@article { author = {Haghighi, E. and Alirezaei, S. and Ashrafpour, E.}, title = {Mineralization, Alteration and Ore Fluid Characteristics in Cheshmeh Hafez Base and Precious Metals Deposit, Torud-Chahshirin Range, North-Central Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {22}, number = {88}, pages = {99-110}, year = {2013}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2013.53682}, abstract = {The Cheshmeh Hafez deposit in Torud-Chahshirin Range, north-central Iran, consists of a polymetal vein mineralization in Cenozoic volcanic host rocks of dominantly basaltic andesite and dacite compositions. The main ore vein, 1800 m long and <1 – 5 m wide, occurs discontinuously in a north-south direction, and includes chalcedony, fine- to coarse-grained quartz, and jasperoid, associated with galena and subordinate chalcopyrite, sphalerite, bornite, pyrite, tetrahedrite, specular hematite and siderite. Crustiform bands, consisting of grey chalcedony, jasperoid, milky quartz, and various ore minerals are common, and breccias and comb textures are locally developed, in the vein. Supergene processes led to the replacement of galena by cerussite, and of hypogene copper minerals (chalcopyrite and bornite) by covellite and malachite. The main ore vein is accompanied by several smaller quartz and calcite veins in NE-SW and E-W directions, respectively, where the calcite veins are barren. Alteration related to mineralization is restricted to thin halos bordering the vein, and consists of quartz, chlorite, calcite, kaolinite and sericite (illite). Fluid inclusions in quartz associated with ore minerals are studied. Most inclusions are two-phase, liquid-rich, at room temperatures; few are vapor-dominant, and few consist solely of liquid. Primary fluid inclusions display low to moderate homogenization temperatures (135-285) and salinities (1-13 wt% NaCl equivalents). The δ34S values for the ore fluids in equilibrium with the sulfide minerals fall in the range -1.6 to +4.1‰ and suggest a magmatic source for sulfur. The ore and gangue mineralogy, and the alteration assemblages, suggest that the ore fluids were reduced and near-neutral in nature. This, combined with the metal contents, Ag/Au ratio between 16 to 25, iron- poor sphalerite, the crustiform and colloform textures, and the Th and salinity values, imply that mineralization at Cheshmeh Hafez is of epithermal, intermediate- sulfidation, character. The alteration assemblage at Cheshmeh Hafez is indicative of a sub-type of intermediate- sulfidation epithermal deposits with a tendency towards low-sulfidation type}, keywords = {Cheshmeh Hafez,Torud-Chahshirin,Fluid inclusion,Sulfur Isotope,Epithermal,Intermediate sulfidation}, title_fa = {کانه‌زایی، دگرسانی و ویژگی‌های سیال‌کانه‌زا در کانسار فلزات پایه و گرانبهای چشمه‌حافظ، رشته‌کوه ترود- چاه‌‌شیرین، شمال ایران مرکزی}, abstract_fa = {کانسار چشمه‌حافظ در بخش مرکزی رشته‌کوه ترود- چاه‎‌شیرین در جنوب محور شاهرود- دامغان قرار دارد. این کانسار شامل کانی‌سازی رگه‌ای چندفلزی (Pb-Cu-Zn-Au-Ag) در سنگ‌های میزبان آتشفشانی سنوزوییک با ترکیب چیره‌آندزیت بازالتی و داسیت است. رگه کانه‌دار اصلی، به طول نزدیک به 1800 متر و ستبرای کمتر از یک متر تا 5 متر، به صورت ناپیوسته در راستای عمومی شمالی- جنوبی رخ داده و شامل کالسدونی، کوارتز دانه‌ریز تا دانه‌درشت و ژاسپرویید، همراه با کانه‌های گالن (فاز فلزی چیره)، کالکوپیریت، بورنیت، اسفالریت، پیریت، تتراهدریت، هماتیت (اسپکولاریت) و سیدریت است. فرایندهای برون‌زاد (سوپرژن) سبب تبدیل گالن به سروزیت و تغییر کانی‌های درون‌زاد (هیپوژن) مس (کالکوپیریت و بورنیت) به کوولیت و مالاکیت شده است. در بخش‌های مختلف رگه اصلی، نوارهای قشرگون با پهنای کمتر از یک میلی‌متر تا 10 میلی‌متر دیده می‌شود که از کالسدونی به رنگ‌خاکستری، ژاسپرویید، کوارتز شیری و کانی‌های فلزی تشکیل شده است. آثار برشی‌شدن و بافت شانه‌ای نیز به طور محلی در این رگه دیده می‌شود. افزون بر رگه اصلی، چند رگه فرعی کوارتز و کلسیت به ترتیب با راستای شما‌ل‌خاوری- جنوب‌باختری و خاوری- باختری وجود دارد که رگه‌های کلسیت کانه‌زایی ندارند. در رگه اصلی، دگرسانی مرتبط با کانی‌سازی محدود به هاله‌های باریکی در دو سوی رگه، و شامل کوارتز، کلریت، کلسیت، کائولینیت و سریسیت (ایلیت) است. میانبارهای سیال در نمونه‌های کوارتز همراه با کانی‌های فلزی مطالعه شده است. بیشتر میانبارهای سیال، در دمای اتاق، دوفازی غنی از مایع و تعداد کمی از آنها غنی از فاز بخار  هستند و برخی نیز تنها از مایع تشکیل شده‌اند. بر پایه مطالعه میانبارهای سیال اولیه، سیال کانه‌ساز در کانسار چشمه‌حافظ، دمای همگن‌شدن پایین تا متوسط (135 تا 285 درجه سانتی‌گراد) و شوری پایین تا متوسط (1 تا 13 درصد وزنی معادل NaCl) دارد. نسبت ایزوتوپی گوگرد در سیال گرمابی در تعادل با کانی‌های سولفیدی، میان ‰1/4+ تا 6/1-  است و میتواند نشانگر منبع ماگمایی برای گوگرد باشد. با توجه به کانی‌شناسی کانسنگ (کانه و باطله) و دگرسانی، سیال کانه‌ساز pH نزدیک به خنثی و ماهیت احیایی داشته است. کانی‌شناسی کانسنگ، محتوای فلز، نسبت Ag/Au میان 16 تا 25، حضور اسفالریت‌فقیر از آهن، کانی‌شناسی دگرسانی، وجود بافت‌های نواربندی قشرگون متقارن و نامتقارن، بافت ‌کلوفورمی و دامنه دما و شوری میانبارهای سیال‌، نشانگر کانه‌زایی از نوع اپی‌ترمال نوع سولفیدی‌شدن متوسط است. کانی‌شناسی دگرسانی در کانسار چشمه‌حافظ، معرف گروهی از ذخایر سولفیدی‌شدن متوسط است که به سمت ذخایر سولفیدی‌شدن پایین گرایش دارند}, keywords_fa = {چشمه‌حافظ,ترود- چاه‌‎شیرین,میانبار سیال,ایزوتوپ گوگرد,اپی‌ترمال,سولفیدی‌شدن متوسط}, url = {http://www.gsjournal.ir/article_53682.html}, eprint = {http://www.gsjournal.ir/article_53682_1df553bcfe0d9508e468d3bc37cf5bb4.pdf} }