@article { author = {}, title = {editor remark}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {1-1}, year = {2000}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {}, abstract = {}, keywords = {}, title_fa = {سخن سردبیر}, abstract_fa = {}, keywords_fa = {}, url = {http://www.gsjournal.ir/article_64264.html}, eprint = {} } @article { author = {}, title = {reviewer}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {2-2}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {}, abstract = {}, keywords = {}, title_fa = {داوران}, abstract_fa = {}, keywords_fa = {}, url = {http://www.gsjournal.ir/article_64265.html}, eprint = {http://www.gsjournal.ir/article_64265_e0c491661718ce1ebc907ff6a698e503.pdf} } @article { author = {Mohammaddoost, Hadi and Ghaderi, Majid and Hassanzadeh, Jamshid}, title = {Sulfur isotope variations of sulfide minerals in porphyry systems of the Meiduk cluster, Kerman Cenozoic magmatic arc, southeastern Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {3-16}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2017.75379.1019}, abstract = {Sulfur isotope data on pyrite, chalcopyrite and molybdenite in the A, B and D type veinlets in porphyry systems of the Meiduk cluster, located in northwestern part of the Kerman copper belt, show that these systems have near zero δ34S values. Sulfur isotope composition for the Chah-Firouzeh and Iju deposits and Serenu, God-e-Kolvari and Kader prospects is from -1.4 to +2.5 (average +0.31), -1.3 to +1.1 (average +0.07), +0.1 to +2.4 (average +0.87), -1.5 to +0.2 (average -0.1) and -4.1 to +1 (average -1.04), respectively. These results suggest a magmatic source for sulfur. Also, limited range of isotopic variations and analogous isotopic composition for the three types of veinlets reveals that with evolution of the hydrothermal system, no significant changes occurred in the primary and relatively homogenous source of sulfur. Comparison between the data for the Meiduk cluster with available data from other deposits in middle and southern parts of the Kerman belt suggested that in porphyry systems of the northwestern, and to some extent southern parts, of the Kerman Cenozoic magmatic arc, sulfur was provided by a mafic magma originated from metasomatized subcontinental lithospheric mantle (SCLM) which was affected by assimilation with continental crust; while in the southern parts, processes related to subduction and fluids from seawater and associated sediments had a major role in their sulfur isotope composition.}, keywords = {Porphyry copper,sulfide mineral,sulfide isotope,KCMA,Iran}, title_fa = {تغییرات ایزوتوپی گوگرد کانی‌های سولفیدی در سامانه‌های پورفیری خوشه میدوک، کمان ماگمایی سنوزوئیک کرمان، جنوب‌خاور ایران}, abstract_fa = {داده‌های ایزوتوپ گوگرد بر روی کانی‌های پیریت، کالکوپیریت و مولیبدنیت موجود در رگچه‌های تیپ A، B و D سامانه‌های پورفیری خوشه میدوک واقع در بخش شمال‌باختری کمربند مس کرمان نشانگر ترکیب ایزوتوپی δ34S نزدیک به صفر برای این سامانه‌ها است. ترکیب ایزوتوپی گوگرد برای کانسارهای پورفیری چاه فیروزه و ایجو و اندیس‌های سرنو، گود کلواری و کدر به ترتیب بین 1.4- تا 2.5+ (میانگین 0.31+)، 1.3- تا 1.1+ ( میانگین 0.07+)، 0.1+ تا 2.4+ (میانگین 0.87+)، 0.2+ تا 1.5- (میانگین 0.1-) و 4.1- تا 1+ (میانگین 1.04-) در هزار است که می‌تواند معرف منبع ماگمایی باشد. همچنین دامنه محدود تغییرات ایزوتوپی و ترکیب ایزوتوپی مشابه برای سه گروه رگه نشان می‌دهد که با تحول سیستم گرمابی، تغییر و تحول چندانی در منبع اولیه و به نسبت همگن گوگرد رخ نداده است. مقایسه داده‌های حاصل از خوشه میدوک با داده‌های موجود در مورد برخی کانسارهای بخش میانی و جنوبی کمربند کرمان پیشنهاد می‌کند که منشأ گوگرد در سامانه‌های پورفیری بخش شمال‌باختری و تا حدی بخش‌های میانی کمان ماگمایی سنوزوئیک کرمان از یک ماگمای مافیک که از گوشته لیتوسفری زیرقاره‌ای (SCLM) متاسوماتیز شده منشأ گرفته تأمین شده و آلایش با سنگ‌های پوسته قاره‌ای نیز بر ترکیب δ34S اثرگذار بوده است، درحالی‌که در بخش جنوبی، فرایندهای مرتبط با فرورانش و سیالات ناشی از آب دریا و رسوبات همراه، در ترکیب ایزوتوپی گوگرد نقش اساسی داشته‌اند.}, keywords_fa = {Porphyry copper,sulfide mineral,sulfide isotope,KCMA,Iran}, url = {http://www.gsjournal.ir/article_44827.html}, eprint = {http://www.gsjournal.ir/article_44827_9caf6e4e9ce168c4e89afd11dd5bbecf.pdf} } @article { author = {Arjomandi, M. and Saremi, A. and Sarraf, A. P. and Sedghi, H. and Roustaei, M.}, title = {Predicting land subsidence rate by estimating aquifer hydraulic parameters, obtained from aquifer-test data and optimization algorithms in the district 19 of Tehran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {17-26}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63740}, abstract = {Groundwater modeling, land subsidence hazards and proper management of groundwater resources of the alluvial aquifer in the district 19 of Tehran, south of Tehran Plain need precise estimation of aquifer hydraulic parameters. Besides, traditional techniques and usual graphical methods have been approximate, expensive and time-consuming.  In this paper, ten sets of aquifer test data were selected; moreover, these data were recorded in a well located in district 19 of Tehran, southwest of Tehran Plain during five years (2008 to 2012). For solving the previous methods’ problems, three computer codes have been developed to optimize aquifer parameters using three optimization approaches on the other hand, two kinds of genetic algorithms and a multi-elitist particle swarm optimization (MEPSO) which avoid getting stuck in local optima and save time. The efficacy and efficiency of the developed codes have been examined using ten sets of aquifer test data of a confined aquifer, and then their results have been compared with the results obtained by the graphical approach using AquiferTest software. Based on the fitness function, i.e. sum of square errors, the MEPSO and the GAs in descending order are more reliable for estimating the parameters contrast with the graphical method. Furthermore, the sensitivity analysis of the parameters during the performance of the optimization approaches has authenticated that the results obtained are enough precise and reliable. Then an equation has been presented according to the amounts of hydraulic conductivity which have been obtained using MEPSO during the years and the amounts of land subsidence rates which have been obtained using geodetic measurement methods to predict the amounts of land subsidence rates through the time when the amount of hydraulic conductivity will reach to Ultimately, based on the equation, after 30 years the amount of hydraulic conductivity will reach to and the total amount of land subsidence will be 0.5213 m from 2008 to 2038 . Moreover, land subsidence rates’ data obtained from interferometry synthetic aperture radar (InSAR) have confirmed the accuracy of the equations.}, keywords = {Particle Swarm Optimization,South of Tehran Plain,Groundwater modeling,Land subsidence rate,InSAR}, title_fa = {پیش‌بینی نرخ فرونشست زمین با برآورد متغیرهای هیدرولیکی آبخوان، حاصل‌‌ شده از داده‌های آزمون پمپاژ و الگوریتم‌های بهینه‌‌سازی در منطقه 19 تهران}, abstract_fa = {مدل‏سازی آب زیرزمینی، بررسی خطر فرونشست و مدیریت صحیح منابع آب زیرزمینی نیازمند برآورد دقیق متغیرهای هیدرولیکی آبخوان است. افزون بر این، روش‌‌های پیشین و روش‌‌های گرافیکی معمول تقریبی، گران و زمان‌‌بر هستند. در این پژوهش، ده سری از داده‌‌های آزمون پمپاژ، ثبت شده طی پنج سال (1387 تا 1391) در یک چاه در منطقه 19 در جنوب دشت تهران انتخاب شدند. همچنین، طی سال‌های یاد شده نرخ فرونشست برای هر سال توسط روش ژئودزی زمینی ارزیابی شد. برای رفع مشکلات روش‌های پیشین، 3 کد کامپیوتری با به‌‌‏کارگیری  الگوریتم‌های ژنتیک و الگوریتم چندنخبه‌گرایی بهینه‌سازی گروهی ذرات توسعه یافتند تا متغیرهای هیدرولیکی آبخوان را برآورد کنند. کفایت و کارایی کدهای توسعه یافته، با به‌کارگیری 10 دسته داده مربوط به آبخوان محبوس آزموده شد‌ و سپس نتایج آنها با نتایج حاصل شده از روش گرافیکی حاصله از نرم افزار AquiferTest مقایسه شدند. بر‌‌ پایه نتایج تابع شایستگی، الگوریتم بهینه‌‌سازی چندنخبه‌‌گرایی گروهی ذرات و الگوریتم‌های ژنتیک‌‌ به‌‌ترتیب قابل اعتمادتر از روش گرافیکی برای برآورد متغیرهای هیدرولیکی آب زیرزمینی بودند. افزون بر این، تجزیه حساسیت متغیرهای هیدرولیکی در طول عملکرد روش‌های بهینه‌‌سازی یاد شده اثبات کرد که نتایج بسیار دقیق و قابل اعتماد هستند. سپس با توجه به مقادیر هدایت هیدرولیکی حاصل طی سال‌‌های مختلف با استفاده از الگوریتم چندنخبه‌‌گرایی بهینه‌‌سازی گروهی ذرات رابطه‌ای ارایه شد تا بتواند تغییرات هدایت هیدرولیکی را طی زمان پیش‌‌بینی کند و سپس رابطه دیگری به ‌‌دست آمد تا با توجه به مقادیر هدایت هیدرولیکی طی زمان مقدار نرخ فرونشست برای سال‌‌های آینده تعیین شود. همچنین در این مقاله فرض شده‌‌ است با رسیدن هدایت هیدرولیکی آبخوان مربوطه به مقدار  آب زیرزمینی برداشت نمی‌‌شود. در پایان با توجه به روابط به‌‌دست آمده و برداشت پیوسته آب زیرزمینی در منطقه مربوط، 30 سال طول می‌کشد تا هدایت هیدرولیکی به   برسد و در طول زمان 1387 تا 1417 در منطقه مربوط، 52/0متر فرونشست زمین حاصل می‌‌شود. داده‌‌های نرخ فرونشست زمین حاصل از روش تداخل‎سنجی راداری ماهواره‌ای (InSAR) نیز درستی روابط حاصل را تأیید کردند.}, keywords_fa = {Particle Swarm Optimization,South of Tehran Plain,Groundwater modeling,Land subsidence rate,InSAR}, url = {http://www.gsjournal.ir/article_63740.html}, eprint = {http://www.gsjournal.ir/article_63740_15d7c34cbf8ac8e322c5160525eb953e.pdf} } @article { author = {Shahabi, Sh. and Shafaii Moghadam, H. and Ghorbani, Gh.}, title = {Sr-Nd isotopic geochemistry and 40Ar-39Ar and Rb-Sr dating of Ghoshchi A2-type granites, N Uromiyeh, NW Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {27-40}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63747}, abstract = {The Ghoshchi granitic rocks are located in at north of Uromiyeh city and are mainly composed of alkali-feldspar granites, granites and aplitic dykes. These samples belong to calc-alkaline to shoshonitic series and show Fe enrichment and are classified as A-type granites. Ghoshchi granites have high K2O+Na2O, FeO/MgO, Gl/Al, Ce/Nb, Zr, Y/Nb, and low CaO, Ba, Sr and Eu and are A2-type granites. Geochemical and Sr-Nd isotopes evidences suggest that these rocks were generated by highly fractional crystallization of a parental magma (melts), was derived  from an enriched mantle source, which have undergone contamination by crustal materials and formed in post-collisional extentional environments in a within-plate setting. The crystallization age of these rocks, according to biotite 40Ar-39Ar and Rb-Sr dating is 262±26 Ma  and 256±20 Ma, as minimum age, respectively, and 320-330 Ma as crystallization age. Ghoshchi granites formed probably within extentional zones in at the late stages of Variscan tectonic events.}, keywords = {petrology,40Ar-39Ar Dating,Sr-Nd isotopes,A2-type granite,Ghoshchi}, title_fa = {ژئوشیمی ایزوتوپی Sr-Nd و سن سنجی 40Ar-39Ar و Rb-Sr گرانیت‌های نوع A2 قوشچی، شمال ارومیه، شمال باختر ایران}, abstract_fa = {سنگ‌های گرانیتی مجموعه قوشچی در شمال ارومیه بیشتر شامل آلکالی­فلدسپارگرانیت‌ها، گرانیت‌ها و دایک‌های آپلیتی هستند؛ با ماهیت کالک­آلکالن پتاسیم بالا تا شوشونیتی و غنی از آهن مشخص می­شوند و به گروه گرانیت­های A تعلق دارند. این سنگ­ها دارای مقادیر K2O+Na2O، FeO/MgO، Ga/Al، Ce/Nb، Zr و Y/Nb بالا و مقادیر CaO، Ba، Sr و Eu پایین و از نوع گرانیت­های نوع A2 هستند. شواهد ژئوشیمیایی و ایزوتوپی Sr-Nd، تبلور تفریقی شدید از مذاب‌های مشتق شده از گوشته غنی ­شده همراه با آغشتگی پوسته را آشکار می­سازد و محیط تشکیل آنها با موقعیت‌های کششی پس از برخورد درون صفحه­ای همخوانی دارد. سن­سنجی آرگون- آرگون روی کانی بیوتیت و Rb-Sr سنگ کل در سنگ­های گرانیتی به ترتیب نشان­دهنده سن کمینه 27±262 و20 ±256 میلیون سال و سن تبلور 330 تا 320 میلیون سال است و احتمالاً این گرانیت­ها در پهنه­های کششی در مراحل پایانی رویدادهای زمین ساختی کوهزایی واریسکن (Variscan) شکل گرفته­اند.