@article { author = {}, title = {سخن سردبیر}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {1-1}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {}, abstract = {سخن سردبیر}, keywords = {سخن سردبیر}, title_fa = {سخن سردبیر}, abstract_fa = {سخن سردبیر}, keywords_fa = {سخن سردبیر}, url = {http://www.gsjournal.ir/article_54431.html}, eprint = {http://www.gsjournal.ir/article_54431_69a1d69118c4f5b56163b8df34ae06d1.pdf} } @article { author = {Babazadeh, N. and Mansourian, A. and Zareinejad, M. and Farnaghi, M.}, title = {Using Spatial Enabled E-Government to Improve the Process of Issuing Industrial and Mineral licenses: A Case Study for Cement Factory Establishment, Respecting Environment Constrains}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {3-10}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54432}, abstract = {The current process of issuing industrial and mineral licenses is complex and time consuming. More specific, industry establishment generally makes environmental pollution. Such negative impact on environment is due to not using proper information and mechanisms for site selection and license issuance. This research suggests a new process/method based on WebGIS enable e-government to simplify the issuance of industrial licenses, with special consideration of environmental impacts. To study, issuance of license for cement factory establishment is chosen as a case study. Investigation of the current process of certificating a cement factory establishment shows necessity of complex official process and long time consumption; also environmental considerations are not regarded properly. Then using concepts and aims of e-government and the abilities of geographical information systems in analyzing and spatial decision making, a new method to issue the industrial license is suggested. To show and evaluate the proposed method, architecture of a web based distributed geographical information system is designed and implemented. The results of the research indicate that the issuance of license for cement factory establishment using recommended method is performed in less time and with regarding the environment issues. The suggested process/method can be regarded as a pattern for creating spatial enabled e-government in industrial and mineral activities of the country.}, keywords = {Industrial Licenses,E-Government,WebGIS}, title_fa = {بهبود فرایند صدور مجوزهای معدنی و صنعتی بر پایه دولت الکترونیک مکان محور: نمونه مطالعاتی احداث کارخانه سیمان با رعایت ملاحظات زیست محیطی}, abstract_fa = {فرایند صدور مجوزهای صنعتی و معدنی، به شکل کنونی، پیچیده و زمان‌بر است. بویژه این که ایجاد صنایع، بیشتر با آلودگی­های زیست­محیطی همراه هستند و به‌دلیل استفاده نکردن از سازوکارها و اطلاعات مناسب، ملاحظات زیست‌محیطی به‌طور مناسب و شایسته رعایت نمی­شوند. این پژوهش، روش جدیدی را مبتنی بر سامانه‌های اطلاعات مکانی تحت وب در قالب دولت الکترونیک برای آسان کردن فرایند صدور مجوزهای صنعتی و معدنی با تأکید بر رعایت مسائل زیست محیطی ارائه می­کند. برای این منظور، صدور مجوز کارخانه سیمان به‌عنوان نمونه مطالعاتی انتخاب و در ابتدا فرایند فعلی صدور مجوز کارخانه سیمان بررسی شد که نشان‌دهنده لزوم طی کردن فرایندهای پیچیده اداری و صرف زمان بسیار طولانی (گاه تا دو سال) است؛ افزون براین مسایل زیست‎محیطی به خوبی رعایت نمی­شوند. سپس با بهره­گیری از مفاهیم و اهداف دولت الکترونیک و قابلیت‌های سامانه‌های اطلاعات مکانی در انجام تحلیل‌ها و تصمیم­گیری‌های مکانی، روشی جدید برای صدور مجوزهای صنعتی پیشنهاد شد. برای نمایش و ارزیابی روش پیشنهادی، یک سامانه اطلاعات مکانی توزیع‌شده تحت وب طراحی و پیاده­سازی شد. نتایج این پژوهش، گویای آن است که فرایند صدور مجوز کارخانه سیمان با روش پیشنهادی در زمانی بسیار کمتر و با رعایت ملاحظات زیست‎محیطی قابل انجام است. روش پیشنهادی می‌تواند به‎عنوان الگویی برای پیاده‎سازی دولت الکترونیک مکان محور در فعالیت‌های صنعتی و معدنی کشور مورد توجه قرار گیرد.}, keywords_fa = {مجوز صنعتی,دولت الکترونیک,سامانه اطلاعات جغرافیایی تحت وب}, url = {http://www.gsjournal.ir/article_54432.html}, eprint = {http://www.gsjournal.ir/article_54432_5c580d6a88adc6f6e5ae64896cfdb2fd.pdf} } @article { author = {Mohajjel, Mohammad and Rahami, Z. and Shabani, F.}, title = {Role of Detachment Surface in Local Thickening and Shear Folding,Shurab Syncline, Southeast Qom}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {11-16}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54434}, abstract = {Lower-red, Qom and Upper-red Formations with Pliocene conglomerates were all folded in Shurab syncline containing northwest-southeast axial trace in southeast Qom city. In the southeastern part of the northern limb of the Shurab syncline, gypsum and marl elastic units of the Qom Formation have played a detachment surface role against the most competent layers of the Upper-red Formation due to high competency contrast. Rock units of the Qom Formation were thickened and locally folded with about north-northeast orientation in the southeastern part of the northern limb of the Shurab syncline. The thickening and folding in this part of the Shurab syncline is interpreted as the shearing process which has been produced in a shear zone initiated between the detachment surface and the Qom fault segment in the northern part of the Shurab syncline that was activated by right-lateral strike-slip displacement of the Qom fault in post Miocene.}, keywords = {Qom fault,Shurab syncline,detachment surface,Thickening,Shear zone,Shear Folding}, title_fa = {بررسی اثر سطح جدایشی بر ستبرشدگی و چین‌خوردگی برشی محلی در ناودیس شوراب، جنوب خاور قم}, abstract_fa = {سازندهای سرخ زیرین، قم، سرخ بالایی و کنگلومرای پلیوسن در ساختار ناودیس شوراب (جنوب خاور شهر قم) با روند شمال‌باختر- جنوب‌خاور چین‌خورده‌اند. در این ناودیس لایه‌های شکل‌پذیر مارنی و گچی عضوهای بالایی سازند قم در همبری با لایه‌های پرقوام کنگلومرا و ماسه سنگ از سازند سرخ بالایی قرار گرفته‌اند. در یال شمالی ناودیس شوراب (بخش جنوب خاوری) در این همبری، به صورت محلی افزون بر افزایش ستبرای قابل توجه در نهشته‌های مارنی-گچی سازند قم، چین­هایی با روند عمود بر روند ناودیس شوراب فقط در یال شمالی ناودیس در سازند قم و سازند سرخ زیرین به وجود آمده در صورتی که این چین‌خوردگی محلی در یال جنوبی ناودیس شوراب تشکیل نشده است. به وجود آمدن چین‌خوردگی محلی در بخش جنوب‌خاوری یال شمالی ناودیس شوراب نتیجه عملکرد جدایشی بخش مارنی-گچی به دلیل اختلاف رئولوژی زیاد، در مرز دو سازند قم و سرخ بالایی ارزیابی می‌شود. بررسی ساختار به‌وجود آمده روشن ساخت که تشکیل چین‌های با راستای شمال- شمال‌خاور- جنوب- جنوب‌باختر، در انتهای جنوب خاوری در یال شمالی ناودیس شوراب نتیجه به‌وجود آمدن پهنه برشی امتداد لغز راست بر میان سطح جدایشی و گسل قم است که به‌موازات آن در شمال ناودیس شوراب قرار دارد و این پهنه برشی در اثر حرکت راستالغز راست‌بر گسل قم در زمانی پس از میوسن فعال شده است.}, keywords_fa = {گسل قم,ناودیس شوراب,سطح جدایشی,ستبر شدگی,پهنه برشی,چین‌خوردگی برشی}, url = {http://www.gsjournal.ir/article_54434.html}, eprint = {http://www.gsjournal.ir/article_54434_dedec7978074333448bac83a22b88075.pdf} } @article { author = {Farzamian, M. and Kamkar Rouhani, A. and Ziaiie, M. and Faraji Sabokbar, H. A. and Seif panahi, K.}, title = {Application of Fuzzy Logic Method in Integration of Lead and Zinc Exploration Data in GIS Environment for Mapping Potential Zones in Chichakloo Area, East of Takab}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {17-30}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54435}, abstract = {Chichakloo Lead and Zinc ore deposit is one of mineral potential areas, located in Lead and Zinc belt limit of Takab zone and 25 km far from Anguran mine. This ore deposit has been prospected and explored in different scales several times within the last few decades. The last exploration activity over the deposit is the detailed geophysical survey (using resistivity and induced polarization methods) and also geochemical survey for potential mapping of Lead and Zinc zones.  In this paper, after modeling and interpretation of geophysical data and processing and interpretation of geochemical data, we have prepared suitable exploration maps in GIS environment. For this, we have taken a new fuzzy approach for exploration maps using trapezoidal membership function. Then, for integration of exploration fuzzy layers, we have used fuzzy operations. The results of investigation of the final integrated exploration map indicate lead and zinc zones having a fuzzy favorability of greater than 0.5 in southeast of the study area that is obtained from remarkable overlapping of geophysical and geochemical anomalies. The results of drilling boreholes in the area confirm the exploration results obtained in this research work.}, keywords = {Lead and zinc Mineralization,Geographic information system,Resistivity,Induced Polarization,Geochemical Surveys,Fuzzy logic,Trapezoidal Membership Function,Fuzzy operations}, title_fa = {به کارگیری روش منطق فازی در تلفیق داده‌های اندیس سرب و روی محدوده اکتشافی چیچکلو (خاور تکاب) به منظور تعیین نقاط پتانسیل دار در محیط GIS}, abstract_fa = {کانسار سرب و روی چیچکلو یکی از مناطق پتانسیل‌دار است که در محدوده کمربند سرب و روی پهنه تکاب و در  25 کیلومتری شمال باختر معدن انگوران قرار گرفته است. کانسار یادشده در طی چندین دهه گذشته به دفعات مورد مطالعات پی‌جویی و اکتشاف در مقیاس‌های مختلف قرار گرفته و آخرین فعالیت‌های اکتشافی، برداشت‌های تفصیلی ژئوفیزیکی (به‌روش مقاومت ویژه و قطبش القایی) و ژئوشیمیایی به‌منظور پتانسیل‌یابی کانسار سرب و روی در این منطقه بوده است. در این پژوهش، پس از مدل‌سازی و تفسیر داده‌های ژئوفیزیکی و پردازش و تفسیر داده‌های ژئوشیمیایی، نقشه‌های اکتشافی در محیط GIS آماده سازی شدند. در ادامه، با به‌کارگیری توابع عضویت ذوزنقه‌ای که متناسب با ماهیت اکتشافی است، نقشه‌های اکتشافی فازی‌سازی شده و در واقع روش فازی‌سازی نوینی برای ‌فازی‌سازی نقشه‌های یادشده مورد توجه قرار گرفته است. در پایان برای تلفیق نقشه‌های فازی اکتشافی از عملگرهای فازی استفاده شده است. نتایج بررسی نقشه نهایی اکتشافی به‌منظور اکتشاف ماده معدنی سرب و روی در منطقه یادشده گسترش بی‌هنجاری‌های اکتشافی با مطلوبیت فازی بیش از 5/0 را در جنوب خاوری منطقه مطالعاتی نشان می‌دهد که حاصل همپوشانی قابل توجه بی‌هنجاری‌های ژئوفیزیکی و ژئوشیمیایی در این منطقه است. حفاری‌های انجام شده در منطقه درستی نتایج اکتشافی به دست آمده در این پژوهش را مورد تأیید قرار می‌دهد.}, keywords_fa = {کانی‌سازی سرب و روی,سیستم‌های اطلاعات جغرافیایی,مقاومت ویژه,قطبش القایی,برداشت‌های ژئوشیمیایی,منطق‌فازی,تابع عضویت ذوزنقه‌ای,عملگرهای فازی}, url = {http://www.gsjournal.ir/article_54435.html}, eprint = {http://www.gsjournal.ir/article_54435_58ca70dbd17a48369757abb48eca5bb3.pdf} } @article { author = {Asadi Mehmandosti, E. and Alizadeh, B. and Adabi, M. H.}, title = {Geochemical Evaluation of Source Rocks and Crude Oils of Marun Oil Field with Rock-Eval Pyrolysis (VI) and Gas Chromatography Instruments}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {31-38}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54436}, abstract = {Marun Oilfield is one of the main Iranian Oilfield in Dezful Embayment, Zagros area which was studied geochemically in this paper. Forty three samples from different source and reservoir rocks include Garue, Gadvan, Dariyan, Kazhdumi, Sarvak, Gurpi and Pabdeh formations from different oil wells were analyzed by Rock Eval VI. In addition, 23 selected extract bitumens and 6 crude oils of Bangestan and Khami reservoirs were studied by Liquid Chromatography and Gas Chromatography to compare with each other. Rock Eval data showed that Kazhdumi and Pabdeh formations with average TOC of 4.13 wt% and more than 12 mg HC/g rock amount of S2 had high hydrocarbon potential regard to other samples. HI vs. Tmax and S2 vs. TOC diagrams indicated that the Type II kerogen was the main type of kerogen in studied samples. Furthermore, Garue, Gadvan and Kazhdumi samples have high thermal maturity in compare with other samples. Also, variations of PI and Tmax versus depth indicate that Pabdeh and Gurpi samples had less thermal maturity in compare with Kazhdumi and Garue samples. Chromatograms study and variation of Pr/nC17 and Ph/nC18 indicate that studied samples have no or little evidence of biodegradation and crude oils of Bangestane and Khami reservoirs was formed in anoxic environment from the source rock with type II kerogen.  }, keywords = {Rock Eval VI,Gas Chromatography,Bangestan Reservoir,Khami Reservoir,Marun Oilfield}, title_fa = {ارزیابی ژئوشیمیایی سنگ‎های منشأ و نفت‎های خام میدان نفتی مارون با استفاده از دستگاه پیرولیز راک‎ایول (6) و کروماتوگرافی گازی (GC)}, abstract_fa = {میدان نفتی مارون، یکی از مهم‎ترین میادین نفتی ایران در جنوب فروافتادگی دزفول شمالی در کمربند چین‎خورده زاگرس است که مورد بررسی ژئوشیمی آلی قرار گرفته است.  43  نمونه از سازندهای مخزن و منشأ گرو، گدوان، داریان، کژدمی، سروک، گورپی و پابده از چاه‎های متفاوت میدان نفتی مارون توسط پیرولیز راک‎ایول تجزیه  و بیتومن استخراج ‎شده از 23 نمونه انتخاب شده با دستگاه کروماتوگرافی ستونی و گازی مورد مطالعه قرار گرفت. به منظور مقایسه بیتومن استخراج‎شده از سازندهای مورد بررسی، 5 نمونه نفت خام از مخزن بنگستان و یک نمونه از مخزن خامی مطالعه شده است. بررسی داده‎های حاصل از پیرولیز راک‎ایول نشان می‎دهد که نمونه‎های کژدمی و پابده با میانگین کل کربن آلی 13/4 درصد و S2 بیشتر از 12 میلی‎گرم هیدروکربن بر گرم سنگ دارای بیشترین مقدار درصد TOC و پتانسیل هیدروکربن‎زایی بالاتری نسبت به دیگر نمونه‎ها هستند. بر مبنای نمودار HI در برابر Tmax و همچنین S2-TOC مشخص شد که کروژن موجود در سازندهای مورد مطالعه از نوع II است. همچنین سازندهای گرو، گدوان و کژدمی با رسیدن به مرحله کاتاژنز مسیر بلوغ حرارتی را طی کرده‎اند. تغییرات PI و Tmax در برابر ژرفا بیانگر این موضوع است که نمونه‎های پابده و گورپی بلوغ کمتری را نسبت به نمونه‎های کژدمی و گرو نشان می‎دهند. مطالعه کروماتوگرام‌ها و نسبت تغییرات مقادیر Pr/nC17 در برابر Ph/nC18 نشان می‎دهد که نمونه‎های مورد مطالعه فاقد یا دارای مقدار کمی پدیده تخریب زیستی بوده و نفت خام مخزن بنگستان و خامی از سنگ منشأیی با کروژن نوع II در شرایط کاهیده تشکیل شده است.}, keywords_fa = {راک‎ایول 6,کروماتوگرافی گازی,مخزن بنگستان,مخزن خامی,میدان نفتی مارون}, url = {http://www.gsjournal.ir/article_54436.html}, eprint = {http://www.gsjournal.ir/article_54436_334592357145adf23899f2104c2b45d7.pdf} } @article { author = {Seyed Emami, K. and Behfar, N. and Majidifard, M. R. and Behfar, A.}, title = {Lithostratigraphy and Biostratigraphy of the Dalichai Formation at Talu (Northeast Damghan, Alborz) based on Ammonoids}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {39-52}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54439}, abstract = {Middle Jurassic strata are well developed northeast of Damghan (E Alborz). At the study section the Dalichai Formation has a maximum thickness of 156 m, consisting of an alternation of bluish-grey limestones and marls, being subdivided into 4 members. The lower boundary with the siliciclastics of the underlying Shemshak Formation is unconformity, due to the Mid-Cimmerian tectonic event, whereas the upper boundary with the light and cliff-forming carbonates of the Lar Formation is gradational. The Dalichai Formation at the study section is very fossiliferous. Summing up 1750 fossil specimens were collected, among which the ammonoids with 1491 specimens clearly predominate. Altogether 27 genera, 33 species of ammonites, belonging to 6 biozones (Parkinsoni Zone, Zigzag-Aurigerus zones, Subcontractus Zone, Bullatus-Gracilis zones, Anceps-Coronatum zones, Athleta Zone) has been recognized. In addition 17 genera and 8 species of planktonic and benthic foraminifers are described.These can be divided into 2 biozones. The fossil-content is mainly concentrated within few meters of red and nodular limestone in the upper part of the section. Based on the ammonite fauna the age of the Dalichai Formation in the investigated area ranges from Upper Bajocian to Oxfordian. Paleobigeographically the fauna shows close relationship to western Europe and Sub-Mediterranean region. This indicates a paleogeographic position of the area at the northern Tethys during the Middle-Upper Jurassic.}, keywords = {Dalichai Formation,Lithostratigraphy,Biostratigraphy,Environment,Middle Jurassic,Ammonite,Eastern Alborz,Iran}, title_fa = {سنگ‌چینه‌شناسی و زیست‌چینه‌شناسی سازند دلیچای در برش طالو، شمال‌خاوری دامغان با توجه ویژه به آمونوییدا}, abstract_fa = {ردیف‌های مناسبی از سنگ‌های ژوراسیک میانی - بالایی در شمال‌خاوری دامغان (محدوده ساختاری البرز خاوری) رخنمون دارد. سازند دلیچای در منطقه مورد بررسی، در مجموع از تناوب مارن و سنگ‌آهک مارنی به رنگ خاکستری متمایل به سبز تشکیل شده است. چینه‌شناسی این سازند با 156 متر ستبرا در برش طالو مورد بررسی قرار گرفته و در 4 بخش تقسیم و توصیف شده است. سازند دلیچای در برش مورد بررسی، در مرز زیرین خود به‌طور ناهمساز بر روی سازند شمشک قرار دارد و در مرز بالایی به‌طور هم‌شیب و گذر تدریجی توسط سنگ‌آهک‌های ستبر‌لایه سازند لار پوشیده می‌شود. از برش مورد بررسی، در مجموع 1750 نمونه فسیلی جمع‌آوری شد که 1491 نمونه آمونیتی و 259 نمونه از تاکسون‌های جانوری دیگر (بلمنیت، شکم پایان، دوکفه‌ای‌ها، بازوپایان، خارپوستان و اسفنج) بوده است. با بررسی‌های انجام شده، 27 جنس، 33 گونه، 6 زیست زون آمونیتی (Parkinsoni Zone, Zigzag-Aurigerus zones, Subcontractus Zone, Bullatus-Gracilis zones, Anceps-Coronatum zones, Athleta Zone) ،  17 جنس،  8 گونه و 2 زیست زون از روزن داران بنتیک و پلاژیک شناسایی و معرفی شد. محتوای فسیلی به‌طور عمده در متراژ کمی از سنگ‌آهک‌های سرخ رنگ ندولار، در بخش بالایی برش متمرکز شده است. بر اساس مجموعه فسیلی شناسایی شده، برای سازند دلیچای در منطقه شمال خاوری دامغان سن باژوسین پسین - آکسفوردین را می‌توان در نظر گرفت. زیای آمونیتی ژوراسیک میانی- بالایی شمال‌خاوری دامغان به‌طور عمده ارتباط نزدیکی را با زیای آمونیتی اروپای شمال‌باختری و مناطق حاشیه‌ای مدیترانه نشان می‌دهند.  }, keywords_fa = {سازند دلیچای,سنگ‌چینه‌شناسی,زیست‌چینه‌شناسی,محیط رسوبگذاری,ژوراسیک میانی,آمونیت,البرز خاوری,ایران}, url = {http://www.gsjournal.ir/article_54439.html}, eprint = {http://www.gsjournal.ir/article_54439_45e69bca7aa0bae813cdaa757329bcbe.pdf} } @article { author = {Yassaghi, A. and Narimani, H. and Hasan goodarzi, M. Gh.}, title = {Structural Analysis of Dowgonbadan Region, Zagros Fold Thrust Belt, An Instance of Frontal and Lateral Ramp}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {53-64}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54440}, abstract = {Structures in fold-thrust belts such as Zagros which are developing mainly along the belt strike often terminate at the transverse structures. The Zagros Mountain Front Fault has cut and displace at different parts by transverse structures. At Dowgonbadan area this fault is intersected by the Kharg-Mish transverse structure. The Mish anticline has transported fault propagation geometry and located on hanging wall of the Mountain front fault. The anticline plunges and rotates when it reaches to the Kharg-Mish transverse fault to the west. In the fault footwall, however, the Dil, Pahn, Sarab and Jafarabad anticlines have rounded geometry and low amplitude show characteristics of the Dezful Embayment zone folds. The Dil and Pahn anticlines with bifurcate geometry and outcrop of Asmari Formation develop parallel to the frontal ramp strike and show footwall anticlines that propagated from the frontal ramp at Dashtak formation as delay structures with respect to the hanging wall structures. The Kharg-Mish fault identify as a lateral ramp on the surface by termination of longitudinal structures and at the depth with thickness and facies changes of the Ilam Formation. The structural characteristics of the Dowghonbadan area in the Zagros Fold-Thrust Belt are analyzed as the interaction of the Mountain Front fault and the Kharg-Mish transverse fault as the frontal and lateral ramps, respectively. }, keywords = {Zagros fold-thrust belt,Transverse Fault Zone,Frontal and Lateral Ramps,Mountain Front Fault,Dowgonbadan Area}, title_fa = {تحلیل ساختاری ناحیه دوگنبدان؛ زاگرس چین‌- رانده، شاهدی بر شیب‌راهه پیشانی و جانبی}, abstract_fa = {امتداد ساختارهای کمربندهای چین­- رانده در طول، گسترش محدودی دارند و بیشتر به ساختارهای عرضی پایان می­یابند. در کمربند چین­- رانده زاگرس، راستای گسل پیشانی کوهستان در بخش­های مختلف توسط ساختارهای عرضی بریده و جابه‎جا شده است. در ناحیه دوگنبدان این گسل در تقاطع با ساختار عرضی گسل خارگ-میش است. تاقدیس میش در فرادیواره گسل پیشانی کوهستان با هندسه جعبه­ای و از نوع چین گسترش گسلی حمل شده دارای کوژ به سوی پیش­بوم است و در پهلوی پیشانی برگشته است. ادامه این چین با رسیدن به ساختار عرضی گسل خارگ- میش کمی چرخیده و پایان می­یابد. در فرودیواره گسل پیشانی کوهستان تاقدیس­های دیل، پهن، سراب و جعفرآباد با هندسه گرد شده و دامنه کم نشان‌دهنده چین‌های فروافتادگی دزفول هستند. تاقدیس­های دیل و پهن با هندسه جدایشی دوشاخه با رخنمون عمومی از سازند آسماری، در اثر انتشار جانبی به موازات امتداد شیب‌راهه پیشانی از سطح جدایش سازند دشتک در فرودیواره گسل پیشانی کوهستان گسترش یافته­اند و نشان‌دهنده تاقدیس­هایی هستند که از سازند دشتک در فرودیواره­ به‌صورت تأخیری نسبت به ساختارهای فرادیواره در سطح ظاهر شده­اند. گسل خارگ- میش به‌عنوان شیب‌راهه جانبی در سطح با پایان یافتن ساختارهای طولی به آن و در ژرفا با توجه به تغییرات ستبرا و رخساره رسوبی قابل شناسایی است که بیشتر فعالیت آن در زمان رسوبگذاری سازند ایلام است. این هندسه ساختاری بیانگر اندرکنش گسل­های به‌ترتیب طولی پیشانی کوهستان و عرضی   خارگ- میش به صورت شیب‌راهه­های پیشانی و جانبی در هندسه و سبک ساختاری کمربند چین- رانده زاگرس در ناحیه دو گنبدان است.  }, keywords_fa = {کمربند چین - رانده زاگرس,پهنه گسلی عرضی- برشی,شیب‌راهه های پیشانی و جانبی,گسل پیشانی کوهستان,ناحیه دوگنبدان}, url = {http://www.gsjournal.ir/article_54440.html}, eprint = {http://www.gsjournal.ir/article_54440_1a642d493fa46e3601e87786cb25da82.pdf} } @article { author = {Monsef, I. and Rahgoshay, M. and Emami, M. H.}, title = {Geochemistry and Petrogenesis of the Orzuieh Volcanic Sequence (South of Iran)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {65-76}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54442}, abstract = {The Late Jurassic to Early Cretaceous Orzuieh volcanic sequence is exposed in the southern part of the Sanandaj – Sirjan Zone. Major and trace element geochemistry shows magma evolution from the transitional to the calc-alkaline series. Clinopyroxene compositions are similar to their composition in subduction setting and support a volcanic arc related environment. REE and trace element diagrams show enrichment patterns in LREE relative to HREE and depletion in Nb and Ta elements. This magmatic sequence has been originated from the mantle source with effect of liquids and sediment resulted from the subducting slab. The Orzuieh volcanic sequence is probably originated during the subduction of the Neo-Tethyan Oceanic lithosphere under the Sanandaj – Sirjan Zone, during the Late Jurassic to Early Cretaceous time, in the volcanic arc tectonic environment.