@article { author = {Joudaki, V. and Koohiyan-Afzal, F. and Aalianvari, A. and Ajalloeian, R. and Sohrabi-Bidar, A.}, title = {Study of the surface dissolution forms and development of groundwater in the part 4 of Ghomroud tunnel site}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {26}, number = {103}, pages = {29-40}, year = {2017}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2017.46725}, abstract = {Part 4 of Ghomroud tunnel is located in the Sanandaj-Sirjan geological zone. In this area, due to the existence of numerous faults, crushed zones and significant development of major and minor catchments, the tunnel has been encountered with the risk of groundwater influx. On the other hand, due to some limitations such as thick(up to 600 meters in some localities)overburden over the tunnel and the lack of exploratory drilling down to the tunnel level, it has been difficult to forecast and estimate the groundwater flow in the tunnel route. Due to the existence of numerous faults in part 4 of the Ghomroud tunnel ,encountering of the drilling machine (Double Shield TBM) with high-pressure water could cause influx of large amounts of water into the tunnel and collapse of rock masses in the crushed zones. It hence could cause deviation of the machine and drilling stop. In this article, the lack of data from boreholes led us to try investigating the development of groundwater flow in the tunnel based on geomorphological evidence. Analytical modeling and geomorphological field survey in the area show a relative consistency between geomorphology and volume of water flowing in the tunnel excavation. Therefore, according to measurements conducted on the water entering the tunnel, about 80 liters per second of water flowed into the tunnel, which is in agreement with geomorphological studies. Results show that the study of morphology and surface features could provide useful information in order to identify more precisely the hydrogeologic conditions of the area.}, keywords = {Ghomroud Tunnel,TBM,geomorphology,Groundwater flow,Analytical modeling}, title_fa = {بررسی اشکال انحلالی سطحی و میزان توسعه آب زیرزمینی در ساختگاه قطعه 4 تونل قمرود}, abstract_fa = {قطعه 4 تونل قمرود در پهنه سنندج- سیرجان قرار گرفته است. در این محدوده به دلیل وجود گسل‌های فراوان، نواحی خرد ‌شده و همچنین گسترش قابل‌ توجه حوزه آبریز جریان‌‌های فرعی و اصلی در سطح زمین، تونل با خطر هجوم آب زیرزمینی روبه‎رو بوده است. از سوی دیگر به دلیل برخی محدودیت‎ها مانند روباره زیاد تونل (در برخی نقاط تا حدود 600 متر) و نبود امکان حفاری گمانه‎های اکتشافی تا تراز تونل، پیش‎بینی و برآورد جریان آب زیرزمینی در مسیر حفاری تونل به سختی امکان‌پذیر بوده است. با وجود گسل‎های بسیار در مسیر قطعه 4 تونل قمرود، برخورد دستگاه حفار تمام مقطع تلسکوپی (TBM Double Shield) با جریان‎های پرفشار، می‏توانست ضمن هجوم مقادیر بالایی از آب به درون تونل، سبب تشدید ریزش توده‏سنگ‎ها در پهنه‎های خرد شده و به دنبال آن توقف و انحراف دستگاه از مسیر صحیح حفاری شود. در این مقاله تلاش شده است تا با توجه به کمبود اطلاعات حاصل از گمانه‏ها و مطالعات زیرسطحی، میزان توسعه‌یافتگی جریان آب زیرزمینی در مسیر تونل بر پایه شواهد ژئومورفولوژی و عوارض سطحی منطقه، مورد بررسی قرار گیرد. مدل‌سازی‎های تحلیلی و پیمایش‎های صحرایی در منطقه نشان‎دهنده تطابق نسبی ژئومورفولوژی منطقه با حجم جریان آب در مسیر حفاری تونل است. بر این اساس با توجه به اندازه‎گیری‎های انجام شده در زمینه آب ورودی به تونل، حدود 80 لیتر بر ثانیه آب به این بخش از تونل وارد شده است که با بررسی‎های ژئومورفولوژیکی انجام شده، همخوانی دارد و نتایج نشان‌دهنده آن است که بررسی مورفولوژی و عوارض سطحی زمین، توانسته است در راستای شناخت دقیق‌تر شرایط هیدروژئولوژی منطقه، اطلاعات مفیدی ارائه دهد.}, keywords_fa = {تونل قمرود,TBM,ژئومورفولوژی,جریان آب زیرزمینی,مدل‌سازی تحلیلی}, url = {http://www.gsjournal.ir/article_46725.html}, eprint = {http://www.gsjournal.ir/article_46725_32c6e8bab44fb15502049a2901bdf109.pdf} }