}, keywords_fa = {petrology,40Ar-39Ar Dating,Sr-Nd isotopes,A2-type granite,Ghoshchi}, url = {http://www.gsjournal.ir/article_63747.html}, eprint = {http://www.gsjournal.ir/article_63747_ba5aed04d69696dfca468fb7df366876.pdf} } @article { author = {latifi, Z. and Foroughi, F. and Motamedalshariati, M. and Raeisossadat, S. N.}, title = {Calcareous nannofossils biostratigraphy of lower Cretaceous deposits of east of Iran, NW of Qayen (Nimbolook stratigraphic section)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {41-50}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63752}, abstract = {Calcareous nannofossils of Nimbolook section in north west of Qayen, east of Iran have been investigated. The section is 164 m thick and consists of limestone, marlstone and shale. Seventy six nannofossil species belong to thirty genera from fifteen families were identified. Based on the identified calcareous nannofossils, a part of subzone CC7b and biozone CC8 and a part of biozone CC9 of Sissingh biozonation (1977) and a part of subzone NC7 and biozones NC8, NC9 and a part of biozone NC10 of Roth biozonation (1978) have been suggested for the Nimbolook section. Therefore, an age of late Aptian–Albian and early Cenomanian? is assigned to the deposits of this section.}, keywords = {Nimbolook section,Biostratigraphy,Calcareous Nannofossil,Lower Cretaceous,Qayen}, title_fa = {زیست‎چینه نگاری نانوفسیل های آهکی کرتاسه پیشین خاور ایران، شمال باختر قائن (برش چینه‎شناسی نیمبلوک)}, abstract_fa = {در این مطالعه نانوفسیل­های آهکی برش نیمبلوک در شمال باختر قائن ارزیابی و بررسی شده ­است. برش نیمبلوک با ستبرای 164 متر شامل سنگ‌آهک، مارن و شیل است. در برش مورد مطالعه 76 گونه نانوفسیلی متعلق به 30 جنس از 15 خانواده شناسایی شد. بر پایه نانوفسیل­های شناسایی شده، بخشی از زیرزون CC7b و زیست‌زون­ CC8 و بخشی از زیست‌زون CC9 از زیست‌زون‌بندی Sissingh (1977) و زیرزون  NC7Cو زیست‌زون­های NC9, NC8 و بخشی از زیست زون  NC10از زیست‌زون‌بندی  Roth (1978)تشخیص داده شده­اند و سن نسبی آپتین پسین- آلبین و سنومانین پیشین؟ (late Aptian–Albian- early  Cenomanian?) برای نهشته­های این برش پیشنهاد می‌شود.}, keywords_fa = {Nimbolook section,Biostratigraphy,Calcareous Nannofossil,Lower Cretaceous,Qayen}, url = {http://www.gsjournal.ir/article_63752.html}, eprint = {http://www.gsjournal.ir/article_63752_b42b1b918968ca248ce525d631bcd5a8.pdf} } @article { author = {Alipour, S. and Mosavi-ovenlegi, Kh. and Hosseini, E. and Aslanpour, Sh. and Haseli, Z.}, title = {Geochemistry of major, trace and rare earth elements in bed-sediments of Urmia lake}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {51-62}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63758}, abstract = {The Urmia Salt Lake as the largest hyper saline lake of the world is located between west and east Azerbaijan provinces, NW Iran. Geochemistry of trace and rare earth elements of bed sediments taken from 25 Cm of the lower most of 1.5 meters depth  of drilled holes in 130 samples between 2014-2015 were investigated. General geochemical composition of samples revealed a very heterogeneous variation of major oxides at NW, NE, SW and SE parts of the lake.  MgO, CaO and Na2O show a high enrichment compared to UCC, PAA and NASC values. Main minerals of the bed sediments include halite, calcite, ankerite, quartz, orthoclase, augite, hornblende and chlorite. The overall geochemical composition of sediments, resemble ferruginous shale and graywacke sandstone. Weathering in the various parts of the bed sediments is relevant to general climatological characters in the region. Rb and Sr among trace elements show high anomaly in respect to UCC, PAAS and NASC, while Eu indicated high depletion, especially at SW corner of the lake. Geochemical comparisons indicate the major role of different rock units in forming bed sediments rather than sediments carried by entering rivers to the lake.}, keywords = {Geochemistry,Mineralogy,bed-sediments,Urmia Lake,Iran}, title_fa = {مطالعه‌ ژئوشیمی عناصر اصلی، جزیی و خاکی کمیاب در رسوبات بستر دریاچه ارومیه}, abstract_fa = {دریاچه ارومیه بزرگ‌ترین دریاچه فوق ­اشباع از نمک در جهان است که در میان استان‌های آذربایجان ­شرقی و غربی در شمال باختر ایران جای دارد. در این پژوهش ژئوشیمی عناصر اصلی، جزیی و خاکی کمیاب 130 نمونه که از 25 سانتی‌متری پایانی گمانه حفر شده با ژرفای یک و نیم متری میان سال­های 1394 تا 1395 برداشت شده است؛ بررسی شد. مطالعه ژئوشیمی عناصر اصلی نشان‌دهنده گوناگونی و ناهمگنی زیاد در مقدار اکسید عناصر اصلی در رسوبات بخش‌های شمال باختر، شمال خاور، جنوب باختر و جنوب بستر دریاچه‌  است. نتایج تجزیه طیف‌سنج پراش پرتو ایکس (XRD) رسوبات نشان می­دهد که فاز اصلی کانی­های رسوبات دریاچه را کانی­های هالیت، کلسیت، آنکریت، کوارتز، ارتوکلاز، کلریت، آلبیت، ژیپس، پلاژیوکلاز، اوژیت، آمفیبول و هورنبلند تشکیل می­دهند و رسوبات بستر دریاچه ارومیه از دید ترکیب کانی­شناختی شبیه کانی­های عمومی تشکیل‎دهنده شیل و ماسه­سنگ گری‎وک هستند. در میان اکسیدهای عناصر اصلی، MgO، CaO و Na2O غنی­شدگی بالایی نسبت به استانداردهای UCC، PAAS و NASC نشان می‌دهند. از مجموعه عناصر جزییRb  و Sr نسبت به UCC، PAAS و NASC غنی­شدگی بسیار بالایی همراه با تهی­شدگی Eu به‌ویژه در بخش جنوب باختر دریاچه نشان می‌دهند. مقایسه ترکیب ژئوشیمیایی رسوبات ژرفای مورد مطالعه­، با سنگ­های پیرامون دریاچه نشان از کنترل اصلی ترکیب کانی­شناختی توسط زمین­شناسی پیرامون دریاچه در مقایسه با کانی‌شناسی آورد رسوبی رودخانه­ها دارد.}, keywords_fa = {Geochemistry,Mineralogy,bed-sediments,Urmia Lake,Iran}, url = {http://www.gsjournal.ir/article_63758.html}, eprint = {http://www.gsjournal.ir/article_63758_0fa7668b597661453978b66d5d142cc2.pdf} } @article { author = {Ebrahimi, M. and Rafiei, M.}, title = {Petrography and geochemistry of the volcanic rocks in north of Zavieh, southwest of Karaj}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {63-74}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63757}, abstract = {Eocene pyroclastic-volcanic rocks, ranging in composition from basic to intermediate and acidic rocks, are widely exposed at north of Zavieh, southwest of Karaj. The pyroclastic-volcanic sequence is composed of basalt, trachy-basalt, basaltic trachy-andesite, andesite, trachy-andesite, trachydacite, dacite and rhyolite along with various pyroclastic rocks including ignimbrite, welded tuff, crystal tuff, lithic tuff, lithic crystal tuff, ash tuff and lapillistone. The pyroclastic-volcanic sequence contains large amount of ignimbrite. Common textures found in the studied volcanic rocks are porphyritic, glomeroporphyritic, cumulophyric, amygdaloidal and trachytic. Rock fragments and broken crystals are usually found in the pyroclastic rocks. Eutaxitic texture is commonly observed in the ignimbrite. Flow banding is seen in the study rhyolitic rocks. Meanwhile, columnar structure is commonly observed in the lava flows and ignimbrites. Pyroxene, amphibole, biotite, plagioclase and quartz are the major minerals in the volcanic sequence along with K-feldspar, opaque minerals and altered olivine as minor minerals. Calcite, chlorite, epidote and sericite are also present as accessory minerals. According to geochemical data the studied volcanic rocks are mainly calc-alkaline, however few samples plot in the alkaline and shoshonitic fields in some diagrams. Negative anomalies of Nb and Ta, Pb positive anomaly, large ion lithophile elements enrichment, rare earth elements enrichments and depletion in high field strength elements all indicate that the parent magma of the studied rocks has originated from a metasomatized asthenospheric mantel over the Benioff-Waddatti zone. Common existence of sieve texture in plagioclase crystals, corroded crystals of plagioclase and pyroxene and dark rim of Fe-Ti oxides around biotite and amphibole crystals all indicate that a disequilibrium condition existed during crystallization which is most probably due to magma mixing. However, assimilation, decompression and rapid ascend of magma may also produce such textures.}, keywords = {Pyroclastic-volcanic rocks,Geochemistry,Tectonic setting,Karaj,Orumih-Dokhtar zone}, title_fa = {سنگ‌نگاری و ژئوشیمی سنگ های آتشفشانی شمال زاویه، جنوب ‌باختر کرج}, abstract_fa = {در شمال زاویه (جنوب ‌باختر کرج) رخنمون گسترده‌ای از سنگ‌های آتشفشانی- آذرآواری ائوسن با ترکیب بازیک، حدواسط و اسیدی گسترش دارد. این مجموعه آتشفشانی- آذرآواری شامل گدازه‌های با ترکیب سنگ‌شناسی بازالت، تراکی‌بازالت، تراکی‌آندزیت بازالتی، آندزیت، تراکی‌آندزیت، تراکی‌داسیت، ریولیت و سنگ‌های آذرآواری مانند ایگنیمبریت، توف‌ جوش ‌خورده، توف بلورین، توف خرده‌سنگی، توف بلورین خرده‌سنگی، توف خاکستر و لاپیلی‌سنگ است. در این توالی آتشفشانی و آذرآواری ایگنیمبریت حجم قابل ملاحظه‌ای را به خود اختصاص می‌دهد. بافت‌های متداول در سنگ‌های آتشفشانی مورد مطالعه شامل پورفیریتیک، گلوپورفیریتیک، کومولوفیریک، بادامکی و تراکیتی هستند. در سنگ‌های آذرآواری قطعات خرده‌سنگی و بلورهای خرد شده به‌طور معمول یافت می‌شوند. در ایگنیمبریت‌ها بافت اتاکسیتی به‎‌طور متداول دیده می‌شود. ساخت جریانی در گدازه‌های ریولیتی و ساخت منشوری در جریان‌های گدازه و ایگنیمبریت‌های منطقه وجود دارند. کانی‌های اصلی در سنگ‌های مورد مطالعه شامل پیروکسن، آمفیبول، بیوبیت، پلاژیوکلاز و کوارتز است که با کانی‌های فرعی فلدسپار پتاسیم‌دار، کانی‌های کدر و الیوین دگرسان شده همراه هستند. کلسیت، کلریت، اپیدوت و سریسیت نیز به‌عنوان کانی ثانویه وجود دارند. بر پایه مطالعات ژئوشیمیایی، سنگ‌های آتشفشانی مورد مطالعه بیشتر کالک‌آلکالن هستند؛ ولی تعداد کمی از نمونه‎ها در برخی نمودارها در محدوده آلکالن و شوشونیتی قرار می‌گیرند. بی‌هنجاری منفی Nb و Ti، بی‌هنجاری مثبت Pb، غنی‌شدگی از عناصر سنگ‎دوست درشت‎یون، غنی‌شدگی از عناصر خاکی کمیاب سبک و تهی‌شدگی از عناصر با میدان پایداری بالا نشان از این دارد که ماگمای مادر این سنگ­ها از یک گوشته‌ سست‌کره‌ای متاسوماتیسم شده در بالای پهنه فرورانش منشأ گرفته است. وجود بافت غربالی فراوان در پلاژیوکلازها، خورده شدن پلاژیوکلازها و پیروکسن‌ها و همچنین حاشیه‌ سوخته بیوتیت‌ها و آمفیبول‌ها همگی نشان‎دهنده‌ وجود شرایط عدم تعادل در سامانه است که این امر به احتمال زیاد از  اختلاط ماگمایی ناشی می‌شود. با این وجود، هضم، بالاآمدگی سریع ماگما و کاهش فشار نیز می‌تواند این بافت‌ها را ایجاد کند.}, keywords_fa = {Pyroclastic-volcanic rocks,Geochemistry,Tectonic setting,Karaj,Orumih-Dokhtar zone}, url = {http://www.gsjournal.ir/article_63790.html}, eprint = {http://www.gsjournal.ir/article_63790_fc768f9ab99fc5085200a65f4294f231.pdf} } @article { author = {Samadi Moghadam, R. and Nozaem, R. and Dehbozorgi, M. and Mohajjel, M.}, title = {Geometric and kinematic analysis and of Derenjal Mountain’s faults, eastern block of Kalmard fault (Central Iran)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {75-86}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63792}, abstract = {Derenjal Mountains with NE-SW trend, is located in Central Iran, in northwest of Tabas block and in eastern block of Kalmard fault. In this region, the Paleozoic formations (Cambrian to Devonian) have been exposed and surrounded by Neogene and Quaternary deposits. Volcanic rocks of Cambrian limited to Diabasic Rocks Dominated in Kalshaneh Formation and Middle Jurassic (?) lens-shape Andesite massive that covered uncomfortably with Cretaceous non metamorphosed limestone. Kalmard Fault as an old basement and active fault in Central Iran as Principal Displacement Zone (PDZ) and adjacent deformed Deranjal Mountains, have a complex deformation history with respect to rotation of the Compressional Incremental Kinematic Axis during Geological time scale since late Paleozoic to late Cenozoic. Rotation in Central Iran blocks, changing of the convergence direction of Afro-Arabian plate with respect to Iran and also structural interaction between the Central Iran blocks, during tectonic evolutions, imposed the rotation of the Incremental Kinematic Axis (P-T-B) directions with respect to Derenjal Mountains and Kalmard Fault. These process made progressively new structures and also made changes in old structures since post Devonian. In this study, based of Field observation and geometric - kinematic structural Analysis of the more the 150 fault data, the architecture of fault assemblage of Derenjal area demonstrate Synthetic faults (P, R), antithetic faults (X, R’), compression faults (C2) faults and folding in F1 Class in Derenjal Area. These structures represent that the Compressional Incremental Kinematic Axis trend has been changed in anticlockwise direction from perpendicular to parallel with respect to Kalmard Fault since post Devonian to Late Cenozoic and finally superimposition of the strike slip tectonics on the contraction tectonics.