}, keywords = {Volcanic rocks,Volcanic arc,Neo-Tethys,Sanandaj – Sirjan Zone,Orzuieh,South Iran}, title_fa = {ژئوشیمی و پتروژنز توالی آتشفشانی منطقه ارزوییه (جنوب ایران)}, abstract_fa = {توالی آتشفشانی منطقه ارزوییه با سن ژوراسیک بالایی- کرتاسه زیرین در پهنه ساختاری سنندج-  سیرجان جنوبی قرار گرفته است. ژئوشیمی عناصر اصلی و کمیاب، تحولات ماگمایی را از گرایش تحولی به سمت کلسیمی- قلیایی نشان می‌دهند. ترکیب شیمیایی کلینوپیروکسن‌ها مشابه با ترکیب این کانی در مناطق فرورانش است و از یک ناحیه مرتبط با کمان آتشفشانی منشأ گرفته است. نمودارهای عناصر کمیاب و خاکی  کمیاب الگوهای غنی‌شدگی را در  LREEها نسبت به HREEها و تهی‌شدگی را در عناصر Nb  و Ta نشان می‌دهند. این توالی ماگمایی از یک منشأ گوشته‌ای با تأثیر سیال‌ها و رسوبات حاصل از ورقه فرورانش تشکیل یافته است. توالی آتشفشانی منطقه ارزوییه احتمالا" در نتیجه فرورانش سنگ‌کره اقیانوس نئوتتیس به زیر پهنه سنندج- سیرجان، از زمان ژوراسیک بالایی تا کرتاسه زیرین، در محیط کمان آتشفشانی تشکیل یافته‌اند.  }, keywords_fa = {سنگ‌های آتشفشانی,کمان آتشفشانی,نئوتتیس,پهنه سنندج- سیرجان,ارزوییه,جنوب ایران}, url = {http://www.gsjournal.ir/article_54442.html}, eprint = {http://www.gsjournal.ir/article_54442_8d3858d837a345236da523c6ce5489e6.pdf} } @article { author = {Rahimsouri, Y. and Yaghubpur, A. and Modabberi, S.}, title = {Hydrogeochemistry and Water Quality of Springs and Drinking Waters of Villages in Aq-Darreh River Watershed, NW Takab, West Azarbaijan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {77-82}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54443}, abstract = {The results of physicochemical parameters (pH, Eh, EC, TDS, TH, TA, T, and Salinity) and chemical analyses of the springs and drinking water samples of the study area indicate obvious variation compared to each other. Based on these results, the minimum pH and maximum of TDS, EC, salinity, total hardness(TH), total alkalinity(TA) parameters and cations and anions, major and trace elements (especially As and Sb) concentrations in spring water samples belong to spring Aq.D1-1(located downstream of Aq-Darreh Bala abandoned antimony mine) and spring Sp.5 (downstream of tailing dams of Aq-Darreh Au mineral processing unit) samples, and the drinking water samples of the Aq-Darreh Paeen village ( spring D.W.P). The Aq-Darreh Paeen drinking water, supplied from the spring near the village, outpoured from the mineralized travertine. Compare to the international standards, main cations and anions concentrations and physicochemical parameters values (exception total hardness) of the springs and drinking water samples are located in permissible ranges. While, Aq-D1-1, Sp.5 and W.D.P springs water samples are polluted regarding to total hardness value and As concentration. Based on the geological map of the study area and location of the all spring water samples (except spring Sp.5), it can be concluded that the chemical composition of the bed rocks around the springs had the main role in controlling the water quality, and the main cause of Sp.5 water spring contamination is polluted waters leaked from the tailing dams of Aq-Darreh Au mineral processing unit. }, keywords = {Drinking Water Quality,Arsenic and Antimony Water Pollution,Aq-Darreh River Watershed,Takab,West Azarbaijan Province}, title_fa = {هیدروژئوشیمی و بررسی کیفیت آب چشمه ها و آب های آشامیدنی روستاهای واقع در حوضه آبریز رودخانه آغ دره، شمال باختر تکاب، استان آذربایجان غربی}, abstract_fa = {مقایسه متغیرهای فیزیکوشیمیایی(pH، Eh،EC ،TDS ،TH ، TA، دما و شوری) اندازه­گیری شده و تجزیه­های شیمیایی نمونه­های آب چشمه­ها و آب‌های آشامیدنی روستاهای واقع در حوضه آبریز رودخانه آغ­دره در شمال‌باختری شهرستان تکاب تفاوت­های چشمگیری را نشان داده است. بر اساس این نتایج، در میان چشمه­های آب نمونه­برداری شده کمترین مقادیر pH و بیشترین مقادیر TDS، EC، شوری، سختی کل، قلیائیت کل، غلظت کاتیون­ها، آنیون­ها و عناصر بالقوه سمناک As وSb به چشمه­ واقع در پایین­دست معدن متروکه آنتیموان  آغ­دره بالا (چشمهAq.D1-1) و چشمه واقع در پایین­دست سدهای باطله واحد استحصال طلای آغ­دره (چشمه Aq.D5) تعلق دارد. غلظت کل As وSb در چشمهAq.D1-1 به‌ترتیب g/lμ 3753 و g/lμ 320 و در چشمه Aq.D5 به‌ترتیب g/lμ 162 و g/lμ 3 است. در میان نمونه­های آب­ آشامیدنی روستاهای محدوده مورد مطالعه بالاترین غلظت As0 به‌آب آشامیدنی روستای آغ­دره پایین با غلظت کل As g/lμ 29 و در مورد Sb به آب آشامیدنی روستای آغ­دره وسط با غلظت کل Sb g/lμ 5 تعلق دارد. بر اساس مقادیر مجاز اشاره شده در استانداردهای بین­المللی، غلظت کاتیون­ها و آنیون­های اصلی و مقادیر پارامترهای فیزیکوشیمیایی (به غیر از سختی کل) نمونه­های آب چشمه­ها و آب­های آشامیدنی روستاهای محدوده مورد مطالعه در دامنه مقادیر مجاز تعیین شده قرار دارند. با توجه به بررسی­های صورت گرفته مشخص شده است که آلودگی As وSb چشمه Aq.D1-1 منشأ زمین­زاد (geogenic) دارد و از شیل­های سیاه با غلظت بالایی از عناصرAs وSb ناشی شده است، در حالی که آلوده شدن آب چشمه Sp.5 منشأ انسان‌زاد (anthropogenic) دارد و از نشت پساب ذخیره شده در پشت سدهای باطله واحد استحصال طلای آغ­دره و نفوذ آن به‌آب چشمه­های پایین­دست ایجاد شده است.}, keywords_fa = {کیفیت آب آشامیدنی,آلودگی آرسنیک و آنتیموان آب,حوضه آبریز رودخانه آغ دره,تکاب,استان آذربایجان غربی}, url = {http://www.gsjournal.ir/article_54443.html}, eprint = {http://www.gsjournal.ir/article_54443_8efb70015c7bd4ae88289f39a599bc9a.pdf} } @article { author = {Tatar, Mohammad and Tatar, M. and Kaviani, A.}, title = {Crustal Structure of Iran from Joint Inversion of Receiver Function and Phase Velocity Dispersion of Rayleigh Waves}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {83-94}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54444}, abstract = {Crustal structure of the Iranian plateau which is located between two convergent Arabian and Eurasian plates is studied.  Teleseismic earthquakes recorded by broad band stations of Iranian National Seismic Network (INSN) are used to compute the receiver functions for each station. Rayleigh wave phase velocity dispersion curves were estimated employing two-station methods for all possible station pair of the above mentioned seismic network. A combined inversion of Rayleigh wave phase velocities and body wave receiver functions increases the uniqueness of the solution over separate inversions and also facilitates explicit parameterization of layer thickness in the model space. Our result indicates the crustal thickness differs from a minimum of 40 ±2 km in southeast of Iran, (ZHSF) to a maximum of 56 ±2km beneath the Sanandaj-Sirjan zone (SNGE). We observe a crustal thickness of 47 ±2km beneath the central Zagros (GHIR) to 52 ±2km below the eastern most of Zagros (BNDS), then to 47 ±2km beneath the northwestern part of the Zagros (SHGR). Crust of the Central Iran (KRBR) has a thickness of 48 ±2 km while the average Moho depth in southern parts of the Central Alborz (DAMV and THKV stations) is 54±2km. Our analysis shows a thinning of the crust to 43 ±2 km beneath the northwest of Iran (MAKO) and western part of the Caspian basin (GRMI). }, keywords = {Iran,Surface waves,receiver function,Joint inversion,Dispersion of phase velocity}, title_fa = {ساختار پوسته ایران براساس برگردان همزمان تابع انتقال گیرنده و اطلاعات پاشندگی سرعت فاز امواج ریلی}, abstract_fa = {ساختمان پوسته فلات ایران واقع میان دو صفحه همگرای عربی و اوراسیا به‌کمک برگردان هم‌زمان توابع گیرنده و منحنی پاشندگی سرعت فاز امواج ریلی مورد مطالعه قرار گرفت. زمین‌لرزه‌های دور ثبت شده توسط ایستگاه‌های باند پهن شبکه لرزه‌نگاری ملی ایران (INSN) برای محاسبه توابع گیرنده مورد استفاده قرار گرفتند. منحنی پاشندگی سرعت فاز امواج رایلی به روش دو ایستگاهی میان جفت ایستگاه‌های شبکه لرزه‌نگاری یاد شده، محاسبه و تعیین شد. برای به‌کمترین میزان رساندن خطای موجود در برآورد ساختار پوسته در صورت استفاده از روش تحلیل توابع گیرنده و یا برگردان منحنی سرعت فاز امواج رایلی به تنهایی، از روش بهینه برگردان هم‌زمان تابع انتقال گیرنده و منحنی پاشندگی امواج رایلی استفاده شد. نتایج پژوهش حاضر نشان می‌دهد که ستبرای پوسته در ایران از 2± 40 کیلومتر درجنوب خاور کشور )ایستگاه ZHSF) تا حداکثر 2±56 کیلومتر در زیر زون سنندج- سیرجان (SNGE) متغیر است. مطالعه جامع صورت گرفته نشان داد که ستبرای پوسته در بخش‌های مرکزی زاگرس  (GHIR)مشابه با کارهای پیشین انجام گرفته 2± 47 کیلومتر است در حالی که در انتهایی‌ترین  بخش خاوری آن BNDS))ستبرای به2± 52کیلومتر و در بخش باختری SHGR)) به  2± 47 کیلومتر می‌رسد. ژرفای ناپیوستگی موهو برای ایران مرکزی (KRBR) 2± 48 کیلومتر برآورد شد. این در حالی است که ژرفای این ناپیوستگی در بخش جنوبی زون البرز مرکزی DAMV , THKV))به حدود 2±54 کیلومتر می‌رسد. ژرفای  محاسبه شده برای موهو در شمال‌باختر ایران ((MAKU و باختر حوضه دریای خزر GRMI)) بر یک پوسته با ستبرای 2±43 کیلومتر دلالت دارد.  }, keywords_fa = {ایران,امواج سطحی,توابعگیرنده,برگردان هم‌زمان,پاشندگی سرعت فاز}, url = {http://www.gsjournal.ir/article_54444.html}, eprint = {http://www.gsjournal.ir/article_54444_4f489ddaa77594b078126d6209e4b426.pdf} } @article { author = {Ahmadi, V. and Zavarei, A. and Motaharian, A. and Munt, M.}, title = {Gastropods Identification of Asmari Formation in Shamsabad and Runiz Stratigraphic Sections in South- East of Shiraz (Fars Province)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {95-102}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54445}, abstract = {Three rock units have been identified in Shamsabad and Runiz stratigraphic sections of Asmari Formation in internal Fars region. Gastropods of Shamsabad and Runiz stratigraphic sections belong to four orders, Mesogastropoda, Neogastropoda, Architaenioglossa, Sorbeoconcha. Seven genuses and three subgenus have been recognized in lower and middle parts. In general, four genuses and one subgenus of gastropods in lower part indicating the age of Chatian, two genuses and two subgenus in middle part are indicating the age of Aquitanian and a genus in upper part indicating the age of middle Eocene (lower boundary of Asmari Formation) has been observed with foraminifers species that include Somalina stefunini, Rhapydionina urensis. the age of Asmari Formation gastropods in the studied region is alike with associated foraminifera biozones that include, Nummulites fichteli – Nummulites intermedius – Nummulites vascus assemblage – zone, indicating the age of Chatian and Austroterillina howchini – Peneroplis evolutus assemblage –zone, indicating the age of Aquitanian. Gastropods recognized in sections, are listed below: Olivella sp., Mitra sp., Ampullina sp., Ampullospira sp., Campanile sp., Strombus sp., Natica sp., Tortoliva sp., Lithoconus sp., Dendroconus sp. }, keywords = {Gastropods,Asmari Formation,Internal Fars,Shiraz,Biozone}, title_fa = {معرفی گاستروپودهای سازند آسماری در برش های چینه‌شناسی شمس‌آباد و رونیز در جنوب خاور شیراز (استان فارس)}, abstract_fa = {در مقاطع چینه‌شناسی شمس‌آباد و رونیز در ناحیه فارس داخلی از رسوبات سازند آسماری 3 واحد سنگ چینه‌ای شناسایی شده است. به طور کلی گاستروپود‌های مقاطع چینه‌شناسی شمس‌آباد و رونیز به چهار راسته Mesogastropoda, Neogastropoda, Architaenioglossa, Sorbeoconcha تعلق دارند. در بخش‌های زیرین و میانی آن 7 جنس و 3 زیر جنس از گاستروپودها تشخیص داده شده است که در مجموع 4 جنس و یک زیر جنس از گاستروپودها در بخش زیرین به سن چاتین، در بخش میانی 2 جنس و 2 زیر جنس به سن اکی‌تانین  و یک جنس در بخش بالایی سازند جهرم به سن ائوسن میانی (مرز زیرین سازند آسماری) که همراه با گونه‌های روز‌ن‌بران از جمله Orbitolites camplanatus, Somalina stefunini, Rhapydionina urensis دیده شده است. سن گاستروپودهای سازند آسماری در منطقه مورد مطالعه،  با زیست‌زون‌های  روز‌ن‌بران همراه با آنها که شامل  زیست‌زون Nummulites fichteli – Nummulites intermedius – Nummulites vascus assemblage – zone به سن چاتین و زیست‌زون  Austroterillina howchini – Peneroplis evolutus assemblage –zone  به سن اکی تانین است، یکسان است. گاستروپود‌های تشخیص دادهشده در مقاطع به ترتیب از قدیم به جدید عبارتند از:Olivella sp., Mitra sp., Ampullina sp., Ampullospira sp., Campanile sp., Strombus sp., Natica sp., Tortoliva sp., Lithoconus sp., Dendroconus sp.