@article { author = {Mahdizadeh, H. and Djamour, Y.}, title = {The Feasibility of Replacing Precise Levelling with GPS In Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {185-192}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63819}, abstract = {Today, with the use of Global Positioning System (GPS), it is possible to determine the geodetic height (relative to a Reference Ellipsoid) in easy mode with less time and cost. Despite of some advantages for leveling with GPS (GPS/Levelling) relative to traditional leveling, there is an important limitation which indicates the difference between Ellipsoid (as the reference datum for geodetic height) and Geoid (as the reference datum for orthometric height) named geoidal height. In order to achieve maximum accuracy in height component and then evaluating the quality results, different aspects of GPS/Levelling are considered in this study. In order to study the Feasibility of replacing precise levelling with GPS in Iran, a part of 55 km physical geodesy and geodynamic network in Azerbaijan region as well as the dense geodetic multipurpose network in Qeshm island were used. Based on different distances between each couple of points, this information, consisting of Orthometric and Geodetic heights for each point, is classified in 5 groups. The last Geoid model of Iran (IRGeoid10) with an absolute average accuracy of ±26 cm and a relative average accuracy of ±2.8 ppm are used for geoidal height. Obtained results show the accuracy of leveling height difference with GPS would be reduced by increasing the length of baseline. Index K as a criterion for determining level degree was calculated. This index shows that levelling with GPS in Iran could provide a precision of 4th degree leveling which can serve many engineering applications.}, keywords = {Geoid,Orthometric height,Geodetic height,GPS,levelling with GPS}, title_fa = {مطالعه امکان‌سنجی جایگزینی ترازیابی دقیق با GPS/Levelling در منطقه ایران}, abstract_fa = {امروزه با گسترش استفاده از سامانه تعیین موقعیت جهانی (GPS) این امکان فراهم شده که بتوان ارتفاع ژئودتیک هر نقطه را نسبت به بیضوی مرجع به سادگی با کمترین زمان و هزینه تعیین کرد. با وجود مزایای روش نوین ترازیابی با GPS در برابر ترازیابی سنتی، دسترسی به ارتفاع ارتومتریک نقاط با این روش محدودیت‎هایی دارد. نکته اساسی در این خصوص وجود اختلاف میان سطح مبنای ارتفاعی ترازیابی سنتی (ژئویید) و سطح مبنای ارتفاعی GPS (بیضوی) است که باید اثر آن در ترازیابی‌های نسبی مورد توجه قرار گیرد. در این پژوهش به جنبه‎های مختلف روش ترازیابی با GPS برای کسب بیشترین دقت در مؤلفه ارتفاعی و مقایسه این روش (ترازیابی با GPS) با ترازیابی هندسی (یا ترازیابی سنتی) پرداخته می‎شود. برای بررسی و مطالعه ترازیابی با GPS و میزان دقت قابل حصول، از اطلاعات شبکه 55 کیلومتری فیزیکال ژئودزی و شبکه ژئودینامیک ایران در منطقه آذربایجان و اطلاعات نقاط ژئودزی جزیره قشم استفاده شده است. این اطلاعات در برگیرنده ارتفاعات ارتومتریک و ژئودتیک شبکه نقاط مورد استفاده است که در این پژوهش در 5 دسته با فواصل مختلف تقسیم و انتخاب شده‎اند. برای محاسبه ارتفاع ژئویید از آخرین مدل ژئویید ملی جاذبی ایران (IRGeoid10) با دقت مطلق متوسط cm 26± و دقت نسبی متوسط ppm 8/2± استفاده شده است. نتایج حاصل بیانگر کاهش دقت اختلاف ارتفاع ترازیابی با GPS بر حسب افزایش طول خطوط مبناست. محاسبه متغیر k به عنوان معیاری برای تشخیص درجه ترازیابی، نشان می­دهد که در حال حاضر ترازیابی با GPS در ایران دقتی معادل ترازیابی درجه 4 فراهم می‎سازد.}, keywords_fa = {ژئویید,ارتفاع ارتومتریک,ارتفاع بیضوی,GPS,ترازیابی با GPS}, url = {http://www.gsjournal.ir/article_63819.html}, eprint = {http://www.gsjournal.ir/article_63819_4f5554bbd35f54adb19b4213d2891b99.pdf} }