسهسنگ، شیل و کنگلومرا، تشکیل شده است. این لایهها حاوی ایکنوفسیلهای زیادی مربوط به محیطهای مختلف هستند. در رخسارههای ماسهسنگی و شیلی این سازند، ایکنوفسیلهای متعددی همانند:Skolithos, Palaeophycus tabularizes,Belerhaphe, Thalassinoides suevicus, Psilonichnus , Planololites beverleyensis, Rhizocoralium jenese, Scolicia, Conichnus, Lophactenium, Palaeophycus striatus,Taenidium شناسایی شده است، که بر اساس این آثار فسیلی و رخسارههای در برگیرنده آنها، میتوان محیط تهنشینی سازند کشف رود را محیط رودخانهای - دلتایی تا نسبتاً ژرف(شرایط آشفته(توربیدیتی)) تفسیر کرد. این اطلاعات میتواند در تفسیر تاریخچه جغرافیای دیرینه و زمینساختی منطقه (در ژوراسیک میانی) کمک کند.
The KopetDaghBasin of northeast Iran formed in the NeotethysOcean after the closure of Paleotethys in the south of Turan plate. A thick sequence of Jurassic to Miocene sediments has been deposited in this basin without any major break. The siliciclastic Kashafrud Formation (Middle Jurassic), overlying unconformably on Triassic rocks and ultrabasic rocks comprises nearly 2 km of turbidite and fluvio-deltaic facies, consists of sandstone, shale and conglomerate. Trace-fossil assemblages are presented in some units with different environments. The most important ichnofossils in this formation are Skolithos, Palaeophycus tabularizes,Belerhaphe, Thalassinoides suevicus, Psilonichnus , Planololites beverleyensis, Rhizocoralium jenese, Scolicia, Conichnus, Lophactenium, Palaeophycus striatus,Taenidium. It is interpreted, based on identified ichnofossils, the Kashafrud Formation may have been deposited in fluvio-deltaic and deep water (turbidity conditions) environment. We hope that these data can help in a better understanding of palaeogeography and tectonic setting of the region during Middle Jurassic.
در این مقاله، انواع مدلهای ریاضی دوبعدی و سه بعدی به منظور تصحیح هندسی تصاویر SAR در هندسه Slant range استفاده شده است. تعدادی از این مدلها، هندسه تصویر را در لحظه تصویربرداری در نظر میگیرند، در حالی که دیگر مدلها، فضای تصویررا به کمک یک چند جملهای با فضای زمین مرتبط میسازند. تصاویر مورد آزمایش، سه تصویر ENVISAT از منطقه بم است. برای تصحیح نقاط کنترل دو بعدی از نقشه توپوگرافی با مقیاس 1:25000 و ارتفاع آنها از SRTM استخراج شدند. مدلهای استفاده شده در روش دو بعدی انواع چندجملهایها، point wise، piece wise و projective بوده در حالی که برای تصحیح هندسی سه بعدی مدل پیچیده SAR به کارگرفته و نتایج آن با روش DLT مقایسه شد. از آنجا که این تصاویر به منظور مطالعات تداخل سنجی تهیه شدهاند، خط مبنای آنها کوچک بوده و در نتیجه دقت استخراج مختصات سه بعدی به کمک زوج تصویر آنها پایین است. در حالی که نتایج تصحیح هندسی دو بعدی از دقت نسبتاً خوبی برخورداراست
study several 2D and 3D math models have been tested in order to correct slant range SAR data geometrically. Some of these models consider the imaging geometry at the time of imaging while the others relate the ground space to the image one by mathematical polynomials. The images used here are 3 ENVISAT ones of Bam area. In order to extract the 3D GCPs, a topographic map with a scale of 1:25000 and SRTM DEM were used. The 2D math models used in this study include Global polynomial, Point wise, Piece wise and Projective while the 3D models are DLT and Rigorous SAR model. Since the images used in this study were originally ordered for interferometry studies, their baseline is so small that the precision of 3D coordinates extraction is not satisfactory enough. However, the results of 2D models are much better.