@article { author = {}, title = {سخن سردبیر}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {1-1}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {}, abstract = {سخن سردبیر}, keywords = {سخن سردبیر}, title_fa = {سخن سردبیر}, abstract_fa = {سخن سردبیر}, keywords_fa = {سخن سردبیر}, url = {http://www.gsjournal.ir/article_57630.html}, eprint = {http://www.gsjournal.ir/article_57630_5cc4bb0de8a96d7a319983da912bcd10.pdf} } @article { author = {Adabi, M.H. and Jamalian, M.}, title = {Recognition of Original Carbonate Mineralogy and Determination of Ore Genesis in Robat Mine (Khomein-Arak) Carbonates}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {2-23}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57629}, abstract = {     The studied area is located at the middle structural zone of Sanandaj-Sirjan in Malayer-Esfahan axis. Lower Cretaceous sequence disconformably overlay the Triassic-Jurassic sequences. The sediments have been folded during Middle Cimerian (Bajocian-Batonian) and Laramian (Upper Cretaceous) orogenic phases. The carbonate sequences are the host rock of Pb and Zn mineralization in Robat area. The true thickness of the sequence in south and north slopes of AregijehMountain are 256 m and 230 m respectively and in the south slope of BarAftabMountain is 408 m. Major and trace elements such as Ca, Mg, Sr, Na, Fe, Mn, Sr/Na, Sr/Mn, Sr/Ca and δ18O and δ13C isotope values in carbonates are used for recognition of original mineralogy. Trace elements and oxygen and carbon isotopes indicate a mixed calcite-aragonite original mineralogy. Petrographic and geochemical studies indicate that carbonates affected mostly by meteoric diagenesis in an open system. Paleotemperature calculation, based on lightest oxygen value, indicates that the diagenetic temperature was about 75ºc. The genetic types of ore deposits in Robat area is a kind of diagenetic-epigenetic forms, controlled by hydrothermal fluids at low temperature, similar to the Mississippi Valley Type deposits (MVT). The model of ore formation is illustrated below: The passage of meteoric waters through fractures and faults removed Pb, Zn and Mg from shale layers and precipitated the elements in the limestone rocks. The shale layers above the limestone sequences played as a feeder trap for lead and zinc deposits. Siliceous (jasperoid) and dolomitic alteration are the main alterations in the area.}, keywords = {Original mineralogy,Ore genesis,Robat Mine,Carbon and oxygen isotopes}, title_fa = {شناسایی ترکیب کانی‌شناسی اولیه و نحوة کانسار‌سازی در کربناتهای معدن رباط (خمین- اراک)}, abstract_fa = {     منطقة مورد مطالعه در باختر ایران مرکزی و در 32 کیلومتری باختر خمین قرار دارد و از نظر زمین‌ساختی در بخش میانی زون سنندج- سیرجان و در محور ملایر- اصفهان واقع است. سازندهای کرتاسة زیرین در این ناحیه، به‌صورت دگرشیب بر روی سازندهای تریاس بالایی- ژوراسیک قرارگرفته‌اند. با پیشروی دریا رسوبات ماسه‌سنگی-کنگلومرایی برجای گذاشته شده که بعداً با پیشروی بیشتر دریا، رسوبات آهکی کرتاسة زیرین ته‌نشین شده است. این رسوبات در طی فازهای کوهزایی سیمرین میانی (اواسط دوگر، باژوسین- باتونین) و لارامید (کرتاسة بالایی) چین خورده‌اند. واحدهای کربناتی در ناحیة رباط، سنگ میزبان کانی‌زایی سرب و روی است. ستبرای واقعی این واحد‌ها در دامنة جنوبی کوه اره‌گیجه حدود 256 متر، در دامنة شمالی کوه اره‌گیجه حدود 230 متر و در دامنة جنوبی کوه برآفتاب 408 متر است. مطالعات فسیل‌شناسی اوربیتولینها نشان داده است که آهکها سن آپسین دارند. نتایج حاصل از بررسی عناصر اصلی، جزئی و ایزوتوپهای پایدار اکسیژن 18 و کربن 13 و رفتار آنها نسبت به یکدیگر، ترکیب کانی‌شناسی اولیة مخلوط کلسیت-آراگونیت را نشان می‌دهد که قابل‌مقایسه با سنگ‌آهکهای با ترکیب کانی‌شناسی مخلوط کلسیت-آراگونیت سازند مزدوران در کپه‌داغ به سن ژوراسیک پسین است. مطالعات سنگ‌نگاری و ژئوشیمیایی حاکی از این است که سنگ‌آهکهای منطقه عمدتاً تحت‌تأثیر دیاژنز جوی در یک سامانه دیاژنزی کاملاً باز قرار داشته‌اند. محاسبات دمای دیرینه بر پایة سبک‌ترین ایزوتوپ اکسیژن نشان می‌دهد دمای دیاژنتیکی حدود oC75  بوده است. کانسار سرب و روی رباط از نوع دیاژنتیک-اپی‌ژنتیک و از نوع کانسار چینه‌کران بوده و با کانسارهای تیپ درة می‌سی‌سی‌پی (MVT) قابل‌مقایسه است. شیوة تشکیل کانسار به‌این‌صورت بوده است که آبهای جوی پس از گذر از درزه‌ها و شکستگیها، همراه با آبهای ناشی از تراکم و فشردگی شیلهای حوضه‌ای (ناشی از پدیدة آب‌زدایی) تحت‌تأثیر شیب زمین‌گرمایی گرم شده‌اند. این آبها پس از شستشوی مواد از مسیر خود باردار شده و توسط کمپلکسهای کلریدی توسط سیالات حمل شده‌اند. آبها این عناصر را در لایة کربناتی ته‌نشست داده‌اند. دگرسانی مشاهده شده در منطقه عمدتاً از نوع سیلیسی (ژاسپیروییدی) و دولومیتی است.}, keywords_fa = {کانی‌شناسی اولیه,کانسار‌سازی,معدن رباط,ایزوتوپهای اکسیژن و کربن}, url = {http://www.gsjournal.ir/article_57629.html}, eprint = {http://www.gsjournal.ir/article_57629_57b485bd0b207c90eb72f16be9f02729.pdf} } @article { author = {Kholghi, M. H. and Vossoughi Abedini, M.