@article { author = {Moazemi Goodarzi, M. and Rezaei, B. and Amini, A.}, title = {Iron Removal studies of Low Grade Diasporic Bauxite by Using Thermochemical Treatment}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {16}, number = {63}, pages = {72-76}, year = {2007}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2008.58442}, abstract = {In this paper, iron removal studies on high iron diasporic bauxite by thermochemical treatment was investigated for the first time. For this purpose, bauxite samples were calcined in temperatures between 600 and 1100°C and then leached with hydrochloric acid. Obtained results revealed, in spit of gradual decrease in both iron and aluminum extraction with rising calcination temperature, iron extraction to aluminum extraction is selective at calcination temperature above 900°C. Leaching studies of calcined sample at 900°C proved that leaching temperature is the most important parameter for iron dissolution in acid and rising leaching temperatures from 20 to 95°C increases iron extraction over 70%. The other optimum parameters are: leaching time120 minutes, acid concentration 50% V/V, grinding size of 210 µm, pulp density of 15% solid by weight. As a result of optimizing parameters, 96.5% of bauxite iron content removed successfully with 88.5% aluminum recovery and solid residue iron content, i.e., the obtained concentrate, decreased from 27.02 to 1.59%.     }, keywords = {Iron removal,Diasporic bauxite,Thermochemical treatment,Leaching,Hydrochloric acid,Calcination}, title_fa = {مطالعات آهن زدایی بوکسیت دیاسپوری کم عیار با استفاده از روش گرماشیمیایی}, abstract_fa = {در این تحقیق، امکان آهن زدایی نمونه بوکسیت دیاسپوری پرآهن با استفاده از روش گرماشیمیایی برای نخستین بار مطالعه شده است. بدین منظور، نمونه در دماهای 600 تا 1100 درجه سانتی‌گراد کلسینه گردید و آزمایشهای اسیدشویی با استفاده از اسید کلریدریک بر روی آن انجام شد. بر اساس نتایج به دست آمده با افزایش دمای کلسیناسیون، به تدریج انحلال پذیری آلومینیم و آهن در اسید کاهش می‌یابد ولی افزایش دمای کلسیناسیون تا بیش از  900 درجه سانتی‌گراد سبب انحلال انتخابی آهن نسبت به آلومینیم در اسید می‌شود. بررسی عوامل موثر بر اسیدشویی نشان داد که دمای انحلال اثر گذارترین پارامتر بر بازیابی آهن از نمونه به محلول اسیدی است به نحوی که با افزایش آن از 20 تا 95 درجه سانتی‌گراد، می‌توان با حفظ ماهیت انتخابی فرایند، بازیابی آهن را از 89/7 درصد به 02/81 درصد افزایش داد. در ادامه مدت زمان 120 دقیقه، غلظت اسید 50 درصد، ابعاد خردایش  کوچک‌تر از 210 میکرون و درصد جامد 15 به عنوان مقادیر بهینه دیگر پارامترها انتخاب شد که در نتیجه بازیابی آهن در محلول تا 5/96 درصد افزایش یافت.  }, keywords_fa = {آهن زدایی,بوکسیت دیاسپوری,آزمایشهای گرماشیمیایی,اسیدشویی,اسید کلریدریک,کلسیناسیون}, url = {http://www.gsjournal.ir/article_58442.html}, eprint = {http://www.gsjournal.ir/article_58442_aa861ea83f2c9908f37a6e15e0d1e155.pdf} }