}, keywords_fa = {گاستروپودها,سازند آسماری,فارس داخلی,شیراز,زیست‌زون}, url = {http://www.gsjournal.ir/article_54445.html}, eprint = {http://www.gsjournal.ir/article_54445_551e5171abf758ebefbfb8c446515bb5.pdf} } @article { author = {Khalatbari Jafari, M. and Sepehr, H.}, title = {The Geology and Petrology of the Kahduiyeh Tectonized Ophiolite}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {103-112}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54446}, abstract = {The Kahduiyeh tectonized Ophiolite exposed at the extreme northern part of Dehshir-Baft Ophiolite belt in the southern margin of centeral Iran microcontinent, comprise of mantle peridotites and crustal sequence. The serpentinized peridotites have cpx- bearing harzhburgite and lherzholite compositions which cross cut by diabase isolated dikes. The plutonic part of crustal sequence consist isotropic gabbro, diabase sheeted dike complex, intruded by wherlitic intrusion, quartz diorite, pegmatite gabbro and plagiogranite-tronjemite. The volcanic sequence consist of the intercalation of the chert and radiolarite, pelagic limestone have the Upper Cretaceous micro faunas at base of sequence and hyaloclasic braccia, hyaloclastite, sheet flow, tuff and  pillow lave on top of the sequence. Study of chemical analysis indicating a supra-subduction origin and enrichments for REE, Rb, Ba and Th might be affecting of slab-derived fluids. It seem that Kahduiyeh tectonized Ophiolite display a consistent sequence of events during their formation and evolution, includes birth, youth and maturity stages which is a natural consequence of ophiolite formation in the Supra-subduction zones.}, keywords = {Ophiolite,Peridotite,Isotopic Gabbro,Crustal Sequence,Supra-Subduction}, title_fa = {زمین شناسی و سنگ‌شناسی افیولیت تکتونیزه کهدوئیه}, abstract_fa = {افیولیت تکتونیزه کهدوئیه رخنمون یافته در منتهی­الیه محدوده شمالی کمربند افیولیتی ده شیر- بافت، حاشیه جنوبی خرده قاره­ ایران مرکزی از پریدوتیت­های گوشته­ای و توالی پوسته‌ای تشکیل شده است. پریدوتیت­های سرپانتینیتی شده ترکیب هارزبورژیت کلینوپیروکسن­دار و لرزولیت دارند و توسط دایک­های دیابازی منفرد قطع شده­اند. توالی پوسته­ای درونی دربردارنده­ گابروهای تودهای و کمپلکس دایک­های ورقه­ای دیابازی ­است که توسط اینتروژن­های ورلیتی، کوارتزدیوریت، پگماتیت­گابرو و پلاژیوگرانیت- ترونجمیت قطع شده­ است. توالی آتشفشانی این مجموعه دارای میان‌لایه­هایی از چرت و رادیولاریت، سنگ‌آهک پلاژیک دارای ریزفسیل­های کرتاسه بالایی در قاعده و همچنین برش هیالوکلاستیک، هیالوکلاستیت، جریان صفحه­ای، توف و گدازه­ی بالشی در بالا است. بررسی تجزیه‌های شیمیایی دلالت بر منشأ سوپرا- سابداکشن دارد و غنی­شدگی از عناصرکمیاب سبک مانند Rb و Ba و Th بازتابی از تأثیر سیال‌های برگرفته از صفحه فرورونده است. به نظر می­رسد که افیولیت تکتونیزه کهدوئیه، مجموعه­ای متوالی از مراحل شامل تولد، جوانی و بلوغ را در جریان تکامل خود پشت سر گذاشته است که پیامد طبیعی تشکیل افیولیت در پهنه‌‌های سوپر اسابداکشن است.}, keywords_fa = {افیولیت,پریدوتیت,گابرو ایزوتروپ,توالی پوسته ای,سوپرا- سابداکشن}, url = {http://www.gsjournal.ir/article_54446.html}, eprint = {http://www.gsjournal.ir/article_54446_323eadda2efe61777868cc37d3d5f9f9.pdf} } @article { author = {Kiarostami, K. and Vaziri, S. H. and Noori, B. and Allahmadadi, S. and Vakilbaghmisheh, F.}, title = {Deliberation of Cenomanian- Coniacian Boundary based on Biostratigraphic and Lithostratigraphic Studies in Bahregansar Field, Presian Gulf}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {113-120}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54447}, abstract = {In order to investigate lithostratighraphical and biostratigraphical as well as determination of exact contact between the Sarvak and Ilam formations in oil well X-01 of Bahregansar field thin microscopic sections, final well reports and its illustrative diagram were studied. The Sarvak Formation with a thickness of 206 m overlies the black to dark-green marls of Kazhdomi Formation with a gradual contact. This formation can be divided into 2 members and consist mainly of dolomite and dolomitic limestone. The Ilam Formation is considered in a depth ranging from 2672 to 2678 m in the studied well based on studied section and is mainly formed of clay limestone and thin-bedded limestone. This formation is covered by Gurpi Formation with a gradual contact and has a disconformity contact with the Sarvak Formation. Moreover, the age of the Ilam Formation has been considered as Coniacian - Early Campanian which is formed of pelagic facies in the studied area. A number of 22 species belonging to 23 genera have been identified that 6 genera and 11 species belong to the Ilam Formation and 11 species of 17 genera belong to the Sarvak Formation. Considering the identified fauna in the Sarvak Formation, the three following biozones were identified conforming to biozones presented by Wind (1965):1-Nezzazata - Alveolinids Assemblage Zone # 25; 2-Rudist debris # 24; 3-"Oligostegina"facies # 26. Presented biozones and principle of super position indicate Cenomanian age for the Sarvak Formation that consist of pelagic and neretic facies. Moreover, the age of the Ilam Formation has been considered as Coniacian - Early Campanian which is formed of pelagic facies in the studied area.}, keywords = {Cenomanian,Coniacian,Sarvak& Ilam Formations,Bahregansar,Persian Gulf}, title_fa = {بررسی گذر سنومانین - کنیاسین بر پایه مطالعات سنگ‌چینه‌شناسی و زیست‌چینه‌شناسی در میدان نفتی بهرگانسر، خلیج فارس}, abstract_fa = {}, keywords_fa = {سنومانین,کنیاسین,سازند‌های سروک و ایلام,بهرگانسر,خلیج فارس}, url = {http://www.gsjournal.ir/article_54447.html}, eprint = {http://www.gsjournal.ir/article_54447_ca1c38d7906cd628b29b62b21c5112b1.pdf} } @article { author = {Kamali, A. and Moayyed, M. and Jahanbakhsh Ganjeh, M. and Pirooj, H. and Jokar, M. and Ameri, A.}, title = {Geotourism and Their Potential Assessment in Qaflankuh Area, Myaneh, NW Iran, Using Mathematical Target Model}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {121-132}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54448}, abstract = {The studied area is located at southeast of Myaneh, in east Azarbaijan province. The tourism industry, especially geotourism is a new approach for improving of coexistence of human and nature, in order to make economic benfites is nowadays very important for local development. By evaluation of natural potential of   areas   with direction, planning   and physical developments in the direction of tourisms industry and absorption of tourist   especially in national and international scale, can help to provide job opportunities.This study, by investigating a small sample of geotourism potential of the country, tries to help a new approach towards the natural resources of the country. Threfore in this study, for investigation and evaluation of geotourism potentials of the study area, the taget function and traversing the geomorphological and geological features are carried out. In the model, using advantage coefficient (dij), it is possible to allocate tourism potential preferential to different locations and announce the location with highest advantage coefficient as top tourism localities. This research is a case study for using advantage coefficient model for the Qaflankuh area in east Azarbaijan. This area has unique, intact historical and natural features that can attract tourists. The variety of rocks in the area (andesite, basalt, rhyolite, ignimberite, fissure dykes, agates, perlite, faults, agglomerates, volcanic breccias, and volcanic bomb) has provided spectacular sights for every geosciences and geography. Qaleh Dokhtar and Pol- Dokhtar are example of historical-cultural sites. The results of this study, introduces the study area as a scientific geopark and as a natural history museum.}, keywords = {Geoutorism,Iran,Qaflankuh,Qaleh- Dokhtar,Agate,Perlite}, title_fa = {زمین گردشگری و ارزیابی توان گردشگری منطقه قافلانکوه میانه، با استفاده از مدل ریاضی تابع هدف}, abstract_fa = {منطقه مورد مطالعه در جنوب خاور میانه، و در استان آذربایجان شرقی واقع شده است. صعنت گردشگری، بویژه زمین‌گردشگری به عنوان رویکرد جدیدی برای توسعه همزیستی انسان و طبیعت، به منظور بهره برداری اقتصادی، امروزه در توسعه مناطق، جایگاه چشمگیری یافته است. با تعیین ظرفیت­های طبیعی مناطق، جهت­گیری و برنامه­ریزی و توسعه فیزیکی در راستای صنعت گردشگری و جذب جهانگردان بویژه در زمینه ملی و فرا ملی، می­توان زمینه اشتغال را در سطح منطقه­ای گسترش داد. این پژوهش، با بررسی نمونه کوچکی از توان­های زمین‌گردشگری کشور و رویکرد نوین، به گسترش و بهبود فضاهای طبیعی در کشور کمک می­نماید. بدین منظور در پژوهش حاضر برای بررسی و ارزیابی توان‌های زمین گردشگری محدوده مطالعاتی از تابع هدف و همچنین از بررسی پیمایشی عوارض پیکرشناسی و زمین شناختی منطقه استفاده شده است. در این مدل با استفاده از ظریب امتیاز d i,j می­توان توان­های گردشگری را برای اولویت دادن به مکان­های گردشگری و گردشگری سنجید و مکان­هایی که بیشترین تابع هدف را دارند به عنوان بهترین مکان گردشگری معرفی نمود. این پژوهش نمونه موردی استفاده ­از تابع هدف برای ارزیابی توان­های طبیعی و جاذبه­های گردشگری قافلانکوه میانه، واقع در استان آذربایجان شرقی است. این منطقه دارای جاذبه­های تاریخی و طبیعی بکر و بی­نظیری است که می­تواند توجه هر طبیعت­گردی را به خود جلب نماید. سنگ‌های متنوع در منطقه (آندزیت­ها، بازالت­ها، ریولیت ، ایگنمبریت، فیشر دایک­ها، انواع عقیق‌ها، پرلیت، گسله­ها، آگلومرا، برش آتشفشانی، بمب آتشفشانی و...) مناظری دیدنی را برای هر پژوهشگری در زمینه جغرافیا و علوم زمین به وجود آورده است. از جاذبه‌های دیگر منطقه، بعد تاریخی- فرهنگی آن است که می­توان به قلعه­دختر و پل­دختر اشاره کرد. نتایج یاد شده این پژوهش، منطقه را به عنوان زمین پارکی علمی و همچنین یک موزه تاریخ طبیعی معرفی می­نماید.}, keywords_fa = {زمین گردشگری,ایران,قافلانکوه,قلعه دختر,عقیق,پرلیت}, url = {http://www.gsjournal.ir/article_54448.html}, eprint = {http://www.gsjournal.ir/article_54448_759bbd4537831b8a8367ab4c009665b3.pdf} } @article { author = {Amerian, Y. and Vosooghi, B.