}, title = {Petrogenesis, Geodynamics and Radiometric Age Dating of Safakhaneh Mass, Northwest of Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {24-39}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57631}, abstract = {     Safakhaneh batholith, situated at 47 km southwest of Shahin Dezh, northwest of Iran, is located in the central Iran structural zone intersecting the Cretaceous rocks. The absolute age of the batholith, determined for the first time by K – Ar method, has been calculated 69.535 Ma. showing upper Cretaceous – Paleocene epoch and Laramide tectonic orogeny. Geochemical investigations of the batholith show that the major part of the batholith is of mantle magma, in which magmatic changes of the crystalline differentiation and contaminations have occurred. The crystalline differentiation has caused the formation of different rock types of quartz monzonite, quartz monzodiorite, tonalite, granodiorite and monzogranite respectively. Primary magma of the rocks is of calc - alkaline and generally metaluminous. The specifications of batholith rocks can be compared with the I – Type Caledonian granites. From the tectonic point of view, the specifications of the batholith can be comparable with the volcanic arc granitoids (VAG).     }, keywords = {Iran,Granite,Cretaceous,Partial Melting,Magma mixing,Calc -alkaline,Metalouminous,Radiometric age dating}, title_fa = {منشأ، سنگ‌زایی، ژئودینامیک و سن‌سنجی رادیومتری توده نفوذی صفاخانه (شمال باختر ایران)}, abstract_fa = {باتولیت صفاخانه در شمال باختری ایران (47 کیلومتری جنوب باختر شاهین‌دژ) واقع است. این باتولیت در لبه پهنه ساختاری ایران مرکزی  قرار دارد و سنگهای کرتاسه را بریده است. سن رادیومتری پدیدار شدن این باتولیت برای نخستین بار با روش K - Ar، 5/69 میلیون سال تعیین شده است. این سن،‌ بیانگر زمان کرتاسه پسین- پالئوسن و رخداد زمین‌ساختی لارامید است. بررسی ژئوشیمیائی این باتولیت نشان می‌دهد که  قسمت عمده ماگمای تشکیل دهنده این باتولیت ماگمای گوشته‌ای بوده است که درآن تحولاتی از نوع تفریق بلوری و آغشتگی صورت گرفته است. تفریق بلوری باعث تشکیل سنگهای متفاوت به ترتیب از نوع کوارتزمونزونیت، کوارتزمونزودیوریت، تونالیت، گرانودیوریت، مونزوگرانیت شده است. ماگمای مولد این سنگها از نوع کلسیمی – قلیایی (کلکو آلکالن) و بیشتر متاآلومین است. خصوصیات سنگهای این باتولیت  با گرانیتهای تیپ "I"  از گونه کالدونین قابل مقایسه است. از نظر موقعیت زمین‌ساختی ویژگیهای این باتولیت با گرانیتوییدهای کمان آتشفشانی (VAG) مطابقت دارد.              }, keywords_fa = {ایران,‌ گرانیت,کرتاسه,ذوب بخشی,آمیختگی ماگمایی,کلسیمی- قلیایی,‌متاآلومین,سن پرتوسنجی}, url = {http://www.gsjournal.ir/article_57631.html}, eprint = {http://www.gsjournal.ir/article_57631_1678cdd58e32c125ca58a9dd14097f5d.pdf} } @article { author = {Alipour, S.}, title = {Yarim-Ghayeh Cave(Study and Investigation)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {40-59}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57633}, abstract = {Yarim-ghayeh cave, located in the border of Iran and Turkey, is hosted by the Oliogocene-Miocene limestone  body.  Its in and outside rough topography implies that the cave is  very young and infact in the beginning  stage of its formation. Overall volume is 9600 m3  with 631 m2  dry area and 4700 m3 occupied by water with 4 to 6 meters in depth.  Structurally, the cave has been formed by a fault system cause a sinkhole form on the top of the cave aproximately of 10000 m2.  Its water is clean and clear with pH of 7.36  and its fluorine is only 1.7 ppm  compared to 4.5 ppm in Maku area.      Yarimghayeh playa  with an area of 5 m2 is in the close eastern part of the cave  with permenant water flow.  Elevation of the water surface of playa is 1414 m which is 2 m higher than the water surface of the cave (1412  m).  500 m3 water is daily pumped out without any change in water level. Since there is no any other water flowing to the cave, therefore, the playa is supplying the cave water system. The ecosystem  of the cave and playa are tight  together and any change in one will affect the other.  To protect its water quality from contamination, access to this  small scale cave must be restricted except for scientific research.}, keywords = {Cave,Yarimghayeh cave,Cave investigation,playa,Maku}, title_fa = {غار یاریم قیه ماکو(بررسی و شناخت)}, abstract_fa = {     غار آبی یاریم قیه در نقطه صفر مرزی ایران و ترکیه دارای آب زلال و کاملاً شفاف است. بارندگی میانگین ناحیه 250 میلی‌متر در سال و با دمای میانگین سالانهC° 9 در اقلیم نیمه خشک قرار دارد. دمای أب درون  غارC° 5/9 درجه و دمای درون آنC° 9 است. دوره یخبندان از آبان تا فروردین و طول روزهای یخبندان 108 روز در سال است. سنگهای در برگیرنده آن الیگوسن - میوسن اما خود غار بسیار جوان ودر مراحل ابتدایی تشکیل خود می‌باشد. غار با حجم 9600 متر مکعب از دو بخش خشک با مساحت 631 متر مربع و بخش آبدار با حجم 4700 متر مکعب و ژرفای 4 تا 6 مترتشکیل شده است.  ساختار غار شامل یک فروچاله در سطح بالایی و ساختار گسلی در داخل است. ارتفاع سقف آن 10 متر اما در بعضی نقاط دراثر سقوط دارای چندین متر افتادگی است. آزمایش  میکروبی و شیمیایی نشان می‌دهد که آب غار عاری از هر نوع آلودگی میکروبی بوده و قابل شرب است. pH  آب آن 36/7 و فلوئور آن در مقایسه با فلوئور بالا درآبهای این ناحیه که تا ( (ppm 5/4 اندازه‌گیری شده، (ppm)  7/1 است که در دامنه مجاز برای شرب قرار می‌گیرد.       