@article { author = {Ramzani, Ali and Meshinchi Asl, Mir Sattar and Oveisy Moakhar, Mohsen}, title = {Imaging karst aquifers by combining deep electrical resistivity tomography with magnetic surveys, a case study of the Quchan area, NE Iran}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {28}, number = {109}, pages = {265-272}, year = {2018}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2017.86124.1106}, abstract = {Geophysical surveys have been carried out to characterize the structure and to better understand the karstic water reservoirs in the Quchan area. Deep 2-D resistivity tomography and magnetic method have been used to detect the most promising zones for new water-well siting. Magnetic method has a common usage in the interpretation of the tectonic framework, faults and fractures that are triggering parameters of karstification phenomena. Therefore a high resolution magnetic survey was carried out as the first detection approach at selected sites in the studied region with the aim of probable buried fault exploration for karstic zone detection. The geomagnetic results detect magnetic anomalies in NW-SE direction agreed with the known faults system in the area. As the second approach, a Deep Electrical Resistivity Tomography (DERT) process has been designed according to magnetic results. Tree sections of 2-D electrical tomography using the Wenner-Schlumberger array has been carried out along a survey line of 100 m and an investigation depth of about 250 m with resolution of 5 m. The 2-D inversion modeling provides suitable information about the exploration targets and essential geological formations. The studies illustrate that low resistivity areas on the sections related to karstic zones. We used this combination of geophysical methods in this study to prove that these geological phenomena can be detected by such quick, economic and confident sequence of geophysical methods.}, keywords = {karst,Magnetic method,Electrical Resistivity Tomography,Wenner-Schlumberger array}, title_fa = {اکتشاف منابع آب کارستیک با ترکیب روش‌های مغناطیس سنجی و توموگرافی الکتریکی عمیق، مطالعه موردی منطقه زوباران، شمال شرقی ایران}, abstract_fa = {روش­های ژئوفیزیک برای مطالعات منابع آب کارستی و فهم بهتر ارتباط تکتونیک منطقه با پدیده کارستی شدن، در روستای زوباران از توابع شهر قوچان و در داخل آهک­های سازند تیرگان انجام شد. روش­های مغناطیس‌سنجی کاربردهای گسترده­ای در اکتشاف گسل­ها و شکستگی­ها دارد. گسل­ها به عنوان یکی از فاکتورهای فعال کننده پدیده کارستی شدن مورد توجه هستند.  در مرحله اول مطالعات مغناطیس‌سنجی زمینی با رزولوشن بالا خطوارهای مغناطیسی را در منطقه آشکارسازی کردند. در مرحله بعد مطالعات توموگرافی الکتریکی عمیق، بر اساس نتایج مرحله اول انجام شد. سه مقطع توموگرافی الکتریکی دوبعدی با آرایش الکترودی ونر- شلومبرگر و حداکثر عمق اکتشافی 250 متر به صورت عمود بر گسل­های احتمالی (به دست آمده از نتایج مغناطیس‌سنجی) برداشت شد. ابتدا با مدل‌سازی معکوس دوبعدی داده­های مقاومت ویژه الکتریکی و سپس با نرم‌افزارهای درون­یابی، نمایش سه‌بعدی انجام شد. نتایج مطالعات نشان‌دهنده 2 منطقه با مقاومت الکتریکی پایین است که مربوط به زون­های خرد شده یا انحلالی هستند و موقعیت آنها با گسل­های اکتشاف شده در مرحله قبل مطابقت دارد. در این مطالعه هدف معرفی و صحت‌سنجی یک فرایند اکتشافی بهینه در مطالعات منابع آب کارستی است. در مرحله اول مغناطیس‌سنجی به عنوان یک روش سریع و ارزان‌قیمت انجام و موقعیت زون­های مستعد احتمالی با دقت بالایی تعیین می­شود. در مرحله دوم مطالعات دقیق توموگرافی الکتریکی با صرف زمان و هزینه بالاتر در زون­های مستعد متمرکز و عمق و نحوه گسترش نواحی کارستی شده آشکارسازی می­شود.}, keywords_fa = {کارست,مغناطیس سنجی,توموگرافی الکتریکی,آرایش الکترودی ونر- شلومبرگر}, url = {http://www.gsjournal.ir/article_68688.html}, eprint = {http://www.gsjournal.ir/article_68688_e614930d6f2ab3a8f7090c347b8dc26f.pdf} }