}, keywords = {Geometric and kinematic analysis,Structural evolution,Derenjal Mountain,Kalmard fault,Central Iran}, title_fa = {تحلیل هندسی- جنبشی و تکامل ساختاری گسل های کوه درنجال، بلوک خاوری گسل کلمرد (ایران مرکزی)}, abstract_fa = {منطقه کوه درنجال در پهنه زمین­ساختی ایران مرکزی، در شمال باختری بلوک طبس و در سمت خاوری گسل کلمرد با روند شمال خاوری- جنوب باختری قرار دارد. در این منطقه تنها واحدهای سنگی پالئوزوییک (به سن کامبرین تا دونین) به همراه برونزد بسیار کمی از سنگ‌آهک به سن کرتاسه دیده می­شود. سنگ­های آذرین منطقه شامل توده آندزیتی لنزی شکل شمال کوه درنجال (به سن احتمالی ژوراسیک میانی) و توده­های نفوذی با ترکیب دیابازی نفوذ کرده در سازند کالشانه است. چرخش بلوک­های ایران مرکزی، برخورد صفحه عربی با ایران و همچنین اندرکنش ساختاری میان بلوک­های ایران مرکزی در طی تکامل زمین ساختی خود، سبب تغییر در جهت­گیری محورهای تنش جنبشی (Kinematic Stress Tensor, P-T-B) و در نتیجه شکل­گیری ساختارهای جدید و تغییر در ساختارهای کهن در طول تاریخ زمین­شناسی منطقه بوده است. گسل کلمرد به عنوان یک گسل پی­سنگی ایران مرکزی و نیز به عنوان پهنه اصلی جابجایی (PDZ) سبب شکل­گیری گسل­های امتدادلغز و وارون در منطقه کوه درنجال شده است. مشاهدات و برداشت­های صحرایی نشان‌دهنده وجود گسل­های همسو (R, P)، ناهمسو (R’, X) و فشارشی رده  C2و نیز چین‌خوردگی‌های رده F1 در منطقه کوه درنجال هستند. موقعیت و سازوکار ساختارهای ناحیه کوه درنجال، نشانگر تغییر جهت­ راستای محور فشارش (P Axis) به‌صورت پادساعت‌گرد از حالت عمود بر گسل کلمرد تا موازی با آن در بازه زمانی پالئوزوییک پایانی تا سنوزوییک پایانی است که سبب تشکیل گسل­ها و تغییر سازوکار جنبشی برخی از گسل­های مهم منطقه شده است.}, keywords_fa = {Geometric and kinematic analysis,Structural evolution,Derenjal Mountain,Kalmard fault,Central Iran}, url = {http://www.gsjournal.ir/article_63792.html}, eprint = {http://www.gsjournal.ir/article_63792_69c12c22a7f5ca24d797ce60e5b6e3cc.pdf} } @article { author = {Alidadi, N. and Mahdavian, A.}, title = {Modeling the amplification ratio of sandy soils using two methods of neural network and gene}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {87-98}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63795}, abstract = {When seismic waves pass through alluvial layers, the seismic wave amplitude increases significantly in some periods, which is known as site amplification. In this case, it can be analyzed with an analytical model of the surface response spectrum Estimates of the input response spectrum. This behavior is essential in assessing the seismic performance of the structures and vital arteries. In this paper, we investigate this effect on different layers of sand with different thicknesses for Urmia city, a metropolitan area in the North West of Iran and an earthquake prone region. 120 geotechnical boreholes were drilled in sandy layers of different thicknesses in the central and northern parts of the city. The analysis simulated artificial acceleration based on seismic hazard analysis results. By observing the spectral accelerations for different periods at the earth’s surface the spectral acceleration magnitudes of the seams were shown for different periods. Using a neural network and genetic algorithm, these coefficients were modelled.  Using the evolutionary algorithm of gene expression programming, the mathematical relation was expressed in terms of sand layer thickness and different periods. However, the results obtained from the artificial neural network using the correlation coefficient and root mean square yielded more accurate results than the gene expression programming. In conclusion, the results show that by increasing the thickness of the sand layers, the amplification ratio also increases considerably for some periods. Using the modeling results, we can estimate the amplification of the sandy soils of  Urmia city with different thicknesses for variables up to 4 seconds.}, keywords = {Equivalent linear analysis,Site effects,Amplification ratio,Artificial accelerogram,Neural Network,Gene expression programming}, title_fa = {مدل‌سازی ضریب بزرگنمایی خاک‌های ماسه‌ای به دو روش شبکه عصبی و برنامه‌ریزی بیان ژن}, abstract_fa = {زمانی که امواج زمین‌لرزه از لایه‌های آبرفتی می‌گذرند؛ دامنه امواج لرزه‌ای در برخی از دوره‌ها به‌طور قابل‌توجهی افزایش می‌یابد که با عنوان بزرگنمایی سایت شناخته می‌شود. در این صورت می‌توان آن را با یک مدل تحلیلی به‌صورت نسبت طیف پاسخ سطح زمین به طیف پاسخ حرکت ورودی برآورد کرد. این رفتار در ارزیابی عملکرد لرزه‌ای سازه‌ها و شریان‌های حیاتی ضروری است. در این مقاله سعی شده است که این تأثیر در لایه‌های ماسه‌ای با ستبرا‌های متفاوت بررسی شود. برای نمونه، شهرستان ارومیه به عنوان یکی از کلان‌شهرهای شمال ‌باختری ایران و منطقه‌ای زمین‎لرزه‌خیز بررسی شده است. 120 گمانه ژئوتکنیکی حفر و لایه‌های ماسه‌ای با ستبرا‌های متفاوت در بخش مرکزی و خاوری آن دیده شده است. در این تحلیل‌ها از شتاب‌نگاشت‌های مصنوعی شبیه‌سازی‌ شده بر پایه نتایج تحلیل خطر لرزه‌ای به عنوان حرکت ورودی برای تحلیل استفاده شده است. سپس با مقایسه شتاب‌های طیفی در دوره‌های مختلف سطح زمین با مقادیر متناظر روی سنگ‌بستر لرزه‌ای طیف بزرگنمایی شتاب طیفی در دوره‌های مختلف ارائه و به­دنبال آن با استفاده از شبکه عصبی و الگوریتم ژنتیک مدل‌سازی این ضرایب انجام شد. نتایج به دست­ آمده نشان‎دهنده افزایش قابل‌ توجه ضریب بزرگنمایی در برخی از دوره‌ها با افزایش ستبرای لایه‌های ماسه‌ای است. با استفاده از نتایج مدل‌سازی ارائه ‌شده می‌توان ضرایب بزرگنمایی خاک‌های ماسه‌ای شهر ارومیه را با ستبرا‌های متفاوت به ازای دوره‌های متغیر تا 4 ثانیه برآورد کرد. در این مطالعه نتایج به ‌دست ‌آمده از شبکه عصبی مصنوعی با استفاده از معیارهای ضریب همبستگی و جذر میانگین مربعات خطا جواب‌های دقیق‌تری نسبت به برنامه‌ریزی بیان ژن ارائه کرده است. همچنین در این مطالعه با استفاده از الگوریتم تکاملی برنامه‌ریزی بیان ژن رابطه ریاضی به ازای ستبرای لایه ماسه‌ای و دوره‌های متفاوت بیان می‌شود.}, keywords_fa = {Equivalent linear analysis,Site effects,Amplification ratio,Artificial accelerogram,Neural Network,Gene expression programming}, url = {http://www.gsjournal.ir/article_63795.html}, eprint = {http://www.gsjournal.ir/article_63795_5e9b7ef58143eb4d561d66dc96ba3132.pdf} } @article { author = {Haghighi Bardineh, S. N. and Zarei Sahamieh, R. and Zamanian, H. and Ahmadi Khalaji, A.}, title = {Mineralization, geochemistry, fluid inclusion and stable isotopes (O, S) studies in the Takht Fe-skarn deposit, NE Hamedan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {99-112}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63797}, abstract = {The Takht iron deposit is located 120 km northeast of the Hamedan City in the Urumieh-Dokhtar magmatic belt. The Miocene Takht granodiorite intruded into the Cretaceous carbonates and resulted in Fe-skarn formation. Epigenetic mineralization in the Takht Deposit occurred predominantly as vein and lenticular ore bodies accompanied with argillic, carbonation, chloritization, epidotization and silicfication alterations and minerals including garnet, pyroxene, epidote, tremolite- actinolite, phlogopite, hornblende, quartz, calcite, magnetite, pyrite, specularite, chalcopyrite, hematite, limonite, goethite and malachite. Chemical composition indicates the presence of Si, Al, Ca, Mg, Ti and chalcophile elements such as Cu, Zn, As and Pb that originate from the coexistence of silicate and sulfide minerals with magnetite. The microthermometric results revealed homogenization temperatures (Th) from 153.2°C to 338.3°C and salinity from 0.827 wt.% NaCl eq. to 25.36 wt.% NaCl eq.. The δ18O (SMOW) values of magnetite were measured in the range of −0.46‰ to +2.31‰ and δ18O water is +8.1‰ to +10.9‰, respectively. These isotope values are similar to magmatic fluids that were also equilibrated with 18O enriched sources. The δ34S (V-CDT) values of pyrite show ranges of +7.3‰ to +12.5‰ and the original fluid δ34S H2S values were estimated ranging from +5.7‰ to +10.9‰. These positive δ34S values confirm that sulfur is provided by evaporate sulfates. During the retrograde stage of the Takht Skarn, re-mobilized metals accompanied with metal-bearing fluids (provided by intrusion) were mixed with sulfur-bearing descending meteoric waters and eventually, the mixing of the two fluids led to calcic Fe-skarn mineralization in Cretaceous carbonates.}, keywords = {Iron,Calcic skarn,Fluid inclusion,Stable isotope,Takht deposit}, title_fa = {مطالعات کانی‌سازی، ژئوشیمی، میانبارهای سیال و ایزوتوپ پایدار (S و O) کانسار اسکارن آهن تخت، شمال ‌خاور همدان}, abstract_fa = {کانسار آهن تخت در فاصله 120 کیلومتری شمال ‌خاور شهر همدان و در شمال کمربند ماگمایی ارومیه- دختر قرار دارد. نفوذ توده‌ گرانودیوریتی میوسن میانی به ‌درون کربنات‎های کرتاسه سبب کانی‌سازی آهن شده است. کانی‌سازی دیرزاد پرکننده ‌فضای خالی و جانشینی به صورت رگه‌ و عدسی‌‌شکل با دگرسانی‌های آرژیلیک، کربنات، کلریت، اپیدوت، سیلیس وکانی‌های گارنت، پیروکسن، اپیدوت، ترمولیت- اکتینولیت، فلوگوپیت، هورنبلند، کوارتز، کلسیت، مگنتیت، پیریت، اسپکیولاریت، کالکوپیریت، هماتیت، لیمونیت، گوتیت و مالاکیت دیده شده است. ژئوشیمی ماده‌ معدنی گویای حضور عناصر Si, Al, Ca, Mg, Ti و نیز عناصر کالکوفیل Cu, Zn, As, Pb و به‌ دلیل همراهی کانی‌های کالک‌سیلیکاتی و کانی‌های سولفیدی با مگنتیت است. میانبارهای سیال دمای همگن‌شدگی میان 2/153 تا 3/338 درجه سانتی‌گراد و شوری از 827/0 تا 36/25 درصد وزنی نمک طعام دارند. در مرحله کانی‌سازی آمیختگی سیال‎های ماگمایی با آب‌های جوی در مرحله متاسوماتیسم پسرونده رخ داده است. مقدار δ18O کانی مگنتیت میان 46/0- تا 31/2+ ‰ و مقدار δ18Owater سیال مولد کانی‌سازی میان 1/8+ تا 9/10+ ‰ متغیر است. این مقدار مشابه با سیال‎های ماگمایی متعادل شده با منبع دارای 18O بالاست. مقدار δ34S در کانی پیریت ماده‌ معدنی میان 3/7+ تا 5/12+ ‰ و مقدار δ34SH2S سیال مولد کانی‌سازی میان 7/5+ تا 9/10+ ‰ است. این مقادیر مثبت دخالت منشأ سولفات‌های تبخیری را در تأمین گوگرد نشان می‌دهد. در مرحله دگرگونی پسرونده فلزات تحرک یافته همراه با سیال‎های فلزدار حاصل از سرد شدن توده‌ نفوذی با آب‌های جوی سولفوردار مخلوط شده و در سنگ‌آهک‌های کرتاسه دارای فضای خالی ساختاری کانی‌سازی اسکارن کلسیک آهن تخت را به وجود آورده است.}, keywords_fa = {Iron,Calcic skarn,Fluid inclusion,Stable isotope,Takht deposit}, url = {http://www.gsjournal.ir/article_63797.html}, eprint = {http://www.gsjournal.ir/article_63797_5c725d4098b06dd8e914f5f40c1e2d54.pdf} } @article { author = {Morsali, M. and Nakhaie, M. and Rezaie, M. and Naseri, H. R. and Hassanpour, J.