در مجاورت غار، تالاب یاریم قیه با وسعتی حدود 5 کیلومتر مترمربع در خاور غار واقع شده است. ارتفاع سطح آب آن 1414 متر ودر مقایسه با ارتفاع1410 متری سطح آب داخل غار 2 متر بالاتر است. اگر چه در شبانه روز 500 متر مکعب آب از غار برداشت می‌گردد اما این برداشت، تغییری در ارتفاع سطح آب غار ایجاد نمی کند. ترازیابی ارتفاع آب غار و تالاب نشان می‌دهد که گرادیان هیدرولیکی آب از تالاب به طرف غار است و با توجه به اینکه هیچ آب دیگری به غار وارد نمی‌شود لذا غار به طور دائم و مستقیم از تالاب تغذیه می‌شود. غار یاریم قیه فاقد جلوه های زیبای معمول در غارهای با کاربری گردشگری است. لذا برای حفظ کیفیت آب غار از هر نوع آلودگی زیست محیطی و ثابت نگهداشتن رابطه اکوسیستم غار و تالاب بر اساس رده بندیهای استاندارد، باید دسترسی به آن جز در موارد علمی و بازدیدهای ویژه محدود گردد.}, keywords_fa = {غار,غار یاریم قیه,شناسایی غار,تالاب یاریم قیه,ماکو}, url = {http://www.gsjournal.ir/article_57633.html}, eprint = {http://www.gsjournal.ir/article_57633_951292823bdcf8394337dab3e71624fd.pdf} } @article { author = {Mohammadzadeh, M. J. and Aghababaei, H. and Naseri, A.}, title = {Application of Neural Network in Estimating Total Organic Carbon, Binak Oil Field, Bushehr Province}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {60-67}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57635}, abstract = {     The amount of total organic carbon (TOC) is one of the most important parameter in evaluating hydrocarbon source rock. This parameter is not only used for hydrocarbon geochemical studies but also plays an important role in evaluating the extension of hydrocarbon source rock. As the increase in TOC may indicate the presence of source rock, the depletion of TOC reveals no extension of source rock in a certain depth. Therefore the need for a powerful tool in this aspect is essential. One of the linear methods for solving such problem is artificial neural network, a biologically inspired computing method which has an ability to learn; self adjusted and are trained, capable of classification, image processing and different problem analysis, with an attempt to estimate. This paper presents the features and framework for application of neural network in estimating TOC for hydrocarbon source rock in Binak oil field, Bushehr province, using well log data. The results of this study reveal that Multi-Layer Perception (MLP) is the optimum network which was used for TOC estimation. MLP topology was a hidden layer with 6 nodes, back propagation momentum learning algorithm and tangent activation function. After training is completed, the estimated error calculated as 0.0013, and then the network performance was tested upon training and testing data. Ultimately the predicted TOC values were compared with the actual one which showed a reliable network performance (R=0.9956). Finally the sensitivity analysis was attempted on effective parameters and based on neutron porosity parameter (NPHI) found to be as the most sensitive, and the sonic travel time (DT), the least sensitive parameters in estimating TOC.  }, keywords = {TOC estimation,Neural Network,Hydrocarbon source rock,Organic material,Binak}, title_fa = {برآورد مقدارکربن آلی کل با استفاده ازشبکه عصبی مصنوعی در میدان نفتی بینک، استان بوشهر}, abstract_fa = {     مقدار کربن آلی کل (Total Organic Carbon) موجود در سنگ منشأ هیدروکربن یکی از پارامترهای حائز اهمیت  در ارزیابی آن است. این پارامتر نه تنها در مطالعات ژئوشیمیایی هیدروکربن مورد استفاده قرار می‌گیرد، بلکه در بررسی میزان گسترش سنگ منشأ نیز نقش بسزایی دارد به گونه‌ای که با افزایش TOC، احتمال حضور سنگ منشأ افزایش می‌یابد وکاهش آن بیانگر عدم گستردگی سنگ منشأ در یک ژرفای معلوم است. بنابراین وجود روشی که بتواند به برآورد هر چه بهتر آن کمک کند، لازم است. شبکه‌های عصبی مصنوعی یکی از روشهای عددی حل مسئله است که با الگو برداری از عملکرد شبکه‌های عصبی زیست‌شناختی به تحلیل مسائل پرداخته و اقدام به برآورد، رده‌بندی و ... می‌کند.      این مقاله با هدف معرفی ساختار و چگونگی عملکرد شبکه‌های عصبی، اقدام به برآورد مقدار مواد آلی کل موجود در سنگ منشأ هیدروکربن در میدان نفتی بینک با استفاده از اطلاعات چاه‌پیمایی می‌کند. نتایج حاصل، بیانگر این مطلب است که شبکه پرسپترون چند لایه( Multi-Layer Perceptron ) بهترین شبکه‌ای بود که برای برآورد استفاده شد که دارای یک لایه میانی با 6 گره ونوع الگوریتم آموزشی پس انتشار مومنتم باتابع تحریک تانژانتی بود. پس از آموزش شبکه، مقدار خطای برآورد 0013/0 حاصل شد. پس ازآن، داده‌های آموزشی و غیر آموزشی آزموده شدند و در نهایت مقایسة بین مقادیرTOC واقعی و برآورد انجام گردید که نتیجة مطلوب حاصل شد. در پایان، تحلیل حساسیت روی پارامترهای مؤثر در بر آورد انجام گردید و بر اساس آن، پارامتر تخلخل نوترونی (NPHI) به عنوان موثرترین و حساس‌‌ترین پارامتر و DT به عنوان پارامتری با کمترین حساسیت مؤثر در برآورد شناخته شدند.}, keywords_fa = {برآورد TOC,شبکه‌های عصبی,سنگ منشأ هیدوکربن,مواد آلی,بینک}, url = {http://www.gsjournal.ir/article_57635.html}, eprint = {http://www.gsjournal.ir/article_57635_b53765422970950e26995607776edd9d.pdf} } @article { author = {Salari Rad, M. and Irannejad, M. and Mohammadi, M.A.