@article { author = {Mehdizadeh farsad, kambiz and Jahani, davood and hajian, alireza and Rezaei, Fereidoun}, title = {Modeling hydraulic fracture in a petroleum well using a finite element approach for enhanced oil recovery}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {29}, number = {114}, pages = {35-40}, year = {2020}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2018.152368.1549}, abstract = {Hydraulic fracture is known as one of the effective methods for producing or being caused a change in the physical structure of a reservoir rock. In oil and gas reservoirs which have been fractured by a hydraulic approach, this method causes that a production well and the time of reservoir production increase. In this research, fracture analysis have been comprised with the outputs produced by previous models. Its results show that the opening intersection produced by hydraulic fracture has been being changed in various time during pumpage, therefore, the fracture should be kept open by propanent substances. In the next stage, the amount of porosity pressure in the trend of the fracture is considered. In this survey, two parameters, i.e. the fracture measure and the change of pore pressure have been obtained using the hydraulic fracture modeled process under the actual condition of pay zone and its confining layers, and by the finite element approach. In this method, pumping processing has been assigned for fluid and propanent. At the end, by making a comparison between these result and the results obtained from previous studies, it can be found out that this approach is applicable and efficient.}, keywords = {"Hydraulic Fracture","Finite element","Modeling"}, title_fa = {مدلسازی شکست هیدرولیکی در چاه نفت با روش اجزای محدود به منظور افزایش ازدیاد برداشت}, abstract_fa = {شکست هیدرولیک به عنوان یکی از روش های موثر و کاربردی است که باعث افزایش تولید می گردد در مخازن نفتی و گازی که این روش به کارگیری می شود میزان تولید به صورت مستقیم به میزان و نحوه گسترش شکستگی بستگی دارد. در این پژوهش، تحلیل رفتار شکستگی ها و بررسی میزان شکستگی با خروجی مدل‌های قبلی مقایسه شده و نتایج آن نشان می دهد که پس از تزریق و پمپاژ گسترش و بازشدگی شکستگی ها در حال تغییر است. در مرحله بعدی نکته مهم میزان فشار تخلخلی در طول شکستگی است که باید مورد بررسی و تحلیل قرار گیرد. در این روش با در نظر گرفتن دو پارامتر تغییر فشار منفذی در طول شکستگی ها و میزان شکست از طریق عملیات مدلسازی تحت شرایط واقعی سازند بهره ده به روش اجزای محدود انجام گردید. در این روش از ابتدا نحوه تزریق و پمپاژ پروپانت را در نظر گرفته شد و در نهایت مقایسه نتایج با روش ها و مطالعات قبلی بیانگر کاربردی بودن این روش خواهد بود.}, keywords_fa = {"شکست هیدرولیک","اجزای محدود","مدلسازی"}, url = {http://www.gsjournal.ir/article_102917.html}, eprint = {http://www.gsjournal.ir/article_102917_9c26c38a01aac54801c3ce40e5c56777.pdf} }