}, title = {The comparison of effective variables and methods in water inflow into hard rock tunnels (Case study: Karaj dam-Tehran water conveyance tunnel)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {113-122}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63799}, abstract = {Tehran- Karaj water conveyance tunnel (part 1), 16 kilometers in length, in the Karaj formation was excavated in order to convey the water from the Amir-Kabir dam to the Tehran refinery plant. The hydrogeology studies of the Karaj tunnel were done to discover the affecting parameters on the groundwater inflow into the tunnel. Groundwater inflow was estimated by means of empirical and analytical methods. Daily measurements of inflow rate show that there are some differences between the calculated and the observed inflow value. In this research, based on the comparison between the observed and calculated groundwater inflow, some relations have been derived for similar hydrogeological conditions. In many hydrogeological conditions, the analytical equations are supervised on empirical formula. According to this research, addition to permeability and water head; geological structure, Precipitation and bedding dip have a significant effect in water inflow into tunnels. Also, most of groundwater inflow along the Karaj tunnel is largely related to the main geological features, such as folds, faults, dykes and open fractures and inflow is correlated with precipitation.}, keywords = {Groundwater inflow,Empirical and analytical methods,Hydrogeological parameters,Geological structures,Tunnel,Iran}, title_fa = {مقایسه روش‌ها و متغیرهای مؤثر در آب ورودی به تونل‌های سازندهای سخت، تونل انتقال آب سد کرج به تهران}, abstract_fa = {بخش اول تونل انتقال آب کرج به طول 16 کیلومتر برای انتقال آب از سد امیرکبیر به تصفیه‌خانه تهران در سازند کرج حفاری شد. برای برآورد میزان نفوذ آب به درون تونل­ها، روش­ها و روابط متفاوتی وجود دارد. ورود آب به تونل توسط روش‌های تحلیلی و تجربی برآورد شد و اندازه‌گیری روزانه آب واقعی ورودی به تونل اختلافاتی را با این روش‌ها نشان داد. در این پژوهش، بر پایه مقایسه میان ارقام واقعی و پیش‌بینی‌های صورت گرفته، روابطی برای شرایط مشابه آب‌زمین‌شناختی ارایه شد. روش‌های تحلیلی، ارقام بالاتری را نسبت به پیش‌بینی‌ها نشان دادند که بر پایه این مطالعات، افزون بر نفوذپذیری و بار آبی که در این روش‌ها وجود دارد؛ ساختارهای زمین‌شناسی، بارش و شیب لایه‌ها در ورود آب زیرزمینی به تونل مؤثرند. بیشترین حجم ورود آب به تونل کرج در ساختارهای زمین‌شناسی همچون چین‌ها، گسل‌ها، دایک‌ها و درزه‌های باز صورت گرفته که در بیشتر مواقع نیز انطباق زمانی قابل‌ توجهی با بارندگی‌ها داشته است.}, keywords_fa = {Groundwater inflow,Empirical and analytical methods,Hydrogeological parameters,Geological structures,Tunnel,Iran}, url = {http://www.gsjournal.ir/article_63799.html}, eprint = {http://www.gsjournal.ir/article_63799_4e5c21c19424a203760107534f5d025b.pdf} } @article { author = {Ghasemi, H. and Rostami Hossuri, M. and Sadeghian, M.}, title = {Basic magmatism in the extentional back-arc basin of the Lower-Middle Jurassic on the Northern edge of Central Iran-South of Eastern Alborz zones, Shahrood-Damghan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {123-136}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63800}, abstract = {The Lower Jurassic basin of northern margin of central Iran structural zone and south of eastern Alborz in Semnan province, contains igneous rocks with basic composition, belonging to early stages of occurrence and development of an immature extensional back arc basin at this time. These basic igneous rocks cropped out in at the base of Shemshak Formation and its equivalent in central Iran Structural zone, in the form of extrusive (basaltic rocks) and intrusive (dike, sill and microgabbroic small stocks) rocks. Magma forming of these rocks have had calc – alkaline nature and was enriched in large ion lithophile elements (LILE) and light rare earth elements (LREE) and also was depleted in heavy rare earth elements (HREE). The mentioned magmas was, originated from 5 to 30% partial melting of the spinel peridotitic (below the central Iran) and garnet lherzolithic (below the Eastern Alborz) mantle plumes in an immature extensional back arc basin tectonic setting due to oblique subduction of Nneothetyan oceanic lithosphere beneath the central Iran structural zone at late Triassic to middle Jurassic time, and were ascending to upper levels of continental crust by fault and fracture systems and emplaced in shallow sedimentary basins of these zones in different ways. This basin was formed in the behind of the upper Triassic – Lower Jurassic magmatic arc of central Iran and due to initiation of extensional movements in the continental crust of central Iran and Alborz.}, keywords = {Magmatism,Extentional Basin,Back-arc,Jurassic,Central Iran,Eastern Alborz}, title_fa = {فعالیت ماگمایی بازی در حوضه کششی پشت کمانی ژوراسیک زیرین- میانی در لبه شمالی پهنه‎های ایران مرکزی- جنوب البرز خاوری، شاهرود- دامغان}, abstract_fa = {حوضه ژوراسیک لبه شمالی پهنه ساختاری ایران ­مرکزی و جنوب البرز خاوری در استان سمنان، دربردارنده سنگ­های آذرین با ترکیب بازی متعلق به مراحل اولیه پیدایش و گسترش یک حوضه کششی پشت ­کمانی نابالغ در این زمان است. این سنگ­های آذرین بازی، به هر دو شکل خروجی (بازالتی) و نفوذی (دایک، سیل و استوک­های کوچک میکروگابرویی) در توالی رسوبی بخش زیرین سازند شمشک و معادل آن در پهنه ساختاری ایران مرکزی رخنمون دارند. ماگماهای سازنده این سنگ­ها دارای ماهیت کالک‎آلکالن هستند و از عناصر سنگ‌دوست بزرگ‌یون (LILE) و عناصر خاکی کمیاب سبک (LREE) غنی­شدگی، و از عناصر خاکی کمیاب سنگین (HREE) تهی­شدگی نشان می­دهند. این ماگماها، از ذوب بخشی 5 تا 30 درصدی ستون­های گوشته­ای اسپینل ­پریدوتیتی (در زیر ایران مرکزی) و گارنت ­لرزولیتی (در زیر البرز خاوری)، در یک جایگاه زمین­ساختی کششی پشت­کمانی نابالغ، ناشی از فرورانش مایل سنگ‌کره اقیانوسی نوتتیس به زیر ایران مرکزی در تریاس بالایی- ژوراسیک میانی حاصل شده و از راه سامانه­های شکستگی و گسلش، به ترازهای بالاتر پوسته قاره­ای رفته و به روش­های مختلف درون حوضه­های رسوبی کم­ژرفای این پهنه­ها جایگزین شده­اند. این حوضه، در پشت­کمان ماگمایی تریاس بالایی- ژوراسیک زیرین ایران مرکزی و در نتیجه بروز حرکات کششی در پوسته قاره­ای ایران مرکزی- البرز تشکیل شده است.  }, keywords_fa = {Magmatism,Extentional Basin,Back-arc,Jurassic,Central Iran,Eastern Alborz}, url = {http://www.gsjournal.ir/article_63800.html}, eprint = {http://www.gsjournal.ir/article_63800_25e2c2f9651f31c3978e2343167ff7a9.pdf} } @article { author = {Hadavandkhani, N. and Sadeghi, A. and Adabi, M. H. and Tahmasbi, A. R.}, title = {Lithostratigraphy and biostratigraphy of the Pabdeh Formation at Chahardeh village section (Izeh zone, Khuzestan province)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {137-150}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63802}, abstract = {The Pabdeh Formation with a thickness of 797.2 m. and 4 lithological units (purple shale (144.25 m.), lower limestone and marl (221.75 m.), limestone (73.5 m.) and upper limestone and marl (357.7 m.) is stretched at Chahardeh village stratigraphic section in Izeh zone.. Biostratigraphic studies led to recognition of 30 genera and 150 species of planktonic foraminifera based on which 23 biozones were identified in Tethys realm. These biozones  are well correlated with biozones of Tethys region. Based on the indicated biozones and fossil contents, the age of the Pabdeh Formation is Middle Paleocene (Selandian) - Late Oligocene (Chattian). In this study, Paleocene- Eocene boundary is located in Purple shale unit and Eocene- Oligocene boundary is placed in upper marl and limestone unit.}, keywords = {Pabdeh Formation,Paleocene,Oligocene,Biostratigraphy,Lithostratigraphy}, title_fa = {سنگ‎چینه‎نگاری و زیست‎چینه‎نگاری سازند پابده در برش روستای چهارده (پهنه ایذه، خوزستان)}, abstract_fa = {سازند پابده با ستبرای 2/797 متر و 4 واحد سنگی (واحد شیل ارغوانی (25/144 متر)، واحد مارن و آهک پایینی (75/221 متر)، آهکی (5/73 متر) و واحد مارن و آهک بالایی (7/357 متر)) در برش روستای چهارده در پهنه ایذه گسترش دارد. بر پایه مطالعات زیست‎چینه‌نگاری سازند پابده، ضمن تشخیص 150 گونه متعلق به 30 جنس از روزن‌بران، 23 زون زیستی در این سازند بر پایه زون­بندی­های زیستی جدید در محدوده تتیس شناسایی و معرفی شده است که زون­های تعریف شده در سازند پابده پهنه ایذه تطابق خوبی با زون­های تعریف شده در محدوده تتیس دارند. بر پایه مجموعه فسیلی و زون­های زیستی شناسایی شده، سن سازند پابده در برش مورد مطالعه پالئوسن میانی (سلاندین)- الیگوسن پسین (شاتین) تعیین شده است. مرز پالئوسن- ائوسن در برش مورد مطالعه در واحد شیل ارغوانی سازند پابده و مرز ائوسن- الیگوسن در برش روستای چهارده پهنه ایذه در واحد مارن و آهک بالایی سازند پابده جای دارد.}, keywords_fa = {Pabdeh Formation,Paleocene,Oligocene,Biostratigraphy,Lithostratigraphy}, url = {http://www.gsjournal.ir/article_63802.html}, eprint = {http://www.gsjournal.ir/article_63802_699a514e10375b42d980c8c6a52f5c79.pdf} } @article { author = {Keshtkar, E. and Ghorbani, M. and Omrani, J.}, title = {Petrology, geochemistry and mineral chemistry of Parachan intrusive body (North of Karaj)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {151-164}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63804}, abstract = {A gabbro to monzonite sill is injected into the Karaj tuffs at the north of Parachan village, North of Karaj.. The main minerals of these rocks are plagioclase, pyroxene, K feldspar, olivine and biotite. Clinopyroxene mineral chemistry studies carried out on the intrusive bodies, indicate two types of diopside and augite clinopyroxene composition. The chemical composition of the pyroxenes shows that these rocks have been crystallized in a subduction geological setting. The average crystallization temperature of clinopyroxenes is about 1120 to 1170 °C, and it seems that clinopyroxenes crystallized at lower temperature than orthopyroxenes. Plagioclase composition in these rocks is variable, changing from andesine to labradorite. K feldspars are in the orthoclase range and olivine are hyalosiderite. Biotite is one of the most prominent ferromagnesian minerals in the studied bodies. Compositionally, it is plotted between the fields of annite and siderophyllite. Most of these biotites are primary magmatic and some are plotted in the re-equilibrated filed. Petrological evidence represent that fractional crystallization from gabbro to monzonite had main role in genesis of these rocks. Enrichment in LILE) Ba, Rb and Th(and also depletion in HFSE (Nb and Ti) in Rare Earth Elements distribution pattern in spider diagrams, indicate features of subduction-related rocks. Also they are enriched in LREE rather than HREE, the characteristic which is usually observed in the rocks from subduction environments and active continental margins. Chemical and petrological studies, indicate role of fractional crystallization in the evolution of magma, although, minor amounts of assimilation and contamination of magma by crustal rocks occurred. This alkaline magma has been formed by low degree of partial melting of an enriched sub-continental lithospheric garnet-lherzolite mantle source.