}, title = {Subsidence Monitoring in Mashhad and Neyshabour area based on Change of Curvature Analysis Method Using Displacement Field from GPS Observations}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {133-138}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54449}, abstract = {The methodology of geometrical modeling of the earth surface deformation [surface deformation tensor of the first kind (tensor of strain), linearized surface rotation tensor, and surface deformation tensor of the second kind (tensor of change of curvature)] is done using different kind of space geodetic data (VLBI, SLR, GPS, DORIS, Levelling). In this study the tensor of change of curvature and its invariants and the change of the mean and Gaussian curvature in the Lagrangian portrayal was computed using GPS observation to monitor the subsidence of Mashhad and Neyshabour area. For this purpose, coordinates and displacement rates (velocities) of Iranian Permanent GPS Network (Khorasan area) in Eurasian frame derived in 2007 were analyzed. The maximum value of the rate of mean and Gaussian curvature difference are  and respectively in study area. The patterns of numerical analysis confirm land subsidence induced by over explosion of ground water in study area}, keywords = {Deformation Analysis,Deformation Tensor of Second Kind,GPS Observations,subsidence}, title_fa = {کنترل فرونشست دشت مشهد و نیشابور بر مبنای روش تجزیه و تحلیل تغییر انحنابا استفاده از میدان جابه‌جایی حاصل از مشاهدات GPS}, abstract_fa = {مدل‌سازی هندسی تغییرشکل رویه زمین با استفاده از معیارهای متفاوتی مانند تنسور تغییر شکل نوع اول (تنسور تغییر متریک یا همان تنسور کرنش)، تنسور دوران خطی و تنسور تغییر شکل نوع دوم (تنسور تغییر انحنا) با منابع گوناگون اطلاعاتی (GPS, DORIS, SLR, VLBI, Levelling) انجام می‌شود. در این پژوهش تنسور تغییر انحنا و کمیت‌های ناوردای حاصل از آن، تغییر انحنای متوسط و تغییر انحنای گوس در نگرش لاگرانژی با استفاده از اطلاعات شبکه دائم GPS برای بررسی فرونشست دشت مشهد و نیشابور محاسبه شد. برای این منظور مختصات و بردار سرعت سال 2007 میلادی مربوط به‌شبکه دائم GPS ایران (منطقه خراسان) در چارچوب اوراسیا تجزیه و تحلیل شد. تغییر انحنای متوسط و گوس به‌ترتیب بیشترین مقدار  /myr20- 10 * 4 و /myr 14- 10 * 14  را در منطقه مورد مطالعه دارند. الگوهای حاصل از نتایج عددی، بیانگر روند تغییر شکل‌های ارتفاعی منطقه به‌دلیل برداشت بی‌رویه آب‌های زیرزمینی است.  }, keywords_fa = {تجزیه تغییر شکل,تنسور تغییر شکل نوع دوم,مشاهدات GPS,فرونشست}, url = {http://www.gsjournal.ir/article_54449.html}, eprint = {http://www.gsjournal.ir/article_54449_6e0c6c0e675c435b02228904136c6037.pdf} } @article { author = {Tale Fazel, E. and Mehrabi, B. and Khakzad, A. and Kianpour, R.}, title = {Stages and Mineralization Conditions of Dardvey Iron Skarn Based on Mineralogy and Fluid Inclusion Evidences, Sangan Area (Khorasan Razavi)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {139-150}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54450}, abstract = {Sangan iron ore deposit is located in 308 km southeast of Mashhad and eastern structural zone of Iran. Due to the high grade, low P-content and high reserve, Sangan is regarded as one of the major iron ore deposits in Iran. The important anomalies in Sangan consist of east, central and west anomalies that Dardvey deposit is a typical magnetite-rich skarn developed along the contact of Sarnowsar I-type granite Oligo-Miocene age with high magnesium carbonate of Upper Cretaceous, formed in central anomaly. Dardvey deposit comprises of exoskarn, endoskarn and ore zones. The endoskarn zone is limited while exoskarn is extensive zone and includes sub-zones of garnet skarn, garnet-pyroxene skarn and pyroxene skarn in intrusive body side and epidote skarn beyond the intrusive body. Field evidence, mineralogical and microthermometry studies show three zones including; 1) intrusion of granitoid bodies in ranges of 320 to 520°C and 1kb pressure, 2) skarn mineralization zone consists of prograde stage are developed within the temperature ranges from 310 to 490°C in average salinity of 33.6 (wt.% NaCl), in association with metasomatic mineralization during a retrograde stage, developed within temperature ranges from 190 to 310°C in average fluid salinity of 13.6 (wt.% NaCl) accompanied by magnetite ore and massive pyrite, chalcopyrite and pyrrhotite. The late mechanism, including quartz vein-type mineralization and barren veins occurrence, comprises of subhedral to anhedral pyrite, chalcopyrite and phologopite bearing veins that occurred in two substages from 360 to 440°C temperature and average salinity of 33.4 (wt.% NaCl) and from 235 to 320°C temperature and average salinity of 14.6 (wt.% NaCl) in the skarn zone and intrusive body. According to studies, it may be fluid mixing and ore fluid dilution mechanisms by implications of low-temperature and salinity meteoric water and also, chemical composition changes of ore fluid due to water-rock interaction was the possible mechanism for ore-metal deposition of magnetite in the skarn zones and formation of sulfide ore minerals in the hydrothermal quartz vein and veinlets in late stage of mineralization in the area.}, keywords = {Skarn mineralization,Fluid Inclusions,Iron,Sarnowsar granite,Sangan,Dardvey}, title_fa = {مراحل و شرایط کانی‌سازی اسکارن آهن دردوی بر اساس شواهد کانی‌شناسی و میانبارهای سیال، منطقه سنگان (خراسان رضوی)}, abstract_fa = {کانسار سنگ آهن سنگان در فاصله 308 کیلومتری جنوب خاوری مشهد در زون ساختاری خاور ایران قرار دارد. این کانسار به‌دلیل داشتن عیار و ذخیره بالای آهن و پایین بودن مقادیر فسفر و گوگرد از مهم‌ترین ذخایر آهن ایران به‌شمار می‌رود. مهم‌‌ترین بی‌هنجاری‌های سنگان شامل بی‌هنجاری‌های باختری، مرکزی و خاوری است که کانسار دردوی، نمونه‌ای شاخص از اسکارن‌های غنی از مگنتیت بوده و در محل همبری توده‌ نفوذی گرانیت سرنوسر (با ویژگی گرانیت‌های تیپ I به سن الیگومیوسن) و سنگ‌های کربناتی پر‌منیزیم (به سن کرتاسه پسین) در بی‌هنجاری مرکزی تشکیل شده است. زون‌های اسکارن در کانسار آهن دردوی متشکل از سه زیرپهنه برون‌اسکارن، درون‌اسکارن و کانسنگ آهن است که زیر‌پهنه درون‌اسکارن به‌صورت محدود و برون‌اسکارن بیشترین گسترش را دارد. بخش برون‌اسکارن متشکل از زیر‌پهنه‌گارنت اسکارن، گارنت-پیروکسن اسکارن و پیروکسن اسکارن است که در فاصله دورتر به اپیدوت اسکارن تبدیل می‌شود. شواهد صحرایی، کانی‌شناسی و میکروترمومتری(دماسنجی میکروسکوپی) میانبارهای سیال، حاکی از دو مرحله اسکارن‌زایی شامل: 1) نفوذ توده گرانیتی در دمای 320 تا C˚520 و فشار تقریبی 1 کیلوبار و 2) تشکیل زون اسکارنی ‌پیشرونده با دمای 310 تا C˚490 و شوری میانگین (wt.% NaCl) 6/33 به همراه تشکیل کانی‌های متاسوماتیک بدون آب و زون اسکارن پسرونده با دمای تقریبی 190 تا C˚310 و میانگیـــــــن شوری (wt.% NaCl) 3/13 به همراه کانه مگنتیت و کانی‌های سولفیدی پیریت توده‌ای، مارکاسیت و کالکوپیریت است. به‌دنبال آن فعالیت‌های تأخیری، موجب تشکیل رگه‌های کوارتز-کانه‌دار و عقیم متشکل از پیریت نیمه‌شکل‌دار تا بی‌شکل، کالکوپیریت و فلوگوپیت در منطقه شده که طی دو مرحله یکی با دمای 360 تا C˚440 و ‌میانگین شوری (wt.% NaCl) 4/33 و دیگری با دمای 235 تا C˚320و شوری میانگین (wt.% NaCl) 6/14 در سنگ میزبان اسکارن و توده نفوذی، تشکیل شده‌اند. بر اساس مطالعات، می‌توان گفت فرایندهای آمیختگی و رقیق‌شدگی سیال کانه‌ساز توسط آب‌های جوی با شوری و دمای پایین و نیز تغییرات شیمیایی ناشی از واکنش سیال کانه‌ساز با سنگ میزبان، از عوامل مؤثر در نهشت آهن در زون‌های اسکارنی به‌صورت مگنتیت و تشکیل کانه‌های سولفیدی در رگه و رگچه‌های کوارتز گرمابی در مراحل پایانی کانی‌سازی در منطقه است.}, keywords_fa = {کانی‌سازی اسکارن,میانبارهای سیال,آهن,گرانیت سرنوسر,سنگان,دردوی}, url = {http://www.gsjournal.ir/article_54450.html}, eprint = {http://www.gsjournal.ir/article_54450_9bfeb9e9cef60bd9923753e1b53ece1d.pdf} } @article { author = {Mousivand, F. and Rastad, E. and Emami, M. H. and Peter, J. M. and Solomon, M.}, title = {Bathurst-type Zn-Pb-Cu Volcanogenic Massive Sulfide Mineralization in the Chahgaz Area, South of Shahre Babak, South Sanandaj-Sirjan Zone}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {151-164}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54451}, abstract = {Zn-Pb-Cu mineralization in the Chahgaz area, located 60 km south of Shahre Babak, occurs within a Middle Jurassic metamorphosed bimodal volcano-sedimentary sequence in the South Sanandaj-Sirjan zone. Mineralization occurs associated with exhalites within units 1and 2 of the host sequence as numerous occurrences, and within unit 3 as Chahgaz deposit and some occurrences hosted by meta-rhyolitic tuff, meta-rhyolite, and meta-pelites, as predominantly stratiform, tabular and sheeted-like orebodies at specific stratigraphic horizons. Ore textures include massive, semi-massive, banded, laminated, disseminated and vein-veinlets. Ore minerals are predominantly pyrite, sphalerite, galena, chalcopyrite, tetrahedrite, arsenopyrite, and minor bornite and pyrrhotite, and gangue minerals include dominantly sericite, quartz, chlorite and barite. Wallrock alteration is dominated by sericitic and chloritic and minor carbonatic and silicic types. Altered host rocks have been foliated due to metamorphism and deformation, and  along with the associated ores have been folded and faulted and show cataclastic, triple junctions, pressure shadows, crenulations, and boudinage features. Based on geological, mineralogical, geochemical and alteration studies, it is inferred that Zn-Pb-Cu mineralization in the Chahgaz area has occurred as volcanogenic massive sulfide (VMS)-type in an arc rift basin, and has  subsequently been metamorphosed under greenschist facies conditions during the Late Cimmerian and Laramid orogenies and younger events. This mineralization, in comparison with similar deposits in the world, has the most similarities with those deposits of siliciclastic felsic-type in the Bathurst Mining Camp, Canada, and Iberian Pyrite Belt in Spain and Portugal; and  it is the first recognition of this type in Iran.  }, keywords = {Chahgaz,Massive sulfide,VMS,Bathurst,South Sanandaj-Sirjan}, title_fa = {کانه زایی سولفید توده ای آتشفشانزاد روی-سرب-مس نوع Bathurst در منطقه چاه گز، جنوب شهر بابک، پهنه سنندج- سیرجان جنوبی}, abstract_fa = {کانه­زایی روی- سرب- مس در منطقه چاه­گز در 60 کیلومتری جنوب  شهربابک، در پهنه سنندج-­ سیرجان جنوبی و در درون توالی آتشفشانی-­ رسوبی بایمود­ال و دگرگون شده ژوراسیک میانی رخ داده است. کانه­زایی با شکل هندسی اغلب چینه­سان و لایه­ای و صفحه­ای شکل و در چندین افق چینه­ای خاص به­همراه رسوبات بروندمی (exhalites) در واحدهای 1،2 و 3 رخ داده است که در واحدهای 1 و 2 به­صورت رخدادهای معدنی متعدد و در واحد 3 به­صورت کانسار چاه­گز و تعدادی رخداد معدنی است. سنگ­های میزبان کانه­­زایی به ترتیب اهمیت، متاتوف ریولیتی، متاپلیت توفی و متاریولیت هستند. بافت ماده معدنی به صورت توده­ای، نیمه توده­ای، نواری، لامینه، دانه پراکنده و رگه – رگچه­ای است. پاراژنز کانسنگ شامل کانی­های اولیه پیریت، اسفالریت، گالن، کالکوپیریت، تتراهدریت، آرسنوپیریت، بورنیت و پیروتیت و کانی­های ثانویه از جمله کوولیت، کالکوسیت، مالاکیت، سروسیت و اسمیت­سونیت بوده و کانی­های باطله بیشتر سریسیت، کوارتز، کلریت، کلسیت و باریت است. دگرسانی­های سنگ دیواره به­طور عمده شامل دگرسانی سریسیتی و کلریتی و به مقدار کمتر دگرسانی­های کربناتی و سیلیسی است. سنگ­های میزبان دگرسان شده در اثر دگرگونی و دگرشکلی دچار برگوارگی شده و به همراه ماده معدنی دچار چین­خوردگی و گسلش  شده و بافت­ها و فابریک­های کاتاکلاستیک، پیوستگاه سه گانه، سایه فشاری و کنگره­ای (کرنیولیشن) و بودیناژ در آنها گسترش یافته است. بر اساس مطالعات زمین­شناسی، کانی­شناسی، ژئوشیمی و دگرسانی، کانه­زایی روی- سرب- مس در منطقه چاه­گز در اثر فعالیت­های آتشفشانی زیردریایی در یک حوضه کافتی کمانی، به­صورت سولفید توده­ای آتشفشانزاد (VMS) نهشته شده و سپس به همراه سنگ­های درون­گیر توسط فازهای کوهزایی کیمرین جوان و لارامید و رویدادهای جوان­تر دچار دگرشکلی و دگرگونی ناحیه­ای در حد رخساره شیست سبز شده است. این کانه­زایی بر اساس مقایسه آن با نهشته­های مشابه جهانی، بیشترین شباهت را به تیپ سیلیسی­آواری فلسیک مثل کانسار­های منطقه معدنی باتورست (Bathurst) کانادا و کمربند پیریتی ایبریا اسپانیا و پرتغال دارد که برای اولین بار در ایران معرفی می­شود.  }, keywords_fa = {چاه گز,سولفید توده ای,VMS,باتورست,سنندج-سیرجان جنوبی}, url = {http://www.gsjournal.ir/article_54451.html}, eprint = {http://www.gsjournal.ir/article_54451_0a56b69915a89cd5fa90a499679e9dcd.pdf} } @article { author = {Saki, A. and Baharifar, A. A.