}, title = {Comparison of Economics of Cementation and Solvent Extraction for Recovery of Copper from Tarom Sofla Oxidized Copper Leach Solutions}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {68-73}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57636}, abstract = {        The Tarom Sofla copper ore zone includes several oxidized copper ore deposits, the most famous being Cheeseh, Aghdarreh and Yamaghan deposits. In view of the diversity of  reserves and productivity of ore deposits in the area, two production capacities ( high : 2000 tpd and low : 90 tpd) , two leaching processes and two methods of recovery were considered to compare the economics of cementation vs. solvent extraction for recovering copper from leach solutions of these ores. Taking all the three parameters (production capacity, leaching processes and methods of recovery) into consideration eight alternatives were evaluated. Capital costs were estimated by employing order of magnitude calculations while operating costs were estimated by scaling up lab- scale costs. Economic comparison was made by the NPV method. The results showed that the NPV of the high capacity model was higher than the low capacity model while vat leaching has a lower NPV than agitation leaching. Similarly it was shown that cementation for the low capacity model has a higher NPV than solvent extraction while for the high capacity model the order is reversed. Hence it is concluded that for capacities less than or equal to 90 tpd cementation is the economically preferable method for recovering copper from leach solutions but for capacities greater than  or equal to 2000 tpd solvent extraction is the better option.}, keywords = {Tarom Sofla copper ore zone,Oxidized copper ores,Recovery of solution,Economic comparison,Cementation,Solvent extraction}, title_fa = {مقایسه اقتصادی دو روش سمنتاسیون و استخراج حلالی برای بازیابی مس از محلول فروشویی شده (لیچ) کانسارهای اکسیده مس طارم سفلی}, abstract_fa = {       کانسارهای مس طارم سفلی از مجموعه کانسارهایی است که در زون طارم قرار دارد و شامل چندین کانسار مس اکسیده بوده که از معروف‌ترین آنها می‌توان به سه کانسار چیذه، آقدره و یمقان اشاره کرد. در این مقاله به مقایسه اقتصادی دو روش سمنتاسیون و استخراج حلالی برای بازیابی مس از محلول فروشویی شده این کانســــارها پرداخته شده است. برای ارزیابی اقتصادی، به علت گوناگونی کانســــارها از نظر میزان ذخیره و ظرفیت تولید، دو ظرفیت تولید (ظرفیت بالا: 2000 تن ظرفیت پایین: 90 تن کانسنگ در روز) دو روش فروشویی (لیچینگ) و دو روش بازیابی در نظر گرفته شــد. با در نظر گرفتن این سه عملیات (ظرفیت تولید، روش فروشویی و روش بازیابی) در مجموع 8 گزینه ارزیابی شد. هزینه‌های سرمایه‌ای با استفاده از روشهای مرتبه بزرگی(قانون شش دهم) و هزینه عملیاتی با توجه به نتایج آزمایشها برآورد شد. برای مقایسه اقتصادی از روش NPV (ارزش فعلی خالص) استفاده شد. نتایج ارزیابی نشان داد که ارزش فعلی خالص گزینه ظرفیت بالا، بیش از ظرفیت پایین و ارزش فعلی خالص گزینه‌های فروشویی همزنی بیشتر از فروشویی حوضچه‌ای است. همچنین مشخص شد که ارزش فعلی خالص سمنتاسیون در ظرفیت پایین بیشتر از استخراج حلالی بوده در حالی که در ظرفیت بالا، عکس این مطلب صادق است. بنابراین، برای ظرفیتهای کوچک‌تر یا مساوی 90 تن کانسنگ در روز، روش ارجح بازیابی از محلول از نظر اقتصادی، سمنتاسیون است ولی برای ظرفیتهای بزرگ‌تر یا مساوی 2000 تن کانسنگ در روز روش استخراج حلالی مناسب است.}, keywords_fa = {کانسار مس طارم سفلی,کانسارهای اکسیده مس,بازیابی از محلول,مقایسه اقتصادی,سمنتاسیون,استخراج حلالی}, url = {http://www.gsjournal.ir/article_57636.html}, eprint = {http://www.gsjournal.ir/article_57636_bc5a1fac28055250d51c33be931a9799.pdf} } @article { author = {Goshtasbi, K. and Ahmadi, M. and Naeimi, Y.}, title = {An Efficient Search Method for Finding the Critical Slip Surface using the Compositional Mont Carlo Technique}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {74-85}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57638}, abstract = {Locating the critical slip surface and the associated minimum factor of safety are two complementary parts in a slope stability analysis. A large number of computer programs exist to solve slope stability problems. Most of these programs, however, have used inefficient and unreliable search procedures to locate the global minimum factor of safety. This paper presents an efficient and reliable method to determine the global minimum factor of safety coupled with a modified version of the Monte Carlo technique. Examples are presented to illustrate the reliability of the proposed method.  }, keywords = {Factor of safety,Method of search,Critical slip surface,Monte Carlo}, title_fa = {استفاده از روش مونت‌کارلو ترکیبی برای یافتن سطح بحرانی شکست در شیروانیها}, abstract_fa = {موقعیت سطح بحرانی شکست و ضریب اطمینان کمینه مربوط به آن، دو جزء مکمل در تحلیل پایداری شیروانیهای خاکی هستند. برای یافتن سطح بحرانی شکست، اغلب از روشهای جستجوی مختلفی مانند جستجوی شبکه‌ای استفاده می‌شود که بدین منظور نرم افزارهای رایانه‌ای متعددی تا کنون تهیه شده و در بیشتر این نرم افزارها، از روشهای جستجوی بی‌اعتبار و غیرقابل اطمینان استفاده شده است. در این مقاله، از روش مونت‌کارلو که روشی مؤثر و معتبر است، استفاده می‌شود و در نهایت اعتبار این روش مورد بررسی قرار گرفته است.}, keywords_fa = {ضریب اطمینان,روش جستجو,سطح بحرانی شکست,مونت کارلو}, url = {http://www.gsjournal.ir/article_57638.html}, eprint = {http://www.gsjournal.ir/article_57638_f626b7949e2c364a169fd38645863ab6.pdf} } @article { author = {Talkhablou, M. and Hafezimoghaddas, N. and Nikodel, M. and Uromeihy, A. and shafiefar, M.