}, keywords = {Parachan,Gabbro,Monzonite,Karaj formation,Subduction zone}, title_fa = {سنگ شناسی، ژئوشیمی و شیمی کانی توده نفوذی پراچان (شمال کرج)}, abstract_fa = {در شمال روستای پراچان (شمال کرج)، سیلی با ترکیب گابرو تا مونزونیت به درون توف­های کرج تزریق شده است. مجموعه کانی­های تشکیل دهنده این توده شامل پلاژیوکلاز، پیروکسن، آلکالی­فلدسپار، الیوین و بیوتیت است. مطالعات شیمی کانی­ انجام شده روی کلینوپیروکسن­های موجود در­ سنگ­های توده­ نفوذی بیانگر حضور دو نوع کلینوپیروکسن با ترکیب دیوپسید و اوژیت است. ترکیب شیمیایی پیروکسن­ها بیانگر شکل­گیری آنها در محیط مرتبط با فرورانش است. میانگین دمای تبلور کلینوپیروکسن­ها حدود 1120 تا 1170 درجه سانتی­گراد ارزیابی شده است و به نظر می­رسد که کلینوپیروکسن­ها در دمای پایین­تری نسبت به ارتوپیروکسن­ها شکل گرفته باشند. ترکیب پلاژیوکلاز این سنگ­ها متغیر است و از آندزین تا لابرادوریت تغییر می­کند. همچنین آلکالی­فلدسپارها در محدوده ارتوکلاز و الیوین­ها در محدوده هیالوسیدریت جای می­گیرند. بیوتیت یکی از شاخص­ترین کانی­های فرومنیزین در سنگ­های مورد مطالعه است که از دید ترکیبی میان قطب آنیت و سیدروفیلیت جای گرفته و از نوع بیوتیت­های غنی از منیزیم است. بیشتر این بیوتیت­ها از نوع ماگمایی اولیه هستند و بخشی از آنها در محدوده بیوتیت­های دوباره متعادل شده جانمایی می‎شوند. شواهد سنگ­شناسی نشان می­دهد که در تکوین سنگ­های منطقه، فرایند تفریق از گابرو به مونزنیت نقش اصلی را داشته است. غنی­شدگی LILE (Ba، Rb و Th) و همچنین افت عناصر HFSE و (Nb و Ti) در الگوی توزیع عناصر کمیاب از نمودارهای عنکبوتی، ویژگی­ سنگ­های وابسته به محیط فرورانش را نشان می­دهد. همچنین در این نمودارها LREE نسبت به HREE دارای غنی­شدگی است که این ویژگی­ها نیز در سنگ­های مناطق فرورانش و حواشی فعال قاره­ای دیده می­شود. مطالعات ژئوشیمیایی و پتروژنزی انجام شده، بیانگر نقش تبلور تفریقی همراه با هضم و آلایش ماگما با سنگ­های پوسته­ای، در تحول ماگمای سازنده سنگ­های مزبور است. این ماگما از ذوب­بخشی درجه­ی پایین یک منبع گوشته­ای غنی شده زیر سنگ­کره قاره­ای با ترکیب گارنت- لرزولیت حاصل شده­ است.  }, keywords_fa = {Parachan,Gabbro,Monzonite,Karaj formation,Subduction zone}, url = {http://www.gsjournal.ir/article_63804.html}, eprint = {http://www.gsjournal.ir/article_63804_ec184cc39f138d57a39c3ce3677cf420.pdf} } @article { author = {Ghaderi, A. and Taheri, J. and Kerachian, A. and Mousavinia, A.}, title = {Lithostratigraphy and biostratigraphy of the Silurian sequence at Robat-e-Qarebil stratigraphic section, based on conodonts}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {165-172}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63813}, abstract = {Investigation of Silurian succession equivalent to the Niur Formation at the northwest of Robat-e-Qarebil (instantly south of Western Kopeh-Dagh), is led to introduction of lithostratigraphical units in details and identification of some Llandovery conodonts. The sampled interval in this stratigraphic section is composed of shale, fossiliferous limestone, sandstone, and dolomite with 295.5 meter thickness. With a marine volcanic rock unit at the base, this succession is conformably overlaid shales and sandstones attributed to the Ordovician system and overlain by quartzarenite and red shales of the Padeha Formation. Obtained conodonts from these sequences comprise different coniform, ramiform and pectiniform elements. Nineteen species of 10 genera belong to Aspelundia expansa Interval Zone which confirms uppermost Late Rhuddanian to Aeronian for the section. This age coincides with the ages which have already been given on the basis of brachiopods, cephalopods and palinomorphs for the same outcrops at the Western Kopeh-Dagh.}, keywords = {Silurian,Conodont,Robat-e-Qarebil,Biozone,Niur Formation}, title_fa = {سنگ‎چینه‏ نگاری و زیست‎چینه‎نگاری توالی‎های سیلورین در برش چینه‎شناسی رباط قره‌بیل بر پایه کنودونت‎ها}, abstract_fa = {بررسی چینه‌هایرسوبی سیلورین معادل با سازند نیور در شمال باختری رباط قره­بیل، باختر بجنورد (جنوب بلافصل کپه‌داغ باختری)، افزون بر تهیه ستون چینه‌شناسی و معرفی دقیق واحدهای سنگ‌چینه‌ایبه شناسایی شماری از کنودونت‌های لاندوری انجامیده است. چینه‌هایبرداشت شده از این برش چینه‎‌شناسی با ستبرای 5/295 متر و سنگ‌شناسی چیره شیل، سنگ‌آهک سنگواره­دار، ماسه‌سنگ و دولومیت، با گذر همشیب و به واسطه یک واحد آتشفشانی زیردریایی، روی شیل‌ها و ماسه‌سنگ‌های منتسب به اردوویسین جای گرفته است و خود توسط ماسه‎سنگ‎های کوارتزآرنایتی و شیل‌های سرخ رنگ معادل با سازند پادها پوشیده می­شوند. کنودونت‌های به دست آمده از این چینه‌هاکه شامل عناصر مخروطی، میله­ای و صفحه­ای متعلق به 19 گونه از 10 جنس مختلف هستند، حضور زیست‌زون بینابینی Aspelundia expansa را تأیید می‌کنند و شاخص بخش بالایی اشکوب رودانین تا آئرونین هستند. این بازه زمانی همخوانی خوبی با سن ارائه شده توسط بازوپایان، پابرسران و پالینومورف‌هایی دارد که پیش از این از توالی‌های مشابه در باختر کپه‌داغ معرفی شده بودند.}, keywords_fa = {Silurian,Conodont,Robat-e-Qarebil,Biozone,Niur Formation}, url = {http://www.gsjournal.ir/article_63813.html}, eprint = {http://www.gsjournal.ir/article_63813_35b3b6a4122dcf6a8f75999090eaa09c.pdf} } @article { author = {Najafzadeh, A. R.}, title = {Using noble metal and mineral chemistry of peridotites in petrogenesis and tectonic setting of Rudan ultramafic complex, Kerman, Southern Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {173-184}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63818}, abstract = {The Rudan ultramafic complex with Paleozoic age is located in Southern Kerman province and is composed mainly of massive harzburgite, small to medium sized lenticular dunite and subordinate very thin olivine websterite dykes. Granular and protogranular are the main textures in dunites and harzburgites, and orthopyroxene, olivine and to a lesser extent clinopyroxene and chromian spinel were found in the harzburgites and dunites. The forsterite content of olivine is slightly higher in dunites (Fo92.5) than those in harzburgites (Fo91). Detailed electron microprobe study reveals intermediate Cr# (0.33-0.56), relatively high Mg# (0.59-0.75) and very low TiO2 content (averaging 0.01 wt %) for chromian spinels in Rudan peridotites. The Fe3+# is very low, (s in the peridotites are very low (average 25 ppb) and are highly depleted in PGE contents relative to chondrites. The PGE spidergrams in dunites are unfractionated, and the PdN/IrN ratios averages 1.02, whereas the harzburgites show slightly positive slopes PGE spidergrams, together with a small positive Ru, Pd and Au anomalies, and their PdN/IrN ratio averages 2.75. Moreover, the PGE chondrite and primitive mantle normalized patterns of the harzburgites  are relatively flat which are comparable to the depleted mantle peridotites indicating relatively high degree of partial melting (about 17-22%) of the mantle source. The mineral chemistry data and the noble metal geochemistry indicates that the harzburgites of the Rudan ultramafic complex are residual and dunites are replaced and tectonically have been generated in a fore-arc mantle region above a supra-subduction zone setting.}, keywords = {Supra-subduction zone,Noble metals,Rudan ultramafic complex,Kerman,Southern Iran}, title_fa = {استفاده از ژئوشیمی فلزات نوبل و ترکیب کانی‌شناسی پریدوتیت‌ها در تعیین پتروژنز و جایگاه زمین‎ساختی کمپلکس فرا‌بازی رودان کرمان، جنوب ایران}, abstract_fa = {کمپلکس فرابازی رودان به سن پالئوزوییک در منتهی‌الیه جنوب استان کرمان جای گرفته و از هارزبورژیت‌های توده‌‌‌ای (massive)، عدسی‌های کوچک تا متوسط دونیتی و مقادیر بسیار کمی از دایک‌های باریک الیوین وبستریتی با درجه سرپانتینی شدن متوسط تشکیل یافته است. بافت گرانولار و پروتوگرانولار از جمله بافت‎های چیره در هارزبورژیت‌ها و دونیت‌هاست و الیوین، ارتوپیروکسن و به میزان بسیار کمتری کلینوپیروکسن و کروم‌اسپینل از جمله کانی‌های موجود در این سنگ‌ها به شمار می‌آیند. مقدار فورستریت الیوین موجود در دونیت‌ها (Fo92.5) در مقایسه با هارزبورژیت‌ها (Fo91) کمی بالاتر است. مطالعات میکروپروب انجام شده در زمینه کروم‌اسپینل‌های موجود در پریدوتیت‌های رودان مقادیر متوسط Cr# (33/0 تا 56/0)، مقادیر به نسبت بالای Mg# (59/0 تا 75/0) و مقادیر بسیار پایین TiO2 (متوسط 01/0 درصد وزنی) را نشان می‌دهد. مقدار Fe3+# در کروم‌اسپینل‌های موجود در پریدوتیت‌های کمپلکس رودان بسیار پایین (09/0> درصد وزنی) و منعکس‌کننده تبلور در شرایط فوگاسیته پایین اکسیژن است. همچنین، بیشتر پریدوتیت‌های رودان از عناصر خاکی کمیاب (REE) به شدت تهی شده‌اند. در پریدوتیت‌های کمپلکس رودان، مجموع عناصر گروه پلاتین بسیار پایین (متوسط  ppb25) است و در مقایسه با کندریت‌ها بسیار تهی شده‌اند. الگوی PGE در دونیت‌ها تفریق نیافته و نسبت PdN/IrN در این سنگ‌ها به‎طور میانگین 02/1 است. در حالی که هارزبورژیت‌ها کمی شیب مثبت به همراه بی‌هنجاری مثبت کوچکی از Ru، Pd و Au نشان می‌دهند و نسبت PdN/IrN در آنها بیش از 75/2 است. همچنین، الگوهای PGE بهنجار شده با کندریت و گوشته اولیه در هارزبورژیت‌های کمپلکس رودان به نسبت پهن است که قابل مقایسه با پریدوتیت‌های گوشته‌ای تهی‌ شده‌ هستند و درجات به نسبت بالای ذوب بخشی (17 تا 22 درصد) منبع گوشته‌ای را نشان می‌دهند. داده‌های شیمی کانی و ژئوشیمی فلزات نوبل نشان از آن دارد که هارزبورژیت‌های کمپلکس فرابازی رودان ماهیت تفاله‌ای و دونیت‌ها ماهیت جانشینی دارند و از دید زمین‌ساختی در یک محیط جلوی کمان در بالای پهنه بالای مناطق فرورانش به وجود آمده‎اند.}, keywords_fa = {Supra-subduction zone,Noble metals,Rudan ultramafic complex,Kerman,Southern Iran}, url = {http://www.gsjournal.ir/article_63818.html}, eprint = {http://www.gsjournal.ir/article_63818_b5f953d4db7217e7a7d79e676e088dc2.pdf} } @article { author = {Mahdizadeh, H. and Djamour, Y.}, title = {The Feasibility of Replacing Precise Levelling with GPS In Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {185-192}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63819}, abstract = {Today, with the use of Global Positioning System (GPS), it is possible to determine the geodetic height (relative to a Reference Ellipsoid) in easy mode with less time and cost. Despite of some advantages for leveling with GPS (GPS/Levelling) relative to traditional leveling, there is an important limitation which indicates the difference between Ellipsoid (as the reference datum for geodetic height) and Geoid (as the reference datum for orthometric height) named geoidal height. In order to achieve maximum accuracy in height component and then evaluating the quality results, different aspects of GPS/Levelling are considered in this study. In order to study the Feasibility of replacing precise levelling with GPS in Iran, a part of 55 km physical geodesy and geodynamic network in Azerbaijan region as well as the dense geodetic multipurpose network in Qeshm island were used. Based on different distances between each couple of points, this information, consisting of Orthometric and Geodetic heights for each point, is classified in 5 groups. The last Geoid model of Iran (IRGeoid10) with an absolute average accuracy of ±26 cm and a relative average accuracy of ±2.8 ppm are used for geoidal height. Obtained results show the accuracy of leveling height difference with GPS would be reduced by increasing the length of baseline. Index K as a criterion for determining level degree was calculated. This index shows that levelling with GPS in Iran could provide a precision of 4th degree leveling which can serve many engineering applications.}, keywords = {Geoid,Orthometric height,Geodetic height,GPS,levelling with GPS}, title_fa = {مطالعه امکان‌سنجی جایگزینی ترازیابی دقیق با GPS/Levelling در منطقه ایران}, abstract_fa = {امروزه با گسترش استفاده از سامانه تعیین موقعیت جهانی (GPS) این امکان فراهم شده که بتوان ارتفاع ژئودتیک هر نقطه را نسبت به بیضوی مرجع به سادگی با کمترین زمان و هزینه تعیین کرد. با وجود مزایای روش نوین ترازیابی با GPS در برابر ترازیابی سنتی، دسترسی به ارتفاع ارتومتریک نقاط با این روش محدودیت‎هایی دارد. نکته اساسی در این خصوص وجود اختلاف میان سطح مبنای ارتفاعی ترازیابی سنتی (ژئویید) و سطح مبنای ارتفاعی GPS (بیضوی) است که باید اثر آن در ترازیابی‌های نسبی مورد توجه قرار گیرد. در این پژوهش به جنبه‎های مختلف روش ترازیابی با GPS برای کسب بیشترین دقت در مؤلفه ارتفاعی و مقایسه این روش (ترازیابی با GPS) با ترازیابی هندسی (یا ترازیابی سنتی) پرداخته می‎شود. برای بررسی و مطالعه ترازیابی با GPS و میزان دقت قابل حصول، از اطلاعات شبکه 55 کیلومتری فیزیکال ژئودزی و شبکه ژئودینامیک ایران در منطقه آذربایجان و اطلاعات نقاط ژئودزی جزیره قشم استفاده شده است. این اطلاعات در برگیرنده ارتفاعات ارتومتریک و ژئودتیک شبکه نقاط مورد استفاده است که در این پژوهش در 5 دسته با فواصل مختلف تقسیم و انتخاب شده‎اند. برای محاسبه ارتفاع ژئویید از آخرین مدل ژئویید ملی جاذبی ایران (IRGeoid10) با دقت مطلق متوسط cm 26± و دقت نسبی متوسط ppm 8/2± استفاده شده است. نتایج حاصل بیانگر کاهش دقت اختلاف ارتفاع ترازیابی با GPS بر حسب افزایش طول خطوط مبناست. محاسبه متغیر k به عنوان معیاری برای تشخیص درجه ترازیابی، نشان می­دهد که در حال حاضر ترازیابی با GPS در ایران دقتی معادل ترازیابی درجه 4 فراهم می‎سازد.