}, title = {Common Melting Reactions and Their Characteristics in the Alvand Aureole Metapelites, Hamadan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {165-172}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54452}, abstract = {Intrusion of the Alvand complex (intrusions formed during Jurassic) into the host metapelitic rocks (schists) created pelitic hornfelses and anatectic migmatites in the Alvand aureole. Partial melting in the Alvand aureole was restricted to pelitic bulk compositions. Existing of spinel-quartz minerals and appearance of orthopyroxene in these rocks marks the transition from amphibolite- to granulite-facies conditions, and is commonly attributed to the process of fluid-absent partial melting. Reactions Sil/And +‏ Bt = Crd +‏ Spl+‏ Kfs + melt and Bt+Als+Pl+Qtz = Grt+Kfs+melt, are the most reactions for the development of melt in the metapelitic rocks of Alvand aureole. This metamorphism is mainly controlled by conductive heat transter through magmatic intrusions into all levels of the crust. The Hamadan metamorphic rocks have experienced multiple episodes of metamorphism driven by burial and heating during arc construction and collision during subduction of a Neotethyan seaway and subsequent oblique collision of Afro-Arabia (Gondwana) with the Iranian microcontinent in the Jurassic-Cretaceous, and these events are associated with local partial melting at high grades, near the Alvand complex pluton.  }, keywords = {Migmatite Rocks,Alvand Aureole,Melting Reaction,Granulite-Facies}, title_fa = {واکنش‌های متداول ذوب و مشخصة آنها در سنگ‌های رسی دگرگون-شده هاله الوند، همدان}, abstract_fa = {نفوذ کمپلکس الوند در سنگ­های رسی دگرگون‌شده میزبان (شیست‌ها) سبب ایجاد هورنفلس­های رسی و میگماتیت­های آناتکسی در هاله دگرگونی توده شده است. پدیدة ذوب‌بخشی در هاله همبری الوند، فقط در سنگ­های  با ترکیب رسی رخ داده است. وجود کانی­های اسپینل-کوارتز و حضور ارتوپیروکسن در این سنگ­ها، مشخصه گذر از شرایط رخساره آمفیبولیت به گرانولیت یا پیروکسن- هورنفلس است و معمولاً مرتبط با فرایندهای ذوب‌بخشی بدون آب است. مهم‌ترین واکنش­های توسعه مذاب در سنگ­های رسی دگرگون‌شدة موجود در هاله الوند عبارتند از ‏Crd + melt ‏+ Spl +‏ Bt +Sil/And =  Kfs و Bt+Als+Pl+Qtz = Grt+Kfs+melt. این دگرگونی اصولاً از راه رسانش گرمایی از نفوذ توده­های مرتبط با کمان ماگمایی در همه سطوح پوسته کنترل می­شود. سنگ­های دگرگونی منطقه همدان تحت تأثیر یک دگرگونی چند مرحله­ای تدفینی و گرمایی مرتبط  با فرورانش و بسته‌شدن اقیانوس نوتتیس و در نهایت، برخورد دو قاره عربی و ایران مرکزی در طی کرتاسه قرار گرفته­اند، به گونه‌ای که این وقایع، سبب شکل­گیری ذوب‌بخشی در درجات بالای دگرگونی در بخش­هایی از هاله دگرگونی کمپلکس نفوذی الوند شده­اند.}, keywords_fa = {سنگ های میگماتیتی,هاله الوند,واکنش های ذوب,رخساره پیرکسن- هورنفلس}, url = {http://www.gsjournal.ir/article_54452.html}, eprint = {http://www.gsjournal.ir/article_54452_ab57f63590b2df8f9b86713bf967cc36.pdf} } @article { author = {Arfania, R.}, title = {Analysis of the Mesoscopic Brittle and Ductile-brittle Structures in the Metamorphic Area of Southeastern Eghlid}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {173-180}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54453}, abstract = {The study area, located in 40 km southeast of Eghlid town, is a  metamorphozed terrain  situated between the Eghlid fault and the Zagros Main Thrust and is a part of the southeastern Sanandaj-Sirjan Zone. The area consists of the highly deformed rocks which have been emerging clearly in dextral shear zones. Mesoscopic scale analysis carried out for determining the paleostress directions and deformation history of the area. Thus mesoscopic faults, joints and veins were measured and analyzed based on the field measurements and statistical methods. Then fitting structural models were presented for each of them. Furthermore, formation ages of the structures were considered based on relative time scale. According to the results, it can be concluded that two different deformation phases were effective in formation of the analyzed structures.  }, keywords = {Sanandaj-Sirjan,Joint,Vein,Mesoscopic fault,Eghlid fault}, title_fa = {بررسی ساختارهای مزوسکوپی شکننده و شکننده-شکل پذیر در منطقۀ دگرگون شدۀ جنوب خاور اقلید}, abstract_fa = {منطقۀ مورد مطالعه در 40 کیلومتری جنوب خاور شهرستان اقلید، در منطقه­ای دگرگون­شده، حد فاصل گسل اقلید و راندگی اصلی زاگرس واقع شده است و بخشی از پهنۀ سنندج-سیرجان جنوب­خاوری است. این منطقه شامل سنگ­های به شدت دگرشکل شده­ای است که آشکارا در یک پهنۀ برشی راست­گرد تکوین یافته­اند. مطالعات انجام­شده در این منطقه در مقیاس مزوسکوپی برای تعیین جهت تنش­های دیرینه و تعیین تاریخ دگر­شکلی انجام شده است. بر این اساس، گسل­های مزوسکوپی، درزه­ها و رگه­ها بر پایۀ مطالعات میدانی و روش­های آماری بررسی و اندازه­گیری شدند. سپس مدل مناسب در شکل­گیری هر یک از ساختارها پیشنهاد شد. همچنین بر اساس مقیاس زمان نسبی، سن نسبی تشکیل ساختارهای بررسی شده، مورد توجه قرار گرفته است. با استفاده از نتایج به­دست آمده، دو رویداد دگرشکلی مختلف در تکوین ساختارهای بررسی شده در این منطقه مؤثر بوده است.}, keywords_fa = {سنندج-سیرجان,درزه,رگه,گسل مزوسکوپی,گسل اقلید}, url = {http://www.gsjournal.ir/article_54453.html}, eprint = {http://www.gsjournal.ir/article_54453_30147398f7d64202983aae6742e9e687.pdf} } @article { author = {Rajabi, S. and Eliassi, M. and Saidi, A. and Shahidi, A.}, title = {North-Tehran Tectonic Wedge, Dynamic or Geomorphic Wedge?}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {181-186}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54454}, abstract = {In this research, heterogeneous fault slip data are used as the main data for doing paleostress analysis in North-Tehran tectonic wedge, which is restricted between Mosha and North-Tehran faults. Using these data and paleostress methods, the studied area is divided into 15 smaller stable stress regions and the mean stress tensor related to each region is determined. Then, stress events are separated using Multiple Inverse Method. Based on mean stress tensors -obtained from stress regions- and rotation of fault data orientation -based on Anderson’s theory in compressional tectonic regimes-, the stress trajectory map is sketched for mean stress tensors acting in the regions during geological time. Configurations of trajectories show that they seem to obey the overall tectonic regime in Iran. This result refutes that the North-Tehran tectonic wedge could be a dynamic wedge.}, keywords = {Stress event separation,Heterogeneous fault slip data,Multiple inverse method,Stress Trajectory,Wedge Tectonic}, title_fa = {گوه زمین‌ساختی شمال تهران، گوه دینامیکی یا زمین‌ریختی؟}, abstract_fa = {در این پژوهش، از داده­های ناهمگن لغزش گسلی به عنوان داده­های اصلی برای تحلیل تنش دیرینه در گوة زمین‌ساختی شمال تهران، بین دو گسل مشا و شمال تهران استفاده شده است. با استفاده از این داده­ها و با کمک روش‌های تنش دیرینه، ابتدا به پهنه‌بندی منطقه مورد مطالعه پرداخته شد. بر این اساس، منطقه به 15 پهنه پایدار تنشی تفکیک شده و میانگین تنش دیرینه در هر یک از این محدوده­ها به‌دست آمد. سپس در هر پهنه با روش وارونه‌سازی چند‌مرحله‌ای، به تفکیک فازهای تنشی پرداخته شد. در گام بعد، بر اساس میدان تنش میانگین به‌دست آمده از هر پهنه و چرخش داده­های گسلی بر اساس انگاره اندرسن برای رژیم تنشی فشاری، نقشه خط‌های گذر محورهای تنش برای میدان تنش میانگین حاکم بر منطقه در طول زمان زمین‌شناسی رسم شد. آرایش خط‌های گذر تنش بیشینه، نشانگر پیروی آنها از رژیم تنشی کلی حاکم بر پوسته ایران است و دینامیک گوه زمین‌ساختی شمال تهران را رد می‌کند.}, keywords_fa = {تفکیک فازهای تنش,داده‌های ناهمگن لغزش گسلی,روش وارونه‌سازی چند مرحله‌ای,خط‌های گذر محورهای تنش,گوه زمین‌ساختی}, url = {http://www.gsjournal.ir/article_54454.html}, eprint = {http://www.gsjournal.ir/article_54454_8de34650b3614efb3137f5997497ce59.pdf} } @article { author = {Sharifi Najafabadi, R. and Moairy, M. and Ghayoor, H. A. and Safaei, H. and Seif, A.}, title = {The Effect of Main Recent Fault on Forming of Quaternary LakesCase Study: Ancient Zayandehrood, Kakolestan and Azna Lakes}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {187-194}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54455}, abstract = {One of The important subjects about Zagros mountain  range is the lack of coordination between its drainages and geologic structure. This subject on Zayandehrood drainage system has become one of the most challenging discussions and three different theories have been proposd . To remove these disagreements and to achieve a general conclusion, this basin and two basins of Azna and Kakolestan at a distance of 62 and 85 km form its north east limit were studied exactly in library and in the field. With referrer to different evidence obtained from the condition of river terraces, lake sediments and fossils, cirques and glacial sediments and active tectonic, it may be concluded that during  Pliocene the Zagros  drainages have been flowing toward Persian Gulf, but this drainages have been trapped because of the activity of Main Recent Fault at late this period or Early  Pleistocene  and formed some lakes. Later as the result  of some processes that most of them have been of tectonic origin, the bed of these lakes were disintegrated and the water stream was flowed in Kakolestan and Azna’s basins at the previous direction and in Zayandehrood basin at the revers direction.                                                  }, keywords = {Zagros mountain range,Main Recent Fault,Quaternary lakes,Zayandehrood Basin,Active Tectonics}, title_fa = {تأثیر گسل جوان زاگرس بر شکل گیری دریاچه های کواترنری مطالعه موردی: کهن دریاچه های زاینده رود، کاکلستان و ازنا}, abstract_fa = {  یکی از موضوعات مهم دربارة رشته کوه زاگرس، ناهماهنگی بین برخی ازآبراهه­ها و ساختار زمین­شناسی آن است. این موضوع در مورد شبکه آبراهه­های زاینده­رود به یکی از بحث برانگیزترین مباحث تبدیل شده، به گونه­ای که در این باره سه فرضیه متفاوت عنوان شده است. برای رفع این اختلاف نظرها و رسیدن به یک نتیجه­گیری کلی، این حوضه و دو حوضه کاکلستان و ازنا  به  فاصله 62 و 85 کیلومتری شمال خاوری آن، مورد مطالعه دقیق کتابخانـه­ای و میدانی قرار گرفتند. به استناد شواهد مختلف به دست آمده از وضعیت پادگانه­های رودخانه­ای، رسوبــات و فسیل­های دریاچه­ای، سیرک­ها و رسوبات یخچالی و زمین­ساخت فعال نتیجه­گیری شده که در طی پلیوسن، عموم سرشاخه­های رودهای زاگرس به سمت خلیج فارس جاری بوده­اند. اما، بسیاری از این آبراهه­ها در اواخر این زمان و یا اوایل پلیستوسن، در اثر فعالیت گسل جوان زاگرس به دام افتاده و دریاچه­هایی را تشکیل داده­اند. بعد­ها در اثر فرایند­هایی که بیشتر زمین­ساختی بوده­اند، بستر این دریاچه­ها گسیخته شده و جریان آب در حوضه­های ازنا و کاکلستان در مسیر قبلی و  در حوضه زاینده­رود در مسیر معکوس جاری شده است.  }, keywords_fa = {رشته کوه زاگرس,گسل جوان‌زاگرس,دریاچه کواترنری,حوضه زاینده رود,زمین ساخت فعال}, url = {http://www.gsjournal.ir/article_54455.html}, eprint = {http://www.gsjournal.ir/article_54455_03781757eb6b6d733cb7785b8891d43f.pdf} } @article { author = {Foroutan, M and Nazari, H. and Meyer, B. and Sébrier, M. and Fattahi, M. and Le Dortz, K. and Ghorashi, M. and Hessami, Kh. and Ghassemi, M. R. and Talebian, M.