S Afzali; N Nezafati; M Ghaderi
Abstract
The Gazestan magnetite–apatite deposit is located 78 km east of Bafq, in the Bafq-Poshtebadam subzone of the Central Iran structural zone. The rock units in the area belong to the Rizou series and consist of carbonate rocks, shale, tuff, sandstone and volcanic rocks. Intrusive rocks in the form ...
Read More
The Gazestan magnetite–apatite deposit is located 78 km east of Bafq, in the Bafq-Poshtebadam subzone of the Central Iran structural zone. The rock units in the area belong to the Rizou series and consist of carbonate rocks, shale, tuff, sandstone and volcanic rocks. Intrusive rocks in the form of stock and dyke crop out as granodiorite and granite in various places. Trachytic and dacitic rocks in the area are green due to chloritic alteration and host iron and phosphate mineralization. The main alteration types are chloritic and argillic, while sericitic, potassic, and silicic alterations as well as tourmalinization and epidotization are also found in the rock units. Five forms of mineralization are distinguished in the Gazestan deposit, including massive iron ore with minor apatite, apatite-magnetite ore, irregular vein-veinlets (stockwork) in the brecciated green rock and disseminated and monomineralic massive apatite veins. Fluid inclusion studies were conducted on the apatites of two stages. According to these studies, temperature and salinity values in the stage-I apatite are higher than those in stage-II apatite. Lower salinity values in the stage-II apatite could be due to contamination of magmatic fluids with meteoric waters during later stages of mineralization. Oxygen, hydrogen and carbon stable isotope composition of magnetite, quartz, apatite and calcite; and calculation of oxygen isotope composition in the fluid equilibrated with the oxide minerals suggest mixing the magmatic fluids with basin brines in mineralization of the Gazestan deposit.
M. R. Hosseini; S. Alirezaei; J. Hassanzadeh
Abstract
The Bahr Aseman volcanic-plutonic complex is located to the southeast of the Kerman magmatic belt. Unlike Kerman magmatic belt which formed and evolved during Cenozoic in a dominantly continental arc and post-collision tectonic setting, Bahr Aseman complex formed during Late Cretaceous in an oceanic ...
Read More
The Bahr Aseman volcanic-plutonic complex is located to the southeast of the Kerman magmatic belt. Unlike Kerman magmatic belt which formed and evolved during Cenozoic in a dominantly continental arc and post-collision tectonic setting, Bahr Aseman complex formed during Late Cretaceous in an oceanic island-arc setting. The complex is composed of andesitic and andesitic-basaltic lava flows and subordinate pyroclastic materials and carbonate interlayers, as well as abyssal tonalite to quartz-diorite and quartz- monzodiorite intrusive bodies and shallow dioritic intrusions. Vein- type copper deposits, iron skarn and copper skarn are the main ore deposit types in Bahr Aseman. Chalcopyrite is the main ore mineral in vein-type and skarn-type copper deposits; the mineral is converted to oxide copper ores at surface and shallow depths. Magnetite is the main commodity in skarn type iron deposit. Highly altered porphyritic bodies associated with copper oxide ore were identified that are comparable, in some aspects, with porphyry type copper deposits; subsurface data, however, is required for conclusive remarks. The various types of deposits are distinguished by distinct fluid inclusion characteristics. In the vein type copper deposits, fluids in association with mineralization represent dominant homogenization temperature (Th) of 150-220 ºC and salinity of 5-10 and 25-30 wt% NaCl. Fluids in the skarn type copper deposits represent 170-250 ºC and ranges of 5-15 and 27-35 wt% NaCl as dominant Th and salinity, respectively. The δ34S values in the vein-type copper deposits vary between +3.9 and +5‰, suggesting a magmatic origin for sulfur and probably metals (directly derived from magma or leached from magmatic rocks). Sulfur isotope ratios for two samples from Moka are +4.3 and +7.1‰, slightly different from typical magmatic δ34S ranges. Oxygen and hydrogen isotope ratios for the vein-type copper deposits, measured on quartz and fluids extracted from inclusions in the mineral, are -6.6 to +1.9‰ and -79.4 to -51.8‰, respectively. This values suggest mixing of magmatic and meteoric fluids and/or fluid-rock interactions at different ratios. It appears that larger deposits have more shares of fluids with magmatic origin. With regards to the island-arc tectonic setting, recognized deposit types and ore minerals paragenesis, finding new copper and iron and probably gold deposits are possible in the Bahr Aseman area.
M Hajibahrami; N Taghipour; G Ghorbani
Abstract
The Hamyerd iron deposit is located in the northeast of Semnan in the boundary of the southern Alborz and Central Iran structural zones. A sub-volcanic body of monzonite and monzodiorite composition intruded limestone and pyroclastic rocks (equivalent to the middle Eocene Karaj formation). The iron mineralization ...
Read More
The Hamyerd iron deposit is located in the northeast of Semnan in the boundary of the southern Alborz and Central Iran structural zones. A sub-volcanic body of monzonite and monzodiorite composition intruded limestone and pyroclastic rocks (equivalent to the middle Eocene Karaj formation). The iron mineralization occurred at the contact between intrusive bodies and these sedimentary rocks. The extensive hematite content along with minor amounts of magnetite, goetite, limonite, pyrite, dolomite, barite and calcite are important characteristics of the Hamyerd ore deposit. Mineralization occurred as veins and also hematite lenses with minor magnetite content. Fluid inclusion and stable isotope (S, C and O) studies were integrated to explore the Hamyerd iron ore genesis. Petrographic studies display five types of fluid inclusions in quartz and 4 types in barite. Fluid inclusions in quartz include single-phase liquid, single-phase gas, two-phase liquid-rich, two-phase gas-rich, and three-phase (liquid-solid-gas) inclusions. Three-phase liquid-solid-gas inclusions were not detected in barite. Microtermometry studies in two-phase liquid-rich inclusions revealed homogenization temperatures of 200-250 ˚C and 100-200 ˚C, and salinities of 10-20 and 0.5-5 wt% NaCl equivalent for quartz and barite fluid inclusions, respectively. Microthermometry of halite-bearing three-phase fluid inclusions showed homogenization temperature from 200 to 350 ˚C and salinity from 30 to 40 wt% NaCl equivalent. δ34SCDT values of pyrites at Hamyerd iron deposit are in the range of 2.2 to 7.4‰. The isotopic values of barites range from 13.6‰ to 20.2‰ for δ34SCDT and 10.2‰ to 12.1‰ for δ18OVSMOW, respectively. The carbon and oxygen isotopic values of calcite are in the range of -3.4‰ to -4.5‰ and 17.7‰ to 19.1‰, respectively. Microthermometry of fluid inclusions and stable isotopes (S, O, C) at Hamyerd iron deposit suggested mixing of magmatic and meteoric fluids as origin of hydrothermal solutions. Mineralization in the Hamyerd iron deposit is probably similar to Fe-skarn deposits.