}, keywords_fa = {Geoid,Orthometric height,Geodetic height,GPS,levelling with GPS}, url = {http://www.gsjournal.ir/article_63819.html}, eprint = {http://www.gsjournal.ir/article_63819_4f5554bbd35f54adb19b4213d2891b99.pdf} } @article { author = {Ebrahimi, Mohammad Reza and Tatar, Mohammad}, title = {Weight induced-stress of the Gotvand-e Olya reservoir on the Golestan Fault}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {193-202}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2017.87186.1113}, abstract = {Impoundment of a reservoir and changes in the lake levels can trigger / induce the seismicity. In this research, the strength changes are modeled across the Golestan fault, due to loading effect of Gotvand-e Olya reservoir which is located in the Zagros Mountain of SW Iran. The formulas based on 3D Boussinesq solutions were used to calculate normal and shear stresses on a given fault plane. Geometry and mechanism of the Golestan fault were precisely determined using local earthquakes recorded by a local seismological network. For a better analysis, we did the calculations in three different dips of 55, 60 and 65 degrees for the Golestan fault. Since the lake is located on the hanging wall of the Golestan fault, it is expected that loading effect of the reservoir causes delay on occurrence of earthquakes and make the fault more stable. Analysis of induced stresses confirms this too, the results in all dips in most parts of the fault from 7 km to 20 km depth, which are in closer distance to the reservoir, indicate on stabilization. Only in a small part of the fault, located at shallow depths between 5 and 7 km, the destabilizing effect is observed. The calculated strengths, which leads to destabilizing the Golestan fault ranges between -0.243 bars and 0. The observed seismicity in vicinity of the Golestan fault for before and after the impoundment confirms the the results of stress modelling in different parts of the fault.}, keywords = {Stress,Dam reservoir,Induced Seismicity,Golestan fault,Zagros}, title_fa = {مدل‌سازی تنش القایی ناشی از وزن دریاچه گتوند علیا بر روی گسل گلستان}, abstract_fa = {بارگذاری یک مخزن و تغییرات سطح آب دریاچه می‌تواند منجر به القا / چکانش زمین‌لرزه‌ها‌ گردد. در این پژوهش تغییرات پایداری در طول گسل گلستان در نتیجه آبگیری مخزن سد گتوند علیا، که در رشته کوه‌های زاگرس در جنوب غرب ایران قرار دارد، مدل‌سازی شده است. فرمول‌بندی‌‌هایی بر پایه راه حل‌های سه بعدی بوسینسک برای محاسبه تنش‌های نرمال و برشی بر روی یک صفحه گسل مشخص، استفاده شد. هندسه و مکانیزم گسل گلستان با دقت بالائی با استفاده از زمین‌لرزه‌های ثبت شده توسط یک شبکه لرزه‌نگاری محلی مشخص شد. برای تحلیل بهتر نتایج، محاسبات در سه شیب متفاوت 55، 60 و 65 درجه برای گسل گلستان انجام شد. از آنجاییکه دریاچه بر روی فرادیواره گسل رورانده گلستان قرار دارد، بنابراین انتظار می‌رود که بارگذاری مخزن بر روی این گسل موجب پایداری بیشتر گسل و تاخیر در وقوع زمین‌لرزه‌ها گردد. این امر به خوبی در تحلیل تنش‌های ناشی از مخزن بر روی این گسل مشهود و نتایج حاصله در تمامی شیب‌های یاد شده در قسمت‌های عمیق گسل از 7 تا 20 کیلومتر که نزدیکتر به دریاچه هستند، حاکی از پایداری این گسل است. تنها در بخش کوچکی از این گسل و در اعماق کم بین 5 تا 7 کیلومتر، شاهد ناپایداری آن هستیم. توان برشی محاسبه شده ناشی از مخزن که موجب ناپایداری آن می‌شود بین 243/0- و صفر بار برآورد شده است. لرزه‌خیزی مشاهده شده در گستره گسل گلستان قبل و بعد از آبگیری مخزن، نتایج حاصل از مدل‌سازی تنش را در نقاط مختلف گسل تایید می‌کند.}, keywords_fa = {Stress,Dam reservoir,Induced Seismicity,Golestan fault,Zagros}, url = {http://www.gsjournal.ir/article_47392.html}, eprint = {http://www.gsjournal.ir/article_47392_8cc8c5850fccd8648362561efabb61a7.pdf} } @article { author = {SoltaniNezhad, M. and Ahmadi Pour, H. and Moradian, A. and Zaboli Sarvtamin, B.}, title = {Chromite chemistry as an approach to the origin of the north-east of Hadji Abad ultramafic massif, Hormozgan province}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {203-214}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63824}, abstract = {The Hadji-Abad ultramafic complex is located at the north of Hormozgan province and represents a part of Orzuieh-Dowlat Abad colouredmelange in the northern edge of Zagros thrust. The complex contains harzburgites, lherzolites, dunites and chromitites. Harzburgite is the dominant rock type. Evidence such as lobateboundaries, elongation of chromianspinels and pyroxenes, evidence for incongruent melting of orthopyroxenes and exsolution lamellae of clinopyroxenes show that the studied peridotites, experienced high temperature deformation in the upper mantle, and then emplaced in the crust. Different amounts and various shapes of chromite grains occur in all of the studied lithological units. In the harzburgites and lherzolites, disseminated brown chromites are seen as either euhedral isolated crystals or anhedral interstitial ones which crystallized between the other minerals. In the dunites, chromites appear as disseminated black euhedral and subhedral crystal grains which formed within or at the boundaries of olivine grains. In the high grade chromitites, the coarse black euhedralchromites show smooth and triple junction boundaries with cumulative textures, while in the low grade types, disseminated euhedralchromites set in a silicate matrix. Chemical analysis of disseminated chromites in the studied rocks show that maximum amounts of Cr# belong to those exist in the high grade chromitites (80-84) and the minimum are for those in the lherzolites (45-52). Tectonic discrimination diagrams reveal that chemical compositions of chrome spinels from the harzburgites and lherzolites are similar to those exist in the suprasubduction zone mantle peridotites. The host rocks as a part of ophiolites in this environment, suffered 15 to 20% partial melting. Disseminated chrome spinels from the dunite and also the chromitites have been crystallized from boninitic type melts in the same tectonic setting. These evidence show that probably, Hadji-Abad peridotites and their host ophiolitemelange belong to suprasubduction zone upper mantle and the evolutions related to this environment such as melt-peridotite reaction and partial melting have been recorded in their mineral chemistry and textures. }, keywords = {Ultramafic,Chromite,Chromitite,Suprasubduction zone,Hadjiabad,Hormozgan}, title_fa = {شیمی کرومیت، رهیافتی به منشأ توده اولترامافیکی شمال خاور حاجی‌آباد، استان هرمزگان}, abstract_fa = {مجموعه اولترامافیک حاجی‎آباد در شمال استان هرمزگان، جزیی از نوار آمیزه رنگین ارزوییه- دولت‌آباد است و در لبه شمالی راندگی زاگرس جای دارد. این مجموعه شامل هارزبورژیت، لرزولیت، دونیت و کرومیتیت است و هارزبورژیت­ها، بیشترین حجم سنگ­ها را به خود اختصاص داده‌اند. شواهدی همچون مرزهای منحنی، کشیدگی کروم‌اسپینل­ها و پیروکسن­ها، شواهد ذوب نامتجانس ارتوپیروکسن و وجود تیغه­های جدایشی کلینوپیروکسن، نشان می‌دهد که سنگ­های این مجموعه، ابتدا دگرشکلی­های دمای بالای گوشته بالایی را تحمل کرده و سپس در پوسته جایگزین شده‌اند. در همه واحدهای سنگی مجموعه می‌توان کانی کرومیت را به مقادیر و اشکال مختلف دید. در هارزبورژیت­ها و لرزولیت­ها، بلورهای قهوه‌ای و پراکنده کرومیت، یا به شکل منفرد و شکل‌دار دیده می‌شوند و یا به‌صورت بی‌شکل و میان‌دانه‌ای در میان کانی‌های دیگر هستند. در دونیت­ها نیز این کانی به‎صورت بلورهای شکل‌دار تا نیمه‌شکل‌دار سیاه رنگ و به‌طور پراکنده درون الیوین­ها یا در مرز آنها متبلور شده‌اند. در کرومیتیت­های پرعیار منطقه، بلورهای درشت، شکل‌دار و سیاه رنگ کرومیت، بافت­های انباشتی دارند؛ مرز آنها بیشتر صاف است و مرز اتصال سه گانه دارند؛ اما در کرومیتیت­های کم‌عیار، کرومیت­ها، پراکنده و شکل‌دار هستند و در یک زمینه سیلیکاتی قرار گرفته‎اند. بررسی شیمی بلورهای کرومیت در سنگ­های منطقه نشان می‌دهد که در این بلورها، بیشترین مقدار Cr# به کرومیت­های موجود در کرومیتیت­های پر عیار (80-84) و کمترین مقدار آن نیز به انواع موجود در لرزولیت­ها (45-52) تعلق دارد. استفاده از نمودارهای تشخیص محیط زمین‌ساختی، نشان می‌دهد که ترکیب شیمیایی کرومیت­های پراکنده موجود در هارزبورژیت­ها و لرزولیت­های مجموعه حاجی‎آباد، به انواع موجود در پریدوتیت­های گوشته‌ای منطقه بالای فرورانش شباهت دارد و سنگ­های میزبان، به عنوان بخشی از افیولیت­های وابسته به این محیط، دچار 15 تا 20 درصد ذوب بخشی شده‌اند. کرومیت­های پراکنده موجود در دونیت­ها و کرومیتیت­های منطقه نیز در همین محیط زمین‌ساختی و در اثر تبلور مذاب­های بونینیتی به وجود آمده‌اند. این شواهد بیانگر آن است که احتمالاً پریدوتیت­های حاجی‎آباد و آمیزه افیولیتی میزبان، به بخش­هایی از گوشته بالایی در بالای یک منطقه فرورانش، تعلق دارند و تحولات مربوط به این منطقه، همچون واکنش مذاب- پریدوتیت و ذوب بخشی، در ترکیب کانی­ها و بافت آنها ثبت شده است.}, keywords_fa = {Ultramafic,Chromite,Chromitite,Suprasubduction zone,Hadjiabad,Hormozgan}, url = {http://www.gsjournal.ir/article_63824.html}, eprint = {http://www.gsjournal.ir/article_63824_5e39b843fea6ac84dc45782991cc7631.pdf} } @article { author = {Dashti Chandanagh, S. and Sheikholeslami, M. R. and Taheri, J.}, title = {Finite strain analysis and vorticity estimation in the metamorphic rocks around Mashhad}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {215-220}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63826}, abstract = {This study was conducted to determine the deformation pattern of the Mashhad metamorphic rocks which results from the convergence between Turan and Central Iran plates and closure of Paleotethys Ocean during Early Cimmerian event. The results of 2D and 3D strain analysis show that the maximum deformation is concentrated in the central part of the study area and most strain shape parameters (K) obtained from oriented samples are located within the flattening part of the Flinn diagram. Strain intensity parameter in most cases is less than 0.5 and a maximum strain occurred in the central part which is reduced towards the margins. This is the most characteristic of the typical shear zones in which, the maximum strain is concentrated on the central part. Calculated vorticity numbers is ranged between 0.2 to 1 indicating the presence of both pure shear and simple shear during a transpressional regional deformation. }, keywords = {Binalud,deformation,Strain,Vorticity}, title_fa = {تحلیل واتنش پایدار و برآورد تاوایی در سنگ‌های دگرگون اطراف مشهد}, abstract_fa = {این پژوهش به منظور بررسی دگرشکلی اعمال شده بر سنگ­های دگرگون مشهد، طی همگرایی صفحات توران و ایران مرکزی و بسته شدن اقیانوس تتیس کهن و ایجاد رویداد سیمرین پیشین انجام شده است. نتایج حاصل از تحلیل دوبعدی و سه‌بعدی واتنش پایدار نشان می­دهد که بیشینه دگرشکلی در بخش مرکزی ناحیه روی داده و متغیر شکل بیضوی واتنش که بر پایه نمودار فلین و از روی جهت دار به دست آمده است؛ بیشتر در ناحیه پخ‎شدگی قرار دارد (K≤1). متغیر شدت واتنش در بیشتر نمونه­ها کمتر از 5/0 و واتنش بیشینه در بخش‌های مرکزی  ناحیه روی می‌دهد و به سوی حاشیه کاهش می­یابد. این ویژگی از ویژگی­های آشکار بیشتر پهنه­های برشی است که در آنها واتنش بیشینه در بخش­های مرکزی تمرکز می­یابد. عدد تاوایی به دست آمده میان 2/0 تا 1 است که نشان­دهنده حضور مؤلفه برش ساده و برش محض در جریان دگرشکلی ترافشارشی است.}, keywords_fa = {Binalud,deformation,Strain,Vorticity}, url = {http://www.gsjournal.ir/article_63826.html}, eprint = {http://www.gsjournal.ir/article_63826_f28ea8263237553364678932140f5c85.pdf} } @article { author = {Yavari, A. and Ghavidel syooki, M. and Majidifard, M. R. and Vaziri, S. H.