}, title = {Evaluation the Engineering Properties of Rocks and Suggesting a Criterion to Select Rock Material for Construction of Rubble Mound Breakwaters in Southern Coast of Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {86-107}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57641}, abstract = {       Rocks are natural materials used in a variety of coastal protection structures, especially in rubble mound breakwaters. Engineering properties of rocks, such as durability and resistance to degradation factors of the marine environments are important properties which construction material of marine structures should behave. Rock durability is a function of rock properties and condition of environment in which the rock will be used. Regarding the economical importance of constructed coastal ports and facilities in coast lines of south Iran, it is necessary to evaluate the engineering properties of rocky construction materials in such structures from durability and degradation point of view. In this study, by investigating and sampling the used rock material in 27 constructed rubble mound breakwaters along the 1000 km south Iran's coastlines, from Amery Port in western part to Pasabandar Port in 85 km east Chabahar, and regarding the observations that collected in field visual investigations and engineering tests of durability examination, the experimental relationship between physical, mechanical and durability parameter of studied rocks have been concluded and consequently criterion to select the suitable rock of three groups of rocks limestone, igneous rock and bioclastic sedimentary rock (lomashell) have been presented individually.}, keywords = {engineering properties of rock,rubble mound breakwater,Durability,southern coasts of Iran}, title_fa = {ارزیابی ویژگیهای مهندسی سنگها و پیشنهاد معیار انتخاب مصالح سنگی برای احداث موج‌شکنهای توده‌سنگی در سواحل جنوبی ایران}, abstract_fa = {مصالح سنگی، از جمله مصالح طبیعی هستند که در ساخت انواع سازه‌های حفاظتی سواحل، بویژه موج‌شکنهای توده‌سنگی به کار می‌روند. ویژگیهای مهندسی سنگها، از جمله دوام و مقاومت آن در برابر عوامل مخرب و مهاجم حاکم بر محیطهای دریایی، از مهم‌‌ترین ویژگیهایی است که مصالح مورد استفاده در ساخت سازه‌های دریایی باید از آن برخوردار باشند. دوام، تابعی از ویژگیهای سنگ و محیط یا شرایطی است که در آن قرار می‌گیرد. ضرورت ارزیابی ویژگیهای مهندسی مصالح سنگی مصرفی در این سازه‌ها از دیدگاه دوام و زوال‌پذیری با توجه به اهمیت اقتصادی و گاه نظامی بنادر و تسهیلات ساحلی احداث شده در نوار ساحلی جنوب ایران مشخص می‌شود. در این مقاله، ضمن بررسی مصالح سنگی مصرفی و گرفتن بیش از 800 نمونه از این مصالح از حدود 27 موج‌شکن توده‌سنگی احداث شده در طول حدود 1000 کیلومتر از سواحل جنوب کشور، از بندر عامری تا چابهار، و توجه به نتایج حاصل از بررسیهای مشاهده‌ای و انجام آزمایشهای مهندسی سنجش دوام، روابط تجربی از برقراری ارتباط بین پارامترهای فیزیکی، مقاومتی و دوام‌داری سنگها استخراج شده و در پایان معیارهای انتخاب سنگ برای سه گروه سنگهای آهکی، آذرین و سنگهای زیستی تخریبی(صدف‌سنگها) به طور مجزا پیشنهاد شده است.  }, keywords_fa = {ویژگیهای مهندسی سنگها,موج‌شکن توده‌سنگی,دوام‌داری,سواحل جنوب ایران}, url = {http://www.gsjournal.ir/article_57641.html}, eprint = {http://www.gsjournal.ir/article_57641_c7db671f58704ea53a426849b929cbd6.pdf} } @article { author = {Hashemi, N. and Darvish, J.}, title = {The Identification of a New Mammal Fossils Fauna in Pleistocene Sediments of Eastern Iran and it,s Comparison to Maragha Fauna, with Special Reference to Paleoenvironment}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {108-115}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57643}, abstract = {The Pleistocene sediments in the east of Iran belong mostly to extinct herbivores of Order Pressiodactyle and Arssiodactyle. The tooth remains of Equidae from Pressiodactyle, bones and tooth remains of domestic and wild herbivores such as Rhinoceros that some of which are extinct today have been found. The existence of Rhinoceros teeth in the study area, Maragheh sediments, Linxin basin in China and other areas indicate that after the extinction of fauna in Maragheh, a similar fauna was formed and the climate in the Late Cenozoic in Mediterranean basin, Western and Central Eurasia were warm and humid.}, keywords = {Pleistocene,Pressiodactyle,Arssiodactyle,Maragheh fauna}, title_fa = {شناسایی مجموعه جدیدی از پستانداران فسیل در رسوبات پلیستوسن خاور ایران و مقایسه آن با زیای مراغه, با نگرشی بر محیط دیرینه}, abstract_fa = {مطالعات انجام شده در رسوبات پلیستوسن خاور ایران، منجر به کشف و شناسایی مجموعه‌ای از بقایایی استخوانی شده که عمدتاً متعلق به علفخواران منقرض شده از راسته فردسمان و زوج‌سمان بوده‌اند. از فردسمان، بقایای دندانی اسبها و از زوج سمان، بقایای استخوانی و دندانی انواع گیاهخواران اهلی و وحشی، کرگدن، گراز و جانورانی یافت شده است که بعضی از آنها امروزه به کلی از بین رفته‌اند. وجود دندان رینوسروسها در ناحیه مورد مطالعه، رسوبات مراغه، حوضه Linxia در چین و سایر نواحی  نشان می‌دهد که پس از انقراض زیای مراغه، مجموعه مشابهی در خاور ایران استقرار یافته و شرایط اقلیمی اواخر سنوزوییک در حوضه مدیترانه، باختر و مرکز اوراسیا گرم و مرطوب بوده است.}, keywords_fa = {پلیستوسن,فردسمان,زوج‌سمان,زیای مراغه}, url = {http://www.gsjournal.ir/article_57643.html}, eprint = {http://www.gsjournal.ir/article_57643_4a5781431a2cc4e78352df1ec62fd783.pdf} } @article { author = {Mohajjel, M. and Izadi kian, L.