@article { author = {Hormozzade, F. and Baniassadi, M. and Sahabi, F. and Izadi, H. and Memarian, H.}, title = {Investigation of the carbonate rock permeability based on medical x-ray tomography images}, journal = {Scientific Quarterly Journal of Geosciences}, volume = {28}, number = {110}, pages = {193-200}, year = {2019}, publisher = {Geological Survey of Iran}, issn = {1023-7429}, eissn = {2645-4963}, doi = {10.22071/gsj.2019.84442}, abstract = {The determination of Petrophysical rock properties has always been an important part of geological modeling and also is used in reservoir engineering studies. Permeability (k) is one of the most important properties of porous media which is the measure of a porous material to allow fluids to pass through it. Permeability can be determined from both experimental tests and numerical simulations. Numerical simulations should be performed on geometries determined from advanced imaging techniques. Digital rock physics (DRP) is an approach for studying rocks nondestructively. In this paper, 10 carbonate rock plugs from the oil fields in South-West of Iran were imaged by medical CT scan and the outputs were used for image processing and permeability determination. We evaluated the use of Navier-Stokes equations to perform fluid flow simulation through the pore spaces geometry. The permeability of the samples were calculated and compared with laboratory-derived values. The results indicated a trend between the permeability values reported by the laboratory and medical CT images with R2=90%.}, keywords = {Permeability,Digital Rock Physics,Fluid Flow,X-Ray Tomography,Pore space geometry}, title_fa = {اندازه گیری تراوایی با استفاده از توموگرافی پرتو ایکس پزشکی در یکی از میادین جنوب باختر ایران}, abstract_fa = {تراوایی یکی از مهم­ترین خواص محیط متخلخل و بیانگر توانایی سازند در عبور دادن سیالات و همچنین کنترل­کننده حرکت­های جهت­دار و دبی جریان سیالات در مخزن است. روش­های آزمایشگاهی مختلفی برای اندازه­گیری مقدار تراوایی وجود دارد که یک اندازه­گیری دقیق در آزمایشگاه، مستلزم صرف وقت و هزینه است. امروزه با توجه به توسعه روش­های تصویربرداری و پیشرفت کامپیوترها، شاخه جدیدی در فیزیک سنگ بر مبنای مطالعه رقومی سنگ­ها به­وجود آمده است که فیزیک سنگ رقومی نام دارد. در این روش، با تصویربرداری از ساختمان داخلی سنگ‌ها می­توان ویژگی‌هایی چون تخلخل و تراوایی را اندازه‌گیری کرد. در این مقاله از 10 پلاگ سنگی تهیه ­شده از یکی از مخازن کربناته مزوزوییک جنوب غربی ایران تصاویر توموگرافی پرتو ایکس پزشکی با تفکیک­پذیری 200 میکرومتر تهیه شد. با ساخت حجم نماینده یا Representative Volume Element (RVE)، مدل سه­بعدی فضای خالی نمونه­ها از روی تصاویر دوبعدی حاصل شد. در نهایت با کدنویسی تحت MATLAB به­منظور شبکه­بندی RVEهای به دست آمده، جریان سیال در آنها شبیه­سازی شد و مقدار تراوایی برای هر کدام به­ دست آمد. بر اساس نتایج آزمایشگاهی، مقادیر تراوایی محاسبه شده برای این پلاگ­ها نشان­دهنده یک روند با مقادیر گزارش شده توسط آزمایشگاه با میزان همبستگی 90% است. با استفاده از روش پیشنهادی و روند به دست آمده، می­توان تراوایی نمونه­های سنگی همان چاه که هنوز مورد آزمایش قرار نگرفته­اند را با سرعت بیشتر و هزینه کمتر به دست آورد.}, keywords_fa = {تراوایی,فیزیک سنگ رقومی,جریان سیال,توموگرافی پرتو ایکس,هندسه فضای خالی}, url = {http://www.gsjournal.ir/article_84442.html}, eprint = {http://www.gsjournal.ir/article_84442_2086fd89f92b60ed6bc27d9c13a1feac.pdf} }