}, title = {Description and biostratigraphy of the ammonite fauna from the Kazhdumi Formation at Tang-e-Maghar, Northwest of Behbahan (Zagros Basin)}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {221-232}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63827}, abstract = {The Kazhdumi Formation is well exposed and accessible in Tang-e Maghar, northwest of  Behbahan city, Zagros basin. In this area, this formation has a thicknees of 344 m and it mainly consists of alternation of black - gray shale with medium – thin-bedded cream – gray argillaceous limestone. The lower contact of the Kazhdumi Formation is disconformable with Daryan Formation and conformable with the Sarvack Formation at the top. A total of 220 ammonite bearing surface samples were collected including the uppermost part of the Daryan Formation (5m) and the whole thickness of the Kazhdumi Formation (344m). This investigation resulted in 21 species (15 genera) which belong to six families. The encountered  ammonite species of the upper part of the Daryan Formation and the whole Kazhdumi Formation consist of Douvilleiceras sp., Douvilleiceras cf. mammillatum, Epicheloniceras subnodosocostum– buxtorfi, Hypacanithoplites cf. elegnas, Acanthohoplites cf. aschiltaensis, Nolaniceras nolani, Parahoplites cf. melchioris, Venezoliceras sp., Venezoliceras cf. venezolanum, Mirapelia cf. buarquianum, Mirapelia sp., Oxytropidoceras carbonarium, Oxytropidoceras cf. roissyanum, Hysteroceras cf. orbignyi, Hysteroceras sp., Tonohamites cf. aequicingulatus, Mortoniceras sp., Mortoniceras aff. inflatum, Dufrenoyia sp., Hemiptychoceras cf. gaultinum and Scaphites sp.Amongst these ammonite species, Scaphites sp. and Hemiptychoceras gaultinum are recorded for the first time and the remainder has previously been recorded from  this rock unit in the Zagros basin. Likewise, based on stratigraphic potential of the encountered ammonite species the lower Aptian is suggested for the upper part of the Daryan Formation and upper Aptian –upper Albian for the Kazhdumi Formation.Therefore, a hiatus is present between the Daryan and Kazhdumi formations, encompassing the middle Aptian.  }, keywords = {Kazhdumi Formation,Biostratigraphy,Ammonite,Tang-e Maghar,Zagros Basin}, title_fa = {توصیف و زیست‌چینه‌نگاری آمو نیت‌های سازند کژدمی، برش چینه‌شناسی تنگ ماغر شمال باختر بهبهان (حوضه زاگرس)}, abstract_fa = {سازند کژدمی در تنگ ماغر در شمال باختر شهرستان بهبهان (حوضه زاگرس)، به خوبی بیرون زده و قابل دسترسی است. این سازند در ناحیه مورد مطالعه 344 متر ستبرا دارد که از تناوب شیل‎های خاکستری با آهک‌های نازک‌لایه کرم رنگ تا قهوه‌ای تشکیل شده است. در این ناحیه سازند کژدمی با ناهمسازی فرسایشی روی سازند داریان و به‌طور همساز زیر سازند سروک جای می‌گیرد. در این مطالعه 220 نمونه دارای آمونیت تهیه شد که 5 متر از بخش بالایی سازند داریان و همه ستبرای (344متر) سازند کژدمی را دربر می‌گیرد. روی هم رفته 15 جنس و 21 گونه متعلق به 6 خانواده به شرح زیر در این مطالعه شناسایی شد : Douvilleiceras sp., Douvilleiceras cf. mammillatum, Epicheloniceras subnodosocostum– buxtorfi, Hypacanthoplites cf. elegnas, Acanthohoplites cf. aschiltaensis, Nolaniceras nolani, Parahoplites cf. melchioris, Venezoliceras sp., Venezoliceras cf. venezolanum, Mirapelia cf. buarquianum, Mirapelia sp., Oxytropidoceras carbonarium, Oxytropidoceras cf. roissyanum, Hysteroceras cf. orbignyi, Hysteroceras sp., Tonohamites cf. aequicingulatus, Mortoniceras sp., Mortoniceras aff. inflatum, Dufrenoyia sp., Hemiptychoceras cf. gaultinum, Scaphites sp. همه جنس‎ها و گونه‎های یاد شده به جز Scaphites sp. و Hemiptychoceras cf. gaultinum در مطالعات پیشین از این سازند گزارش شده‌اند. بر پایه انتشار چینه‎شناسی گونه‌های مختلف آمونیت، 11 زیست‌زون در این سازند شناسایی شد که زمان آپتین پیشین را برای بخش بالایی سازند داریان و آپسین پسین تا آلبین پسین را برای سازند کژدمی پیشنهاد می‎کند. بنابراین به نظر می‌رسد که یک نبود چینه‎شناسی میان سازندهای داریان و کژدمی وجود دارد که آپسین میانی را دربر می‎گیرد.}, keywords_fa = {Kazhdumi Formation,Biostratigraphy,Ammonite,Tang-e Maghar,Zagros Basin}, url = {http://www.gsjournal.ir/article_63827.html}, eprint = {http://www.gsjournal.ir/article_63827_b67ccb04657e7b5d955c4648bf8c1576.pdf} } @article { author = {Sameti, B. and Zia Zarif, A. and Jafari, M. R. and Darvishzadeh, A.}, title = {Introducing iron mineralization anomaly based on geophysical data in Farash area, Kerman province}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {233-240}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63831}, abstract = {The study area is located in Farash 1:50000 sheet in Kerman province, at a distance of about 50 kilometers from the Jiroft-Darb Behesht road in the Jebalbarez zone. The study area is located in Bam 1:250000 sheet in the Sanandaj-Sirjan structural zone. Rock units include granite, granodiorite and volcano-sedimentary rocks combined with tuff, nummulite limestone, conglomerate and agglomerate. Due to intrusion of igneous rocks in the southern part of limestone and tuff, iron skarn mineralization is occurred. Using processing and interpretation of 1030 data ground magnetic survey with lines space of 25 meters and preparing maps of magnetic intensity and using data layers such as geological and tectonic maps, areas with potential mineralization of iron ore were introduced. After field control, it was cleared that the main outcrops of iron ore are concentrated in the central parts of the South East. The main host iron ore are skarn and granite in the middle part of the area. Trend of mineralization is NW-SE and main minerals of iron are magnetite and hematite. Iron mineralization are also occurred in zones of argillic and propylitic alteration.}, keywords = {Farash,Geophysics,Iron mineralization,Argillic alteration}, title_fa = {معرفی مناطق بی‎هنجاری کانی‌سازی آهن بر پایه داده‌های ژئوفیزیکی در محدوده فراش استان کرمان}, abstract_fa = {منطقه مورد مطالعه در برگه فراش (از برگه‌های استاندارد نقشه‌برداری با مقیاس یک پنجاه هزارم) در استان کرمان، در فاصله 50 کیلومتری جاده آسفالته جیرفت- درب بهشت و در پهنه جبال بارز جای دارد. منطقه مورد مطالعه در برگه استاندارد نقشه‍برداری با مقیاس یک دویست و پنجاه هزارم به نام بم قرار دارد. واحدهای سنگی منطقه شامل واحدهای نفوذی گرانیتی، گرانودیوریتی و واحدهای آتشفشانی رسوبی با ترکیب توف، آهک نومولیتی، کنگلومرا و آگلومراست. در بخش جنوبی محدوده فراش نفوذ سنگ‌های آذرین با ترکیب اسیدی در مجاورت واحدهای آهکی و توفی سبب کانه‌زایی اسکارن آهن شده‌اند. با استفاده از پردازش و تفسیر  1030 داده ژئوفیزیک مغناطیس‌سنجی زمینی با فواصل خطوط برداشت 25 متری و رسم نقشه‌های شدت میدان مغناطیسی، همچنین با استفاده از لایه‌های اطلاعاتی دیگر مانند نقشه‌های زمین‌شناسی و زمین‌ساختی منطقه، مناطق دارای پتانسیل کانی‌زایی فلزی معرفی شدند و پس از کنترل صحرایی معلوم شد که رخنمون‌های اصلی سنگ آهن در بخش‎های مرکزی به سوی جنوب خاور تمرکز یافته‌اند. میزبان اصلی سنگ آهن، در بخش مرکزی محدوده درون واحدهای اسکارنی و گرانیتی قرار دارند. روند کانی‌سازی شمال باختری- جنوب خاوری و کانی‌های اصلی آهن، مگنتیت و هماتیت هستند. در مناطق کانه‌زایی آهن دگرسانی‌های آرژیلیکی و پروپیلیتیکی نیز رخ داده  است.}, keywords_fa = {Farash,Geophysics,Iron mineralization,Argillic alteration}, url = {http://www.gsjournal.ir/article_63831.html}, eprint = {http://www.gsjournal.ir/article_63831_29d569a2ef05d7ee0299f7340e2ec419.pdf} } @article { author = {Asadi Mehmandosti, E. and Alivand, Sh. and Ghalavand, H. and Rostami, A. R.}, title = {Petrophysical assessment of the Ilam carbonate reservoir by integration of Nuclear Magnetic Resonance (NMR) method and core data in one of the Abadan plain oil fields}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {241-252}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63834}, abstract = {Nuclear magnetic resonance (NMR) is a test method that has had basic influence on the accuracy of reservoir parameters prediction. In this study, petrophysical properties of the Ilam Formation in one oil field of the Abadan plain were investigated by Nuclear magnetic resonance method, and core analysis and thin sections data were used to validate the test results for the first time. The Nuclear magnetic resonance method was used to determine reservoir parameters such as porosity, permeability and rebuilding of capillary pressure curve in studied oil field. Correlation between petrophysical results of Nuclear magnetic resonance method, core data and microscopic thin sections indicates effectiveness of this method in determining the reservoir parameters. In addition, evaluation of the Ilam Formation carbonate with NMR method indicates that the studied reservoir at depths of 2890 to 2846 m has suitable reservoir quality in terms of hydrocarbon storages in studied oil field in Abadan plain.}, keywords = {Nuclear magnetic resonance method,Capillary pressure,porosity,Ilam Formation,Abadan plain}, title_fa = {بررسی پتروفیزیکی مخزن کربناته ایلام با استفاده از روش تشدید مغناطیس هسته‎ای (NMR) و داده‎های مغزه در یکی از میادین نفتی دشت آبادان}, abstract_fa = {تشدید مغناطیس هسته‎ای (NMR) روشی است که در بهبود دقیق پارامتر‎های مهم مخزنی نقش اساسی داشته است. در این مطالعه برای اولین بار خواص پتروفیزیکی سازند کربناته ایلام در یکی از میادین نفتی دشت آبادان با روش تشدید مغناطیس هسته‎ای بررسی و به منظور اعتبار سنجی از داده‎های مغزه و مقاطع نازک میکروسکوپی استفاده شده است. روش تشدید مغناطیس هسته‎ای، کمک به تعیین پارامترهای مهم مخزنی سازند ایلام از جمله تخلخل، تراوایی و بازسازی منحنی فشار موئینه در میدان نفتی مورد مطالعه نموده است. تطابق نتایج پتروفیزیکی حاصل از روش تشدید مغناطیس هسته‌ای با داده‌های مغزه و مطالعه مقاطع نازک میکروسکوپی، نشان‎دهنده کارآمد بودن این روش در تعیین پارامترهای مهم مخزنی است. علاوه‎ بر این، نتایج ارزیابی سازند کربناته ایلام با روش تشدید مغناطیس هسته‎ای نشان می‎دهد که مخزن مورد مطالعه در اعماق 2846 تا 2890 متری در میدان نفتی مورد بررسی در دشت آبادان کیفیت مخزنی مناسب برای ذخیره هیدروکربن دارد.}, keywords_fa = {Nuclear magnetic resonance method,Capillary pressure,porosity,Ilam Formation,Abadan plain}, url = {http://www.gsjournal.ir/article_63834.html}, eprint = {http://www.gsjournal.ir/article_63834_0f117893a1a4c3e1c4a7aad463a33698.pdf} } @article { author = {Tabatabaei Manesh, S. M. and Javadi, F. and Zohouri2, F. S}, title = {Mineral chemistry and petrogenesis of East Nabar skarn, Southwest of Kashan}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {253-264}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63836}, abstract = {The Nabar skarn is located about 35 km southwest of Kashan and within the Urumieh- Dokhtar magmatic belt  and is formed along the contact between limestone of Qom formation with a probably middle to upper Miocene intermediate and basic intrusion body. The main minerals forming this skarn are garnet, clinopyroxene, epidote and accessory minerals are vesuvianite, chlorite, tremolite- actinolite, sphene, quartz and calcite. Ore minerals are pyrrhotite, pyrite with smaller amounts of chalcopyrite, sphalerite and magnetite. According to the presence of magnesium minerals like diopside and calcium minerals such as garnet, vasuvianite and epidote the type of host rock is probably calcite-dolomite. Skarn formation and mineralization in this region was occurred during three development stages. Presence of high temperature anhydrous minerals such as grossular and diopside specifies the formation of the first Stage in these rocks. Stage 2 is associated with the formation of andradite and sphene.  Stage 3 is specified by replacement of anhydrous minerals at temperatures below 470 ° C by hydrous minerals such as tremolite-actinolite, epidote, chlorite and vesuvianite.