}, title = {Poly-deformed Tectonites in Dome Structure of the Almabolagh Region, West of Hamadan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {116-133}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57652}, abstract = {      Almabolagh region is located in northwestern part of the Sanandaj-Sirjan zone of Zagros orogen in western Iran. This area is located 15 km to the west of Hamadan. Three rock units consisting of volcani-sediments (Almabolagh sequence) at the lower part, carbonate (Chenarsheikh sequence) in the middle, and slate (Hamadan slate) at the upper part are identified. These rocks that are metamorphosed at green schist facies have been exposed in a dome structure. Four stages of deformation (D1, ..., D4) are identified in the tectonites. D1 structures include first generation folds and related axial planar schistosity. D2 structures are recognized by tight to isoclinal, recumbent shallowly plunging folds, with horizontal to sub-horizontal axial plane schistosity which is the predominant foliation in this area. The mechanism of folding in this stage is flexural shearing and passive flow. D3 structures are identified by the third generation foliation that is weakly developed parallel to the axial surface of related upright, open to gentle folds. The third generation folds were produced by flexural slip mechanism. A dome structure generated by intrusion of magmatic batholith in this region and structural elements of the main deformation stages (D2) were rotated.}, keywords = {Refolding,Tectonite,Dome structure,Almabolagh of Hamadan,Sanandaj-Sirjan zone}, title_fa = {چین‌خوردگیهای چند مرحله‌ای و ساز و کار تشکیل آنها در تکتونیتهای موجود در ساختار گنبدی منطقه آلمابولاغ (باختر همدان)}, abstract_fa = {منطقه آلمابولاغ در بخش شمال باختری پهنه سنندج سیرجان و در15 کیلومتری باختر همدان قرار دارد. در این منطقه، سه واحد اصلی سنگ‌چینه‌ای شناسایی شده است: واحد رسوبی- آتشفشانی آلمابولاغ در زیر، واحد کربناتی چنار شیخ در بخش میانی و اسلیتهای همدان در بخش بالایی. این مجموعه که در رخساره شیست سبز دگرگون شده، در یک ساختار گنبدی بزرگ قرار می‌گیرد. در این تکتونیتها، چهار مرحله دگرشکلی شناسایی گردید که سه مرحله آن با تشکیل چینها همراه بوده است ولی دگرشکلی مرحله چهارم با عملکرد گسلها شناخته می‌شود که ساختار چینها را قطع کرده است. آثار دگرشکلی اول،  با تشکیل چینهای نسل اول و همچنین برگوارگی مرتبط با آن شناخته شده است. دگرشکلی دوم با چین دادن سطح محوری چینهای نسل اول و برگوارگی موازی با آن شکل گرفته است. این چینها به‌صورت یال موازی و تنگ با سطح محوری خوابیده تا مایل و محور تقریباً افقی به همراه برگوارگی نسل دوم به صورت برگوارگی موازی سطح محوری شکل گرفته‌اند. شــــواهد چین‌خوردگی در نسل دوم، ساز و کار چین‌خوردگی را خمش-جریان (flexural flow) و جریان غیر فعال Passive flow)) تأیید می‌کند. عملکرد دگرشکلی سوم در منطقه باعث چین خوردن برگوارگی نسل دوم وتشکیل چینهای نسل سوم به صورت باز  با سطح محــــــوری تقریباً قائم و محور افقی وتشکیل برگواره سوم از نوع برگوارگی کنکره‌ای شـــــده است. ساز و کار تشکیــــل این چینها بیشتـــــــر خمشی- لغزشی(flexural slip) است. هندسه عوامل ساختاری مرحله غالب (مرحله دوم) در ساختار گنبدی منطقه آلمابولاغ نقش توده نفوذی را در این هندسه با چرخش آنها در چهارچوب یک ساختار گنبدی نشان می‌دهد.  }, keywords_fa = {چین‌خوردگی مکرر,تکتونیت,ساختار گنبدی,آلمابولاغ همدان,پهنه سنندج- سیرجان}, url = {http://www.gsjournal.ir/article_57652.html}, eprint = {http://www.gsjournal.ir/article_57652_7f452dd7741782adefd0ccafb954ec41.pdf} } @article { author = {Sadeghian, M. and Valizadeh, M. V.}, title = {Emplacement Mechanism of Zahedan Granitoidic Plutonwith the Aid of AMS Method}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {134-159}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57653}, abstract = {     Zahedan granitoidic pluton  with general NW-SE elongation is located in the middle part of  the Zahedan-Saravan granitoidic belt. It includes granites, granodiorites and diorites and it is also cut by numerous of andesitic to dacitic dikes. The regional metamorphic rocks of the area, with the age of Eocene, have been intruded by this pluton. In this research, emplacement mechanism of the northern part of Zahedan pluton has been studied with the aid of anisotropy of magnetic susceptibility (AMS) method. The results show that granitic rocks of the Zahedan pluton belong to paramagenitic granites (µSI) while diorites and granodiorites belong to ferromagentic granites (µSI). The magnetic lineations and foliations of the pluton mainly have low dip or sub-horizontal. In contrast, dioritic rocks which cover a small area, have magnetic lineations and foliations with high dip (sub-vertical). Therefore, dioritic rocks are considered as the feeder zone or the ascent location of the magma for this part of the Zahedan granitoidic pluton. Very low dip magnetic lineations and foliations suggest that Zahedan granitoidic pluton has been emplaced as sill. The activity of a very low dip simple shear movement has an important role in preparing a suitable space for emplacement of this granitoidic pluton.  }, keywords = {Emplacement mechanism,Granitoidic pluton,Zahedan,Anisotropy of Magnetic Susceptibility,Magnetic lineations and foliations,Feeder zone}, title_fa = {ساز و کار جایگیری توده گرانیتوییدی زاهدان در پرتو روش AMS}, abstract_fa = {توده گرانیتوییدی زاهدان(با وسعت 750) با روند کلی NW-SE  در بخش میانی نوار گرانیتوییدی زاهدان ـ سراوان واقع است. این توده، سنگهایی با ترکیب گرانیت، گرانودیوریت و دیوریت را در بر ‌دارد و همچنین توسط تعداد زیادی دایک با ترکیب آندزیتی ­-  داسیتی قطع شده‌است. سنگهای دگرگونی ناحیه‌ای با سن ائوسن میانی، توسط این توده قطع شده‌اند. در این تحقیق، ساز وکار جایگزینی بخش شمالی توده زاهدان در پرتو روش ناهمسانگردی خودپذیری مغناطیسی(AMS) مورد مطالعه قرار گرفته است. نتایج به‌دست آمده نشان می­دهد که گرانیتهای توده زاهدان از نوع پارا مغناطیسی (با خودپذیری  مغناطیسی کمتر از µSI500) هستند در حالی­ که گرانودیوریتها و دیوریتها از نوع فرو مغناطیسی (با خودپذیری  مغناطیسی بیش از µSI500) هستند. خطوارگیها و برگوارگیهای مغناطیسی این توده نفوذی، کم شیب کم و نزدیک به افقی است. سنگهای دیوریتی که محدودة کم وسعتی را  به خود اختصاص می‌دهند‌، دارای خطوارگیها و برگوارگیهای مغناطیسی با شیب زیاد و نزدیک به قائم هستند، از این رو به عنوان زون تغذیه کننده یا محل صعود ماگمای تغذیه کننده این بخش از تودة گرانیتوییدی زاهدان در نظر گرفته شده‌اند. خطوارگیها و برگوارگیهای مغناطیسی بسیار کم شیب، گویای آن است که توده گرانیتوییدی زاهدان به صورت یک سیل جایگزین شده­­است. عملکرد یک حرکت برشی کم شیب در به وجود آمدن فضای مناسب برای جایگزینی این توده گرانیتوییدی نقش بسزایی داشته است.}, keywords_fa = {ساز وکار جایگیری,توده گرانیتوییدی,زاهدان,ناهمسانگردی خودپذیری مغناطیسی,خطوارگیها و برگوارگیهای مغناطیسی,زون تغذیه کننده}, url = {http://www.gsjournal.ir/article_57653.html}, eprint = {http://www.gsjournal.ir/article_57653_95211756fd2e788a85fb7c2af38f95eb.pdf} } @article { author = {Ghazipour, N. and Uromeihy, A. and Entezam, I. and Ansari, F. and Pirouz, M.}, title = {ٍThe use of Cone-Fall Theory for Evaluation of Rock-Fall Hazard along the Chaloos-Road(Pol-e-Zanguleh – Marzan-Abad)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {160-169}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57654}, abstract = {       Karaj-Chaloos Road is always considered as the most hazardous road due to rockfalls and landslide events. The road, located in the CentralAlborzMountains, is a vital route connecting Tehran and the southern part of Alborz to the northern part and the resort areas along the Caspian Sea. The aim of this paper is to study and evaluate the potential of rockfalls and landslides along the middle part of the route. The study area has a very complicated geological and geomorphological condition and many deep cuts were made along the road to provide a safe passage through the mountains. Since most of the slope instabilities along the road are of rockfall type, cone-fall theory proposed by Evans and Hungr (1993) was used to analyze and predict the rockfalls along the route. The results show that the potential of rockfall is directly related to morphology and higher for steeper slopes. Rock type and the geological structures of the slopes also influence the rockfall potential in the study area.}, keywords = {Rockfall,Cone-fall theory,Rockfall potential,Chaloos-road,Slope instability}, title_fa = {استفاده از نظریه مخروط افت در ارزیابی خطر سنگ‌ریزش در مسیر جاده چالوس (پل زنگوله ـ مرزن آباد)}, abstract_fa = {ناپایداری دامنه‌ها و ریزشهای سنگی همواره از خطرات اصلی در مسیر جاده‌ها در مناطق کوهستانی بوده و جاده کرج- چالوس از این خطر مستثنی نیست. به منظور ارزیابی خطر سنگ‌ریزش در مسیر راهها، روشهای متعددی وجود دارد که در این تحقیق از روش محاسبه مخروط افت استفاده شده است. در این روش، متناسب با ابعاد هندسی و شیب دامنه، نحوه حرکت سنگ‌ریزش و میزان گسترش و پراکندگی آنها در طول دامنه و در نهایت تأثیری که روی مسیر راه می‌گذارد، بررسی می‌شود. با استفاده از داده‌های رقومی و با بهره‌گیری از نرم افزارهای تخصصی، مناطق مستعد سنگ‌ریزش در طول مسیر راه شناسایی شدند. خطر سنگ‌ریزش برای شیب دامنه‌ها و برای دو زاویه بحرانی محاسبه شده و نتایج به صورت نقشه‌های پهنه‌های خطر سنگ‌ریزش ارائه شد. نتایج به دست آمده نشان می‌دهد که خطر سنگ‌ریزش رابطه مستقیمی با شیب دامنه‌های سنگی و شرایط توپوگرافی آن دارد. همچنین نوع سنگ در گسترش و شکل‌گیری جابه‌جایی سنگ‌ریزشها نقش مهمی ایفا می‌کند.  }, keywords_fa = {سنگ‌ریزش,نظریه مخروط افت,استعداد سنگ‌ریزش,جاده چالوس,ناپایداری دامنه‌ای}, url = {http://www.gsjournal.ir/article_57654.html}, eprint = {http://www.gsjournal.ir/article_57654_c96d8f49573d8551e2ba37c9da46b5fc.pdf} } @article { author = {Fattahi, H. and Valadan Zouj, M. J. and Mobasheri, M. R. and Dehghani, M.}, title = {Noise Reduction of the Radar Interferometric Phase Used for Surface Displacement Measurement Based on Wavelet Transform in the Complex Domain}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {170-181}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57655}, abstract = {      Interferometric Synthetic Aperture Radar (InSAR) technique using phase information has demonstrated its abilities in topographic mapping and measuring surface deformation with the precision of meter and sub-centimeter, respectively in a very high spatial resolution. However, various limiting factors such as spatial and temporal decorrelation, atmospheric effects and thermal noise of the radar sensor introduce different types of noise into the interferograms, which makes the phase unwrapping too difficult to obtain the accurate results. In this study, an algorithm for noise suppression is