}, title = {Late Pleistocene-Holocene Right- Slip Rate of The Dehshir Fault, Central Iran Plateau}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {195-206}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54458}, abstract = {The evaluation of  seismic potential along the Dehshir fault with 550-km  length (by count of northern and southern splays) is critical considering that more than 3.5 million people live in cities and towns located at vicinity of the fault. The Dehshir fault is considered as westernmost limit of N-striking dextral strike-slip faults set that slice Central and eastern Iran. Due to the  lack of large recorded earthquakes (instrumental and historical) in Central Iran, access to seismic potential of active faults by studying the earthquake catalogs seems to be impossible. No instrumental earthquake has been recorded greater than mb 4.7 around the Dehshir fault and also historical data shows no evidence for occurrence of large earthquake around the fault. No sign of destruction in Marvast historical castle (at a less than 10 km far from the Dehshir fault) built in Islamic period (~700-1250), shows any remarkable seismic activity until 750-1300 years ago. However, several evidence of geomorphologic markers such as drainages, gullies, streams and alluvial fans offsets, represent activity of the Dehshir fault in Late Quaternary. Of Geomorphic evidence at Marvast and Harabarjan sites record dextral - slip on the Dehshir fault during the Late Pleistocene-Holocene as major movement with minor dip - slip component. Rake of the fault movement has been considered for assessing to amount of horizontal and vertical slip rate on the Dehshir fault. This value in the North Marvast site has been calculated ~10 degrees and according to right bank offset on the Marvast river is ~7 degrees with horizontal and vertical displacements of 13 m and 1.5 m, respectively. Combining cumulative offset markers with OSL dating implies the Dehshir fault in Late Pleistocene-Holocene time period slips at horizontal and vertical components about 1±0.3 and 0.1 mm yr-1, respectively. We observed a minimum dextral offset along the Marvast fault segment in west of Harabarjan about 2 m that allow us assuming the related magnitude and date of last large paleoearthquake on the Dehshir fault is about Mw 7 and 2000 years ago, respectively.  }, keywords = {Slip Rate,Dehshir Fault,Fault segment,Rake,Optically Stimulated Luminescence (OSL),Holocene}, title_fa = {آهنگ لغزش راست بر گسل دهشیر در بازه زمانی پلیستوسن پایانی- هولوسن،فلات ایران مرکزی}, abstract_fa = {برآورد توان لرزه­ای گسل دهشیر با درازای حدود 550 کیلومتر (با لحاظ پایانه­های شمالی و جنوبی) در شرایطی که جمعیت ساکن با فاصله چند ده کیلومتری گسل به بیش از 5/3 میلیون نفر می­رسد، از اهمیت خاصی برخوردار است. به دلیل نبود داده­های زمین­لرزه دستگاهی و تاریخی بزرگ بر روی گسل­های جنبای اصلی در گسترة ایران مرکزی، دست­یابی به توان لرزه­ای این گسل­ها بر اساس بررسی کاتالوگ­ زمین­لرزه­ای نا­ممکن می­نماید. تا به امروز زمین­لرزه دستگاهی با بزرگای بیش از 7/4mb  در پیرامون گسل دهشیر ثبت نشده است. از سوی دیگر، بررسی داده­های تاریخی نشانی از زمین­لرزه تاریخی بزرگی در نزدیکی گسل دهشیر به­دست نمی­دهد. نبود نشانه­های ویرانی در قلعه تاریخی مروست با قدمت دوره اسلامی (در حدود 1250-700 میلادی) که در فاصله کمتر از 10 کیلومتری گسل دهشیر جای دارد نیز گواهی در تایید نبود جنبش لرزه­ای بزرگ تا 1300-750 سال گذشته است. با این وجود، گواه­های ریخت‌زمین­ساختی بسیاری از جمله جابه­جایی سامانه­ای (systematic) آبراهه­های کوچک و بزرگ، رودخانه­ها و بادبزن­های آبرفتی، همگی گویای جنبایی گسل دهشیر در بازه زمانی کواترنری پایانی است. گواه­های ریخت‌زمین­ساختی ارائه­شده در گستره جغرافیایی مروست و هرابرجان نشان از حرکت اصلی گسل دهشیر در بازه زمانی پلیستوسن پایانی- هولوسن به­صورت راستالغز راست­بر، به همراه مؤلفه فرعی شیب­لغز دارد. به منظور دست­یابی به آهنگ لغزش سالانه افقی و شاقولی بر روی گسل دهشیر، ریک (rake) حرکتی گسل دربازه زمانی مورد اشاره در ساختگاه (site) شمال مروست در حدود 10 درجه و برای کرانه سمت راست رودخانه مروست با جابه­جایی افقی و شاقولی به ترتیب برابر با 13 و 5/1 متر، نزدیک به 7 درجه لحاظ شده است. با توجه به جابه­جایی­های تجمعی اندازه­گیری شده در درازای پاره­گسل (fault segment) مروست و در نظر گرفتن نتایج سن­سنجی به روش لومینسانس نوری، آهنگ لغزش سالانه مؤلفه افقی گسل در بازه زمانی مورد بررسی برابر با 1- mmyr3/0±1 و برای مؤلفه شاقولی در حدود 1- mmyr1/0 قابل برآورد است. با توجه به شماره آهنگ لغزش حاصل و در نظر گرفتن مقدار کمینه جابه­جایی راست­بر یافت­شده در این پژوهش (به میزان 2 متر در باختر دهستان هرابرجان) و در درازای پاره­گسل مروست از سامانه گسل دهشیر می­توان رخداد آخرین زمین­لرزه بزرگ دیرینه را با بزرگای Mw~ 7 به حدود 2000 سال گذشته نسبت داد.}, keywords_fa = {آهنگ لغزش,گسل دهشیر,پاره گسل,ریک,لومینسانس نوری,هولوسن}, url = {http://www.gsjournal.ir/article_54458.html}, eprint = {http://www.gsjournal.ir/article_54458_9cd3a2c1fd4ad496120b58282a3f2fe5.pdf} } @article { author = {Nezhadafzali, K. and Lak, R. and Sarvati, M. and Bayatani, F.}, title = {Introuduction and Study of Nezhad Afzali Mudvolcanoe Site, Gatan Mudvolcanoes and Geotourism Significance of Them(Jask)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {207-214}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54484}, abstract = {Mud volcanoes are natural and site-seeing phenomena in the world, particularly in the Alps and Himalayas belts.  Mud volcanoes usually appear in form of a dome or a pool. The mud volcanoes comprise water, gas and mud. with plenty of applications, like tourism, mud therapy, supplying of essential body trace elements, and their usage as mud for pottery. In Iran most of the mud volcanoes appear in coastal plains of the Caspian and Oman Seas. A mud flow was formerly found between Minab and Jask in Hormozgan Province. These types of exclusive, beautiful and natural phenomena require more attention by tourism industry. On the other hand, mud flow must be introduced as the most important geotourism phenomenon of northern coast of the Oman Sea. In this research, after data collection, including topography and geology maps, AIRS satellite data and aerial photos, remote sensing verifications were implemented. Then, mud flow determination was completed by field work studies and checking. A sediment sample was taken from each mud flow in the field work, then analyses of major, accessory and trace elements were carried out by using ICP-OES. About 30 small and big mud volcanoes around of Gavak mountain and 6 mud volcanoes at Gatan and Tojak area were determined in Hormozgan province that they have not been introduced before. The biggest mud volcanoe (Aryana) has cone with 73m hight at Gatan area and the smallest one has cone with less than 1m at Gavak area. Meantime, hydrogeochemical studies or determination of the percentage of available elements for all mud volcanoes were implemented. Since this geomorphological phenomenon indicates tectonic activity of a region, hence there is a possibility of mild earthquake and faulting occurrence. This issue must be considered in construction of buildings and certain fixed structures, such as bridges. Emitted gases through mud volcanoes relatively indicate the internal conditions of the Earth, particularly existence of oil and gas reservoirs.  Mud flow is an index for availability of oil and gas reservoirs.  They are used for prediction of availability of these reservoirs inside the Earth.}, keywords = {Nezhad afzali Mud volcano site,Geotorism,Gatan,Jask,Iran}, title_fa = {معرفی و بررسی سایت گل‌فشانی نژاد ‌افضلی،گل‌فشان‌های گتان شهرستان جاسک و اهمیت زمین‌گردشگری آنها}, abstract_fa = {گل‌فشان یک پدیده طبیعی و دیدنی است که معمولا به صورت یک  سیمای گنبدی‌شکل و در بعضی مواقع به صورت حوضچه‌ای یافت می‌شوند. این گل‌فشان‌ها مخلوطی از آب، گل و گاز هستند و کاربردهای زیادی از جمله جاذبه گردشگری، گل درمانی، تأمین عناصر کمیاب بدن و استفاده در کوزه‌گری دارند. این شکل‌ها در بیشتر نقاط دنیا  به‌ویژه در کمربند آلپ و هیمالیا قابل مشاهده است و در ایران، بیشتر در جلگه‌های ساحلی دریای خزر و دریای عمان دیده می‌شوند. در استان هرمزگان قبلا  فقط یک یا دو گل‌فشان بین جاسک و میناب  شناسایی شده بود. این پدیده‌های زیبا و منحصر به فرد، نیازمند توجه بیشتر در صنعت گردشگری هستند  باید آن‌را مهم‌ترین پدیده زمین گردشگری  سواحل شمالی دریای عمان معرفی کرد. در این پژوهش، پس از گرد‌آوری اطلاعات و داده‌های دفتری شامل نقشه‌های توپوگرافی، زمین‌شناسی، داده‌های ماهواره‌ای IRS و عکس‌های هوایی، بررسی‌های دور‌سنجی انجام شد و سپس با مطالعات صحرایی و کنترل زمینی، شناسایی گل‌فشان‌ها کامل شد. در عملیات صحرایی از هر گل‌فشان یک نمونه رسوب برداشت و تجریه  عناصر اصلی، فرعی و  جزئی توسط دستگاه ICP-OES بر روی آن انجام شد. نزدیک به 30 گل‌فشان بزرگ و کوچک فعال در خاور تنگه هرمز در محدوده کوه گوک و 6 گل‌فشان در محدوده روستاهای گتان و توجک شناسایی و بررسی شد، که پیش از این معرفی نشده بودند. بزرگ‌ترین گل‌فشان، دارای مخروطی با ارتفاع 73 متر از سطح زمین‌های اطراف در محدوده روستاهای گتان  و کوچک‌ترین آن دارای مخروطی با ارتفاع کمتر از یک متر در محدوده  گوک است. همچنین مطالعات ژئوشیمی یا تعیین مقدار عناصر موجود در رسوبات برای کلیه گل‌فشان‌ها انجام شد.از آنجا که وجود این پدیده ژئومرفولوژیکی در هر منطقه نشانه فعالیت زمین‌ساخت آن منطقه است، بنابراین احتمال رخداد زمین‌لرزه خفیف و گسل‌خوردگی وجود دارد که این امر باید در احداث ساختمان‌ها و سازه‌های  ثابت، مانند پل‌ها لحاظ شود. همچنین گل‌های خارج شده از آنها می‌تواند تا حدی مشخص‌کنندة وضعیت درونی زمین  باشد. گل‌فشان‌ها به‌عنوان شاخص میدان‌های گازی و نفتی شناخته شده‌اند و از آنها  برای پیش‌بینی وجود میدان‌های نفتی و گازی در اعماق زمین  استفاده می‌شود.}, keywords_fa = {سایت گل‌فشانی نژاد افضلی,گردشگری,گتان,جاسک,ایران}, url = {http://www.gsjournal.ir/article_54484.html}, eprint = {http://www.gsjournal.ir/article_54484_982fb39e87818f01b985c7264151d01b.pdf} } @article { author = {Hashemi Tabatabaei, S. and Salamat, A. S. and Mohamadi, A.}, title = {Soil Classification using Shear Wave Velocity in Shiraz City based on Building Codes}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {215-222}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54506}, abstract = {Seismic site characterization studies are carried out in earthquake- prone areas. In these studies seismic design parameters are chosen based on engineering geological and geotechnical characteristics of the site. Site classification is addressed in various building codes. Codes define various methods for soil classification such as measurement of average shear wave velocity up to 30 meters depth. This paper present a part of the seismic geotechnical microzonation study of Shiraz city based on seismic data for soil classification. This method, measures the travel times of multiple elastic waves along the interface of layers having different velocities. In this study a seismograph with an array of 24 geophones and 3.75m intervals was used. The shear wave velocity distribution estimated for 3 different seismic layers. Seismic bedrock was defined as layer for which shear wave velocity is more than 750 m/s. Depth of seismic bedrock was estimated to vary about 1 to 29m.The average shear wave velocity up to depth of 30 m ranges about 375 to 1253m/s. Based on the results soil profile in Shiraz were classified and compared with the Standard No. 2800 and Eurocode-08. The result indicated that Shiraz city can be placed in "site class I" and "site class B, E and A" respectively. The study revealed that Standard No. 2800 site classification should be modified. }, keywords = {Seismic geotechnical microzonation,Shear wave velocity,Soil type,Building codes,Design spectrum}, title_fa = {رده‌‌بندی نوع زمین با استفاده از سرعت موج برشی در گستره شهر شیراز بر اساس آیین‌نامه‌های ساختمانی}, abstract_fa = {مطالعات ویژگی‌‌های لرز‌ه‌ای ساختگاه، در مناطق مستعد زلزله انجام ‌می‌‌شود. در این مطالعات، پارامتر‌های طراحی لرزه‌ای ساختگاه بر اساس ویژگی‌های زمین‌شناسی مهندسی و ژئوتکنیک تعیین می گردد. در این راستا بخشی از آیین‌نامه‌های ساختمانی به رده‌بندی ساختگاه اختصاص دارد. به منظور رده‌بندی زمین، آیین‌نامه‌ها روش‌های متنوعی همانند میانگین سرعت موج برشی تا ژرفای 30 متر را ارائه می‌نمایند. این مقاله، بخشی از مطالعات ریزپهنه‌بندی ژئوتکنیک لرزه‌ای شهر شیراز برای تعیین نوع زمین در قالب مطالعات لرزه‌ای شکست مرزی را ارائه می‌دهد. روش مورد نظر، زمان سیر امواج الاستیک چندگانه را در طول سطح مشترک لایه‌هایی که سرعت‌های متفاوت دارند اندازه‌گیری ‌می‌کند. در این مطالعات از لرزه نگار 24 ژئوفونی با فواصل 75/3 متری استفاده شد. سرعت موج برشی برای سه لایه مختلف لرزه‌ای برآورد شد. سنگ بستر لرزه‌ای به لایه‌ای اطلاق می‌شود که در آن سرعت موج برشی به بیش از 750 متر بر ثانیه می‌رسد. ژرفای سنگ بستر لرزه‌ای در شهر شیراز از حدود 1 تا 29 متر اندازه‌گیری شد. میانگین سرعت موج برشی تا ژرفای 30 متر بین 375 تا 1253 متر بر ثانیه متغیر است. با توجه به نتایج به‌دست آمده، نوع زمین در شهر شیراز بر اساس استاندارد 2800 و آیین‌نامه اروپا رده‌بندی و با یکدیگر مقایسه شدند. نتایج نشان می‌دهد که گستره شهر شیراز با توجه به آیین نامه2800 در گروه I و بر اساس آیین‌نامه اروپا، به طور عمده در گروه B و E و در برخی مناطق در گروه A رده‌بندی ‌می‌شود. مقایسه نتایج نشان داد که رده‌بندی خاک در استاندارد 2800 نیاز به اصلاح دارد.