@article { author = {Ataei, M. and Hoseinie, S. H.}, title = {Investigation of the Influence of Abrasivity on Drillability of Rocks}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {19}, number = {74}, pages = {137-142}, year = {2010}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2010.57345}, abstract = {Abrasivity, as one of the most important parameters has great influence on drilling rate. Up to now, four known methods such as "Rock Abrasiveness Index (RAI)", "Cerchar Abrasiveness Index (CAI)", "Schimazek's wear factor (F-abrasivity)" and "Bit Wear Index (BWI)" have been developed for evaluating of rock abrasivity. In this paper, abrasivity of six rock types has been studied using Schimazek's wear factor and Rock Abrasiveness Index. For this purpose, equivalent quartz content and the mean size of rock grains have been calculated using thin section of rocks. All types of rocks have been tested view pointed of compressive and tensile strength (Brazilian test) in laboratory. For evaluating of drillability of rocks, the samples have been drilled using actual percussive-rotary drilling machine. Results reveal that by increasing Schmazek's wear factor, drilling rate decreases logarithmically and by increasing Rock Abrasiveness Index, drilling rate decreases exponentially.}, keywords = {Drilling,Abrasivity,Schimazek's wear factor}, title_fa = {بررسی تأثیر سایندگی بر قابلیت حفاری سنگ‌ها}, abstract_fa = {سایندگی به عنوان یکی از مهم‌ترین پارامترهای مؤثر در قابلیت حفاری سنگ‌ها، سرعت حفاری در معادن را به شدت تحت‌تأثیر خود قرار می‌دهد. تا کنون چهار روش شناخته شده برای ارزیابی سایندگی سنگ‌ها ارائه شده است که از جمله آنها می‌توان به روش شاخص سایندگی سنگ (RAI)، اندیس سایش سورشار (CAI)، فاکتور سایش شیمازک (F-abrasivity) و اندیس سایش سرمته (BWI) اشاره کرد. در این مقاله، سایندگی شش نوع سنگ معدن  با استفاده از فاکتور سایش شیمازک و  شاخص سایندگی سنگ مطالعه شده‌ است. برای این منظور با استفاده از مقاطع نازک، میزان کوارتز محتوی و میانگین اندازه دانه‌ها محاسبه شده است. همچنین میزان مقاومت  فشاری و کششی (آزمون برزیلی) سنگ‌ها در آزمایشگاه تعیین شده است. برای تعیین قابلیت حفاری سنگ‌ها، کلیه نمونه‌های سنگی با استفاده از دستگاه حفاری ضربه‌ای- دورانی چکش بالا مورد حفاری قرار گرفته و سرعت حفاری در آنها ثبت شده است. نتایج حاصل از آزمایش‌های انجام شده، نشان می‌دهد با افزایش میزان فاکتور سایش شیمازک سرعت حفاری  به صورت لگاریتمی و  با افزایش میزان شاخص سایندگی سنگ سرعت حفاری  به صورت نمایی کاهش می‌یابد.  }, keywords_fa = {حفاری,سایندگی,فاکتور سایش شیمازک}, url = {http://www.gsjournal.ir/article_57345.html}, eprint = {http://www.gsjournal.ir/article_57345_f413720b1a83f4657af7728661274645.pdf} }