presented based on wavelet transform in the complex domain. The high-frequency data due to the phase jumps is not appeared in the complex domain. Therefore, the wavelet coefficients obtained in the complex domain include mostly the noise. The wavelet coefficients of the noisy interferogram are then filtered using the threshold computed from the related wavelet band. In comparison with the other noise reduction methods such as multi-look processing and those based on Fourier transform in small windows, the proposed algorithm can reduce the noise while keeping the spatial resolution without the need for windowing the interferogram. Quantitative and qualitative evaluations of the results obtained by the new method applied on the simulated and real noisy data show high performance of the wavelet transform in noise reduction.}, keywords = {InSAR,Interferogram,Complex Domain,Noise Reduction,wavelet transform}, title_fa = {ارائه الگوریتمی برای کاهش نوفه فاز تداخل‌سنجی راداری مورد استفاده در تعیین میزان جابه‌جاییهای پوسته زمین، بر اساس تبدیل موجک در حوزه مختلط}, abstract_fa = {     روش تداخل‌سنجی راداری با بهره‌گیری از اطلاعات فاز تصاویر مختلط SAR،  توانایی بالایی در تهیه مدل ارتفاعی زمین با دقت متر و اندازه‌گیری جابه‌جاییها و تغییرشکلهای پوسته زمین با دقت زیر سانتی‌متر در پوششی پیوسته و وسیع دارد. عوامل محدودکننده مختلفی چون عدم همبستگی هندسی و زمانی، تغییرات جوی و نوفه گرمایی سنجنده راداری موجب ایجاد نوفه در اینترفروگرام و ایجاد مشکل در عملیات بازیابی فاز و کاهش دقت نتایج می‌شود. در این پژوهش، از تبدیل موجک در حوزه مختلط برای کاهش نوفه اینترفروگرام استفاده شده است. بر خلاف روشهای دیگر چون روش چندمنظره و تبدیل فوریه در پنجره‌های کوچک اینترفروگرام، روش پیشنهاد شده در این پژوهش، نوفه را باوجود حفظ قدرت تفکیک مکانی و بدون نیاز به پنجره‌ای کردن اینترفروگرام، کاهش می‌دهد. نتایج اعمال این فیلتر بر داده‌های شبیه‌سازی شده و واقعی و مقایسه آن با فیلترهای موجود، نشان‌دهنده توانایی بالای تبدیل موجک در کاهش نوفه اینترفروگرام است.}, keywords_fa = {تداخل‌سنجی راداری,اینترفروگرام,حوزه مختلط,کاهش نوفه,تبدیل موجک}, url = {http://www.gsjournal.ir/article_57655.html}, eprint = {http://www.gsjournal.ir/article_57655_d56d4db221ca38f39a62c3909132d4fd.pdf} } @article { author = {Sadeghi, Z. and Mehdizadeh, H. and Sadeghian, M.}, title = {Geochemistry and Petrogenesis of Kuh-Shah Granitoidic Pluton(NE Baft)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {17}, number = {66}, pages = {183-193}, year = {2008}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.57656}, abstract = {      Kuh- Shah granitoidic pluton is located in the NE part of 1:100000 geological map of Baft. Lithological composition of this pluton includes Alkali- feldspar granite, granite, granodiorite, quartzdiorite, diorite and gabbro. This pluton has been intruded in volcaniclastics  of Eocene age. On the variation diagrams the trends of major and trace elements of studied samples indicate the continuity of lithological compositional range of this pluton and they have been from differentiation of a basic (basaltic) magma. From the genetic classification point of view the studied granitoidic pluton is from I type granite and it belongs to magnetite series. Based on the geochemical features Kuh-Shah granitoidic pluton is metaluminous with high and medium potassic calc-alkaline nature. High amounts of LILE and low amount of HFSE on the spider diagrams show that the parental magma of these rocks have been enriched from trace elements and incompatible elements. Based on the tectonic setting discrimination diagrams, this pluton is belong to VAG type and therefore it has been resulted from subduction of neotethys oceanic crust beneath the central Iran continental crust.}, keywords = {Petrogenesis,Geochemistry,Granitoid rocks,Kuh- Shah,Baft,Iran}, title_fa = {ژئوشیمی و سنگ‌زایی توده گرانیتوییدی کوه شاه(شمال خاور بافت)}, abstract_fa = {توده گرانیتوییدی کوه شاه در شمال خاور نقشه زمین­شناسی 1:100000 بافت واقع است. این توده دارای ترکیب سنگ­شناسی آلکالی فلدسپار گرانیت، گرانیت، گرانودیوریت، کوارتزدیوریت، دیوریت و گابرو و در بین سنگهای آتشفشان تخریبی ائوسن تزریق شده است. در نمودارهای تغییرات، روندهای عناصر اصلی نمونه­های مورد مطالعه نشانگر پیوستگی طیف ترکیب سنگ‌شناسی توده گرانیتوییدی کوه‌شاه و تشکیل آن از راه تفریق یک ماگمای بازی (بازالتی) اولیه است. از نظر تقسیم‌بندیهای زایشی،  این توده گرانیتوییدی از نوع گرانیتوییدهای I و سری مگنتیت است. با توجه به ویژگیهای ژئوشیمیایی، این توده گرانیتوییدی دارای ماهیت متالومین و کلسیمی- قلیایی پتاسیم متوسط تا بالاست. نمودار­های بهنجار شده عناصرکمیاب و ناسازگار سنگهای سازنده این توده نسبت به کندریت و گوشته اولیه، غنی‌شدگی ماگمای سازنده آنها را از عناصر کمیاب سبک ناسازگار و تهی­شدگی از عناصر کمیاب سنگین نشان می­دهد. این ویژگی از خصوصیات بارز سنگهای کلسیمی- قلیایی کمان آتشفشانی زونهای فرورانش حاشیه قاره­ای است. با توجه به نمودارهای مختلف تمایز محیط زمین‌ساختی، این توده گرانیتوییدی از نوع  VAG(گرانیتهای کمان آتشفشانی) است و حاصل فرورانش صفحة اقیانوسی نوتتیس به زیر صفحه قاره‌ای ایران مرکزی است.}, keywords_fa = {سنگ‌زایی,ژئوشیمی,سنگهای گرانیتوییدی,کوه‌شاه,بافت,ایران}, url = {http://www.gsjournal.ir/article_57656.html}, eprint = {http://www.gsjournal.ir/article_57656_357b1d690823c743d6997c467ce2485e.pdf} }