}, keywords_fa = {ریزپهنه‌بندی ژئوتکنیک لرز‌ه‌ای,سرعت موج برشی,نوع زمین,آیین‌نامه ساختمانی,طیف طراحی}, url = {http://www.gsjournal.ir/article_54506.html}, eprint = {http://www.gsjournal.ir/article_54506_2766f6d5d2f701f4d27a3a32161dbdd1.pdf} } @article { author = {Khorrami, F. and Hessami, K. and Nankali, H.R. and Tavakoli, F.}, title = {Active Tectonics of Alborz Mountain using Continuous GPS Measurements}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {223-230}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54507}, abstract = {We present the results of continuous GPS measurements to interpret present-day kinematic along and across northern Iran (i.e. the Alborz mountain range and northern part of Central Iranian Block (CIB)). In this study velocity field and geodetic strain rate of 30 CGPS stations from 2005 to 2009 were calculated in order to indicate active deformation of the region. The obtained velocity field suggests that western and central part of the Alborz mountains accommodate the convergence between Arabia and Eurasia mainly through shortening at a rate of ~6 mm/yr and 2 mm/yr left-lateral strike slip motion while the eastern Alborz accommodates the differential motion on either side of the range by left-lateral strike slip faults at ~5 mm/yr, as well as 2 mm/yr shortening across the range. It can be deduced from the velocity vectors that main portion of the shortening (~70%) in the western and central Alborz is mainly taken up along the North Alborz and western Khazar faults. It is also evident from the site velocities that ~3 mm/yr shortening is occurring in CIB, i.e. ~1.5 mm/yr on northern side of CIB (along the Parchin-Pishva-Robatkarim faults) and ~1.5 mm/yr along the Tafresh fault. These observations strongly suggest that CIB is not a rigid block. Principal axes of geodetic strain-rate tensor showed that mainly compressional deformation occurs in western Alborz while transpressional deformation is dominant in eastern Alborz. Strain rate decreases in south and south-western parts of the belt, as approaches the CIB. We also observe copmressional deformation in northern margin of CIB. Finally, we indicate that the present-day kinematics of the Alborz mountains is consistent with geological evidence and active tectonics of the region.}, keywords = {Continuous GPS network,Alborz,kinematic,Velocity field,Geodetic strain rate,Central Iran}, title_fa = {بررسی زمین‌ساخت جنبا در منطقه البرز با استفاده از مشاهدات شبکه دائمیGPS}, abstract_fa = {در این مقاله با استفاده از اندازه‌‌گیری‌های شبکه دائمی GPSایران، سینماتیک کنونی شمال ایران (بخش شمالی ایران مرکزی و پهنه البرز) در بازه زمانی 2009-2005 مورد مطالعه قرار می‌گیرد و چگونگی دگرشکلی این منطقه با استفاده از میدان سرعت و آهنگ کرنش ژئودتیک بررسی خواهد شد. میدان سرعت حاصل از توزیع کنونی ایستگاه‌های دائمی GPS نشان می‌دهد در البرز خاوری ~5 mm/yr حرکت امتدادلغز چپ‌گرد و ~2 mm/yr کوتاه‌شدگی وجود دارد، در حالی‌که در البرز مرکزی- باختری مقدار حرکت امتدادلغز چپ‌گرد و کوتاه‌شدگی به ترتیب برابر  2 mm/yrو ~6 mm/yr است. قابل توجه است که حدود 70٪ کوتاه‌شدگی موجود در البرز مرکزی- باختری (~4 mm/yr) روی گسل‌های شمال البرز و خزر باختری و مابقی (~2 mm/yr)در دامنه‌های جنوبی رخ می‌دهد، بنابراین میدان سرعت حاصل، به‌خوبی نشان می‌دهد که در البرز مرکزی و باختری تغییرشکل عمدتاً از نوع فشارشی و در البرز خاوری از نوع امتدادلغز است. همچنین به نظر می‌رسد که ~3 mm/yr کوتاه‌شدگی در بلوک ایران مرکزی در حال رخ دادن است که مقداری از آن (~1.5 mm/yr) در بخش شمالی بلوک ایران مرکزی یعنی در حد فاصل گسل‌های پارچین-پیشوا-رباط کریم و بقیه آن (~1.5 mm/yr) روی گسل تفرش توزیع شده است. بنابراین می‌توان نتیجه گرفت که بلوک ایران مرکزی کاملاً صلب نیست. محورهای کرنش ژئودتیکی به‌دست آمده نیز نشان می‌دهند که دگرشکلی البرز خاوری از نوع فشارشی-برشی و دگرشکلی البرز باختری غالباً فشارشی می‌باشد. آهنگ کرنش در نواحی جنوب و جنوب باختری پهنه البرز، به‌دلیل قرارگیری روی بلوک ایران مرکزی کاهش می‌یابد. با توجه به راستای محورهای کرنش، در حاشیه شمالی بلوک ایران مرکزی (جنوب و جنوب باختر پهنه البرز) سازوکار فشارشی مشاهده می‌شود. همچنین در این مقاله نشان داده شده است که نتایج ژئودتیک حاصل با شواهد زمین‌شناسی و زمین‌ساخت جنبای منطقه البرز همخوانی بسیار زیادی دارد.}, keywords_fa = {شبکه دائمی GPS,البرز,سینماتیک,میدان سرعت,آهنگ کرنش ژئودتیکی,ایران مرکزی}, url = {http://www.gsjournal.ir/article_54507.html}, eprint = {http://www.gsjournal.ir/article_54507_09670967ee0545f990a1966a384e3326.pdf} } @article { author = {Ali Khasi, A. M. and Hosseini Barzi, M. and Shadan, M.}, title = {Sedimentary Environment and Provenance of Ab-Haji Sandstones in Cheshmeh Bakhshi and Sartakht-e-Shotoran Sections, Kalmard Block, Central Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {231-242}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54509}, abstract = {Determination of sedimentary environment, provenance and tectonic setting of Ab-Haji Formation sandstones (Lower Jurassic) have been carried out in Cheshmeh Bakhshi and Sartakht-e-Shotoran sections which are located in Kalmard Block. Facies analysis of sedimentary facies in mentioned sections implies three clastic faceis associations including delta plain, delta front and prodelta and two carbonate facies, relevant to bar. The obtained results from modal analysis and geochemical data point to cratonic tectonic setting and presence of qurtzose rocks in the source area in the course of recycling processes. Moereover, using the tectonic discrimination diagrams suggest that Ab-Haji sandstones have been deposited in a passive continental margin. The calculated chemical index of alteration (CIA) and the plagioclase index of alteration (PIA), based on major element oxides, denote moderate to intense weathering in the hinterland. This consequence is conformed with the modal analysis and petrographic evidence referring to humid and semi-humid climate.}, keywords = {Sedimentary Environment,Provenance,Geochemistry,Ab-Haji Formation,Kalmard Block}, title_fa = {محیط رسوبی و برخاستگاه ماسه‌سنگ های سازند آب حاجی در برش‌های چشمه بخشی و سرتخت شتران، بلوک کلمرد، ایران مرکزی}, abstract_fa = {در این مطالعه به بررسی محیط رسوبی، برخاستگاه و جایگاه زمین­ساختی ماسه‌سنگ‌های سازند آب­حاجی (ژوراسیک پیشین) در برش‌های چشمه­بخشی و سرتخت­شتران، واقع در بلوک کلمرد پرداخته شده است. تجزیه و تحلیل رخساره‌های رسوبی در این برش‌ها حاکی از وجود سه مجموعه رخساره­ای آواری شامل: رخساره‌های دشت دلتایی، رخساره‌های جلوی دلتا و رخساره‌های انتهای دلتا و نیز دو رخساره کربناته مرتبط با سد است. نتایج حاصل از تجزیه مدال و داده‌های ژئوشیمیایی به برخاستگاه زمین‌ساختی کراتون و چرخه مجدد و سنگ مادر رسوبی کوارتزی (حاصل چرخه مجدد رسوبی) اشاره دارند. همچنین استفاده از نمودارهای تفکیکی جایگاه زمین‌ساختی حاشیه غیرفعال قاره­ای را برای ماسه سنگ‌های آب حاجی نشان می‌دهد. شاخص‌های شیمیایی دگرسانی(آلتراسیون) (CIA) و دگرسانی پلاژیوکلاز (PIA) محاسبه شده، میزان هوازدگی در منطقه منشأ را متوسط تا شدید معرفی می‌کند. این امر با نتایج سنگ نگاری و تجزیه مدال ماسه‌سنگ­ها مبنی بر وجود شرایط آب و هوای مرطوب تا نیمه مرطوب همخوانی دارد.  }, keywords_fa = {محیط رسوبی,برخاستگاه,ژئوشیمی,سازند آب حاجی,بلوک کلمرد}, url = {http://www.gsjournal.ir/article_54509.html}, eprint = {http://www.gsjournal.ir/article_54509_70fb29ed847df82ad910a694ee25660f.pdf} } @article { author = {Rezaei, Y. and Mobasheri, M. R. and Valadanzouje, M. J.}, title = {Fast Noise Estimation in Hyperspectral Images Using Spectral Absorption Parameters}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {21}, number = {82}, pages = {243-248}, year = {2012}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2011.54510}, abstract = {Estimation of noise present in Hyperspectral images is a way to enhance the quality of the extracted information and to reduce the uncertainties in the results. The simplest method widely used in noise estimation is Shift Difference. This method has two weaknesses; first, it is based upon the assumption that the adjacent pixels have the same signal information which is not necessarily valid in hyperspectral data sets; second, in order to calculate the correct values of noise it needs homogeneous regions that is usually being determined by supervision. In this study, a new method in noise estimation (NETAL) is introduced. In this method the satellite images are divided into homogeneous regions using spectral absorption parameters such as location of absorption lines, width and depth of these absorption features for every individual pixels. Then in each region the noise was calculated using regression between adjacent bands and finally the total noise was estimated through accumulation of the calculated noises in each region. The NETAL algorithm was evaluated by using simulated and real hyperspectral data sets. The results show that the noise estimation by NETAL method is faster than Multiple Regression method while the accuracy will remain the same as and even better than the Multiple Regression method.}, keywords = {Absorption parameters,Hyperspectral Image,Noise Estimation}, title_fa = {استفاده از متغیرهای جذبی طیفی به‌منظور برآورد سریع نوفه در تصاویر ابرطیفی}, abstract_fa = {برآورد نوفه موجود در تصاویر ابرطیفی یکی از راه‌های افزایش کیفیت اطلاعات استخراج شده و کاهش عدم قطعیت در نتایج است. تا‌کنون ساده­ترین روش به‌کار گرفته شده در برآورد نوفه در این تصاویر، استفاده از روش اختلاف شیفت بوده­ است، اما این روش دارای دو نقطه ضعف است؛ اولاً مبتنی بر این فرض است که پیکسل‌های همسایه دارای اطلاعات سیگنال یکسانی هستند که الزاما در داده­های ابرطیفی صدق نمی­کند، ثانیاً برای محاسبه صحیح نوفه نیازمند استفاده از مناطق همگن است که غالبا این مناطق به‌صورت نظارت شده، تعیین می‌شوند. در این پژوهش روشی جدید برای برآورد نوفه (NETAL) معرفی شده­ است. در این روش، با استفاده از فضای منحنی بازتابندگی طیفی مواد و  باندهای جذبی و محل قرارگیری و ژرفای این باندها در طیف هر پیکسل، تصویر ماهواره­ای به پهنه‌های همگنی تقسیم‌بندی شد. سپس در هر پهنه نوفه با استفاده از روش رگرسیون بین هر دو باند مجاور، محاسبه شده و در نهایت نوفه کل، از جمع نوفه در هریک از نواحی به‌دست آمد. برای ارزیابی نتایج از داده­های شبیه‌سازی شده و داده­های ابرطیفی واقعی استفاده شد. نتایج به‎دست آمده نشان داد که برآورد نوفه توسط الگوریتم NETAL سریع‌تر و دقت برآورد آن برابر با الگوریتم رگرسیون چندگانه و در بعضی حالت‌ها بهتر از آن است.}, keywords_fa = {باندهای جذبی طیف,تصاویر ابرطیفی,برآورد نوفه}, url = {http://www.gsjournal.ir/article_54510.html}, eprint = {http://www.gsjournal.ir/article_54510_fc3f7846971194cc6164705c98956293.pdf} }