@article { author = {Peernajmodin, H. and Rastad, E. and Rajabi, A.}, title = {Ore structural, textural, mineralogical and fluid inclusions studies of the Kouh-Kolangeh Zn-Pb-Ba deposit, Malayer- Isfahan metallogenic belt, South Arak, Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {287-302}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63856}, abstract = {The Kouh-Kolangeh carbonate-hosted Zn-Pb-Ba deposit is hosted by Lower Cretaceous detrital-carbonate sequence in the central part of the Malayer-Isfahan metallogenic belt (MEMB) and has been formed within an extensional basin. Ore mineralization occurred as concordant with layering in the upper part of non- argillic massive orbitolina gray limestone (Kl) and at the boundary of shale- marl with intercalated thin bedded limestone unit (Ks) with Aptian age. Sulfide minerals include sphalerite, galena and pyrite. Barite is the most abundant non-sulfide mineral associated with quartz, calcite and dolomite. Ore textures and structures include breccia, replacement, vein-veinlets, massive barite and laminated ore. Silicification and carbonatation (calcification- dolomitization) are the main wall-rock alterations. Based on fluid inclusion studies, fluid inclusions can be divided into two types: (I) two-phase fluid inclusions (T1) with amoebic and irregular shapes and average homogenization temperature of (T1) 206.8°C and the average salinity of 8.3 wt% NaCl. (II) CO2-rich three-phase fluid inclusions (LCO2-LH2O-VCO2) (T II) with spherical shapes and average total homogenization temperature of (T1) 234.8°C and the average salinity of 7.17 wt% NaCl. According to evidence such as tectonic setting, type of host rock, layered geometry of deposit, ore textures and structures, homogenization temperature, average salinity and presence of massive barite, the Kouh Kolangeh deposit can be considered as an Irish-type Zn- Pb deposit.}, keywords = {}, title_fa = {ساخت و بافت، کانی‌شناسی و مطالعه میانبارهای سیال کانسار روی- سرب – باریت کوه‌کلنگه، کمربند فلززایی ملایر- اصفهان، جنوب اراک}, abstract_fa = {کانسار روی- سرب- باریت کوه­کلنگه با سنگ میزبان کربناته در توالی آواری- کربناته کرتاسه زیرین حوضه جنوب اراک و در بخش میانی کمربند فلززایی ملایر- اصفهان در حوضه کششی پشت کمانی تشکیل شده است. کانه­زایی به‌صورت هم­روند با لایه‎بندی در بخش بالایی سنگ‌آهک خاکستری اربیتولین‎دار (واحد Kl) در زیر واحد شیل- مارن با میان‎لایه سنگ‎آهک نازک لایه (واحد Ks) به سن آپسین رخ داده است. کانی‌های سولفیدی شامل اسفالریت، گالن و پیریت هستند و فراوان‌ترین کانی غیر سولفیدی باریت است که با کوارتز، کلسیت و دولومیت همراهی می‎شود. ساخت و بافت ماده معدنی به‌صورت برشی، جانشینی، رگه- رگچه­ای، لامینه- پراکنده و باریت توده­ای همراه با سولفید است. دگرسانی‌های سیلیسی­­- کربناتی شدن (کلسیتی- دولومیتی) اصلی­ترین دگرسانی‌های همراه با کانه­زایی به شمار می­روند. میانبارهای سیال مطالعه شده در کانسار را می­توان به دو نوع تقسیم کرد. میانبارهای نوع اول، دوفازی غنی از مایع با شکل‌های کروی و بیضوی و آمیبی، میانگین دمای همگن‎شدگی آنها 8/206 درجه سانتی‌گراد و میانگین درجه شوری 3/8 درصد وزنی معادل NaCl و میانبارهای نوع دوم، سه‎‌فازی (دو فاز مایع آب و CO2 و یک فاز بخار) با شکل‌های کروی و بیضوی، میانگین دمای همگن‎شدگی 8/234 درجه سانتی‌گراد و میانگین درجه شوری 17/7 درصد وزنی معادل NaCl  هستند. با توجه به نتایج مطالعات صورت گرفته و بر پایه محیط زمین­ساختی، نوع سنگ میزبان، شکل لایه­ای کانسار، ساخت و بافت ماده معدنی، دمای همگن‎شدگی و درجه شوری میانبارهای سیال و رخداد باریت توده­ای، می­توان کانسار کوه­کلنگه را مشابه با کانسارهای روی- سرب- باریت نوع ایرلندی در نظر گرفت.}, keywords_fa = {کانه‎زایی روی- سرب- باریم,میزبان کربناته,کرتاسه زیرین,حوضه کششی پشت کمانی,نوع ایرلندی,کوه کلنگه,جنوب اراک}, url = {http://www.gsjournal.ir/article_63856.html}, eprint = {http://www.gsjournal.ir/article_63856_1b1400fff68870d17dbe54c258952f4f.pdf} }