}, keywords = {Oligo-Miocene,Calcium-magnesium skarn,East of Nabar,Urumieh-Dokhtar}, title_fa = {مینرال‎شیمی و پتروژنز اسکارن خاور نابر، جنوب باختر کاشان}, abstract_fa = {اسکارن نابر در حدود 35 کیلومتری جنوب باختر کاشان و در کمان ماگمایی ارومیه- دختر قرار دارد. اسکارن‎سازی در این منطقه در مجاورت سنگ‌آهک سازند قم به سن الیگومیوسن و توده نفوذی با سن احتمالی میوسن میانی- بالایی شکل گرفته است. کانی‌های سازنده اصلی این اسکارن‌ها شامل گارنت، کلینوپیروکسن، اپیدوت و کانی‌های فرعی شامل وزوویانیت، کلریت، ترمولیت- اکتینولیت، اسفن، کوارتز و کلسیت و کانه‌های همراه شامل پیروتیت، پیریت، به همراه مقادیر کمتر کالکوپیریت، اسفالریت و مگنتیت هستند. با توجه به حضور فراوان مجموعه کانی‌های منیزیم‌دار مانند دیوپسید و کانی‎های کلسیم‌دار مانند گارنت، وزوویانیت و اپیدوت وجود سنگ میزبان از نوع کلسیتی- دولومیتی می‌تواند بسیار محتمل باشد. برای تشکیل اسکارن و توسعه کانی‎زایی در این منطقه 3 مرحله پیشنهاد می‌شود: مرحله 1 که با تشکیل کانی‎های بی‎آب دما بالایی همچون گارنت (گروسولار) و دیوپسید مشخص شده است. مرحله 2 که با تشکیل کانی‎های آندرادیت و اسفن همراه است. در مرحله 3 جایگزینی کانی‎های بی‎آب توسط مجموعه‌های آب‎دار در دمای کمتر از 470 درجه سانتی‎گراد انجام می‎گیرد. در این مرحله کانی‎هایی همچون ترمولیت- اکتینولیت، اپیدوت، کلریت و وزوویانیت تشکیل می‌شود. کانه‌زایی مربوط به فاز تأخیری تشکیل اسکارن بوده و تحت تأثیر سیال‎های گرمابی رخ داده است.  }, keywords_fa = {Oligo-Miocene,Calcium-magnesium skarn,East of Nabar,Urumieh-Dokhtar}, url = {http://www.gsjournal.ir/article_63836.html}, eprint = {http://www.gsjournal.ir/article_63836_7d1451c5905203ebd62a2ecef249c154.pdf} } @article { author = {Vaez-Javadi, F.}, title = {Dinoflagellate palynostratigraphy of middle Jurassic of the Hojedk Formation, Tabas, Central-East Iran and its correlation to other Palynomorph zones in Iran and elsewhere}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {265-276}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63837}, abstract = {Hojedk Formation spreads well through the Tabas Block. Diverse and moderately preserved palynofloras occur in the Middle Jurassic sediments of the formation in south Kouchekali, southwest of Tabas, central-east Iran. The present investigation of the Hojedk Formation has revealed a diverse assemblage of dinoflagellate cysts in which 12 species allocated to 5 genera. Two acritachs were also recognized, permitting establishment of  Nannoceratopsis triceras-Pareodinia ceratophora Assemblage zone, and Nannoceratopsis gracilis Total Rane Subzone in the upper part, lower and upper boundaries have been identified by the first and last observed occurrence (LOO) of these index species. These biozones are comparable to the other palynozones in Iran and elsewhere especially in the northern hemisphere (Greenland, Norway, Scotland, England, and Poland). Occurrence of various species of Nannoceratopsis is concluded that this locality was located at the south palaeocoastal line of the Tabas Block during the Aalenian-Bajocian.}, keywords = {Dinoflagellate cysts,Middle Jurassic,Biostratigraphy,Hojedk Formation,Tabas}, title_fa = {زیست‏چینه‎نگاری داینوفلاژله های ژوراسیک میانی سازند هجدک در کوچکعلی جنوبی، طبس و تطابق آن با دیگر زیست‎زون های پالینومورفی هم ارز}, abstract_fa = {سازند هجدک گسترش خوبی در محدوده کفه طبس دارد. پالینوفلورای گوناگون و به نسبت حفظ شده­ای در سازند هجدک چاه شماره 210 اکتشافی زغال‌سنگ منطقه کوچکعلی جنوبی در جنوب باختر طبس وجود دارد. این پژوهش بر پایه سیست‌داینوفلاژله­ها صورت گرفت؛ به‌طوری که 12 گونه داینوسیست متعلق به 5 جنس و 2 گونه اکریتارک شناسایی شد. بر پایه اولین و آخرین حضور دیده شده (LOO, FOO) گونه­های شاخص داینوفلاژله، یک زیست‌زون تجمعی به نام Nannoceratopsis triceras-Pareodinia ceratophora Assemblage Zone شناسایی شد. همچنین، یک زیرزیست‎زون Nannoceratopsis gracilis Total Range Subzone در بخش بالایی سازند هجدک تشخیص داده شد. این زیست‌زون­ها قابل تطابق با مناطق مختلف ایران و جهان به­ویژه در نیمکره شمالی هستند. حضور گونه­های گوناگون Nannoceratopsis در این منطقه از کوچکعلی جنوبی نشان‌دهنده مرز ساحل جنوبی دیرینه کفه طبس در خلال آالنین- باژوسین بوده است.}, keywords_fa = {Dinoflagellate cysts,Middle Jurassic,Biostratigraphy,Hojedk Formation,Tabas}, url = {http://www.gsjournal.ir/article_63837.html}, eprint = {http://www.gsjournal.ir/article_63837_7e7e45d27793de30d566d29ed4856f03.pdf} } @article { author = {Alishavandi, Z. and Rahimpour-Bonab, H. and Kadkhodaei, A. and Arian, M.}, title = {Investigating the effects of sedimentary environment and diagenetic processes on the quality of Sarvak reservoir formation within a sequence stratigraphic framework, Kupal Oil Field}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {277-286}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63844}, abstract = {The Sarvak Formation deposited in the North to Northeastern margin of the Arabian Platform during the Mid-Cretaceous (Albian-Turonian), and is extensively encountered in the Folded Zagros of southwestern Iran. It is the most important reservoir unit after Asmari Formation in Iran. Petrography of microscopic thin sections in studied wells led to determination of nine microfacies that deposited in 3 sub-environments; restricted lagoon, lagoon-open marine and shoal in an interior part of carbonate ramp. Petrographic studies revealed that since deposition, the Sarvak Formation experienced several diagenetic realms including  marine, meteoric, burial and telogenetic diagenetic environments. Location of the studied wells shows that the relative depth of the Sarvak Formation ramp decreases from the east to the west. Also, the results show that the Sarvak reservoir quality affected by various diagenetic processes such as micritization, dissolution, dolomitization, cementation, stilolitization and fracturing. These diagenetic successions are mainly restricted to the upper and lower parts of the Cenomanian-Turonian disconformity. Meteoric water infiltration below this disconform boundary and related karstification led to development of moldic and vuggy porosity a long with reservoir quality increase. Based on the sequence stratigraphic study, three third-order sequences were recognized in the middle Cenomanian to middle Turonian part of the formation. The results of this research show that the reservoir quality distribution in this unit is primarily controlled by depositional facies so that the rudist microfacies (grainstone, floatstones and rudstones) have the best primary reservoir qualities though, it has also been drastically improved by dissolution in paleoexposure surface}, keywords = {Sarvak Formation,Kupal Oilfield,Diagenesis,Sedimentary Environment,Sequence Stratigraphy}, title_fa = {بررسی تأثیر محیط رسوبی و فرایندهای دیاژنزی بر کیفیت مخزنی سازند سروک در چارچوب چینه‌نگاری سکانسی، میدان نفتی کوپال}, abstract_fa = {سازند سروک، واحد کربناته ستبری است که در بخش شمال خاوری سکوی عربی در کرتاسه میانی تشکیل شده است و در حوضه زاگرس چین‎خورده گسترش زیادی دارد. پس از سازند آسماری دومین سنگ مخزن مهم میدان­های نفتی مناطق جنوبی و جنوب باختر ایران به شمار می­رود که بخش قابل توجهی از ذخایر هیدروکربنی را میزبانی می‌کند. سنگ‌نگاری مقاطع نازک میکروسکوپی این سازند در چاه­های مورد مطالعه، به شناسایی 8 ریزرخساره انجامید که در 3 زیرمحیط تالاب محدود شده، تالاب-­ دریای باز و پشته زیر­آبی، در بخش­های داخلی یک سکوی کربناته روقاره­ای نهشته شده­اند. با توجه به موقعیت چاه­ها­ی مورد مطالعه­، در میدان نفتی کوپال، از خاور به باختر، حوضه ژرف­تر شده است. همچنین بر پایه یافته‌های این مطالعه، فرایندهای دیاژنزی مهمی شامل میکریتی شدن، انحلال، دولومیتی شدن، سیمانی شدن، استیلولیتی شدن، نوشکلی و شکستگی، کربنات­های این سازند را تحت تأثیر قرار داده­اند. توالی دیاژنزی این سازند مربوط به دو بخش بالا و پایین مرز سنومانین- تورونین است. نفوذ آب­های جوی در زیر مرز سنومانین- تورونین و تأثیر فرایند انحلال سبب گسترش تخلخل حفره­ای و قالبی و در نتیجه موجب بالا رفتن پتانسیل مخزنی این بخش شده است.  بررسی‎های چینه‎نگاری سکانسی به شناسایی 3 سکانس رسوبی رده سوم انجامیده است.}, keywords_fa = {Sarvak Formation,Kupal Oilfield,Diagenesis,Sedimentary Environment,Sequence Stratigraphy}, url = {http://www.gsjournal.ir/article_63844.html}, eprint = {http://www.gsjournal.ir/article_63844_6732d9d1d21ecceaa01b80222115429a.pdf} } @article { author = {Peernajmodin, H. and Rastad, E. and Rajabi, A.}, title = {Ore structural, textural, mineralogical and fluid inclusions studies of the Kouh-Kolangeh Zn-Pb-Ba deposit, Malayer- Isfahan metallogenic belt, South Arak, Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {27}, number = {107}, pages = {287-302}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.63856}, abstract = {The Kouh-Kolangeh carbonate-hosted Zn-Pb-Ba deposit is hosted by Lower Cretaceous detrital-carbonate sequence in the central part of the Malayer-Isfahan metallogenic belt (MEMB) and has been formed within an extensional basin. Ore mineralization occurred as concordant with layering in the upper part of non- argillic massive orbitolina gray limestone (Kl) and at the boundary of shale- marl with intercalated thin bedded limestone unit (Ks) with Aptian age. Sulfide minerals include sphalerite, galena and pyrite. Barite is the most abundant non-sulfide mineral associated with quartz, calcite and dolomite. Ore textures and structures include breccia, replacement, vein-veinlets, massive barite and laminated ore. Silicification and carbonatation (calcification- dolomitization) are the main wall-rock alterations. Based on fluid inclusion studies, fluid inclusions can be divided into two types: (I) two-phase fluid inclusions (T1) with amoebic and irregular shapes and average homogenization temperature of (T1) 206.8°C and the average salinity of 8.3 wt% NaCl. (II) CO2-rich three-phase fluid inclusions (LCO2-LH2O-VCO2) (T II) with spherical shapes and average total homogenization temperature of (T1) 234.8°C and the average salinity of 7.17 wt% NaCl. According to evidence such as tectonic setting, type of host rock, layered geometry of deposit, ore textures and structures, homogenization temperature, average salinity and presence of massive barite, the Kouh Kolangeh deposit can be considered as an Irish-type Zn- Pb deposit.}, keywords = {}, title_fa = {ساخت و بافت، کانی‌شناسی و مطالعه میانبارهای سیال کانسار روی- سرب – باریت کوه‌کلنگه، کمربند فلززایی ملایر- اصفهان، جنوب اراک}, abstract_fa = {کانسار روی- سرب- باریت کوه­کلنگه با سنگ میزبان کربناته در توالی آواری- کربناته کرتاسه زیرین حوضه جنوب اراک و در بخش میانی کمربند فلززایی ملایر- اصفهان در حوضه کششی پشت کمانی تشکیل شده است. کانه­زایی به‌صورت هم­روند با لایه‎بندی در بخش بالایی سنگ‌آهک خاکستری اربیتولین‎دار (واحد Kl) در زیر واحد شیل- مارن با میان‎لایه سنگ‎آهک نازک لایه (واحد Ks) به سن آپسین رخ داده است. کانی‌های سولفیدی شامل اسفالریت، گالن و پیریت هستند و فراوان‌ترین کانی غیر سولفیدی باریت است که با کوارتز، کلسیت و دولومیت همراهی می‎شود. ساخت و بافت ماده معدنی به‌صورت برشی، جانشینی، رگه- رگچه­ای، لامینه- پراکنده و باریت توده­ای همراه با سولفید است. دگرسانی‌های سیلیسی­­- کربناتی شدن (کلسیتی- دولومیتی) اصلی­ترین دگرسانی‌های همراه با کانه­زایی به شمار می­روند. میانبارهای سیال مطالعه شده در کانسار را می­توان به دو نوع تقسیم کرد. میانبارهای نوع اول، دوفازی غنی از مایع با شکل‌های کروی و بیضوی و آمیبی، میانگین دمای همگن‎شدگی آنها 8/206 درجه سانتی‌گراد و میانگین درجه شوری 3/8 درصد وزنی معادل NaCl و میانبارهای نوع دوم، سه‎‌فازی (دو فاز مایع آب و CO2 و یک فاز بخار) با شکل‌های کروی و بیضوی، میانگین دمای همگن‎شدگی 8/234 درجه سانتی‌گراد و میانگین درجه شوری 17/7 درصد وزنی معادل NaCl  هستند. با توجه به نتایج مطالعات صورت گرفته و بر پایه محیط زمین­ساختی، نوع سنگ میزبان، شکل لایه­ای کانسار، ساخت و بافت ماده معدنی، دمای همگن‎شدگی و درجه شوری میانبارهای سیال و رخداد باریت توده­ای، می­توان کانسار کوه­کلنگه را مشابه با کانسارهای روی- سرب- باریت نوع ایرلندی در نظر گرفت.}, keywords_fa = {}, url = {http://www.gsjournal.ir/article_63856.html}, eprint = {http://www.gsjournal.ir/article_63856_1b1400fff68870d17dbe54c258952f4f.pdf} }