Geological Environment and Engineering
Amir Mahyar Azhdarpour; Mohammad Reza Nikudel; Mashalah Khamehchiyan
Abstract
The central Alborz structural-sedimentary area in the middle part of the Alborz Mountain Range has endured geological events from the Precambrian to the present era, and contains numerous geological structures and formations. Among these, sandstone formations also have a significant expansion. In this ...
Read More
The central Alborz structural-sedimentary area in the middle part of the Alborz Mountain Range has endured geological events from the Precambrian to the present era, and contains numerous geological structures and formations. Among these, sandstone formations also have a significant expansion. In this research, 6 different sandstone formations were sampled in 2 locations and tested to determine their physical and mechanical characteristics. In general, in the sandstone formations of central Alborz, top quartzite has stronger mechanical parameters than other formations. Shemshak Formation has the lowest mechanical parameters among the selected formations. Based on regression analysis, the conversion factor of PLT, BST and CPI parameters to unconfined resistance or UCS showed 20.6, 6 and 20.40 respectively with R2s of 0.75, 0.90 and 0.78. In terms of the Cerchar Abrasivity Index (CAI) as an index that can show the amount of abrasion, top quartzite has the most abrasiveness, which is due to its lithological composition. This sandstone formation is placed in the category of stones with high abrasive ability, and Shemshak Formation has the lowest Cerchar index among the formations and is placed in the group of stones with extremely low abrasiveness.
Economic Geology
Hadi Mohammadian; vartan simmonds; kamal Siahcheshm
Abstract
The Sarikhanloo area is located within the Qaradagh metallogenic zone in northwest Meshgin Shahr. Igneous rocks cropped out in this area include successions of Paleocene-Eocene pyroclastic rocks (tuff and andesitic-dacitic lavas with intercalations of ignimbrite) and basaltic andesite lava flows. Igneous ...
Read More
The Sarikhanloo area is located within the Qaradagh metallogenic zone in northwest Meshgin Shahr. Igneous rocks cropped out in this area include successions of Paleocene-Eocene pyroclastic rocks (tuff and andesitic-dacitic lavas with intercalations of ignimbrite) and basaltic andesite lava flows. Igneous rocks show high-K calc-alkaline to shoshonitic nature and are mainly metaluminous, formed in a post-collisional uplift tectonic setting. Hydrothermal activities in this area brought about formation of vast silicic veins and caps, along with silicic, propylitic, phyllic (non-pervasive) and intermediate argillic alterations around the veins, as well as intermediate to advanced argillic alteration halos at the margins of silicic caps. Ore minerals in the silicic veins includes pyrite, arsenopyrite and Fe-oxides, accompanied by minor malachite, formed during four mineralization stages. Fluid inclusion studies indicate that the homogenization temperature of fluid inclusions ranges from 175 to 355 °C, considering the low pressure of fluid inclusions (≤ 0-40 bars), can signify the fluid temperature at the time of entrapment. The estimated salinity values are between 0.2 and 3 wt% NaCleq.
Exploration and Mining
Hassan Bakhshandeh Amnieh; Amirhossein Rostami; Kurosh Shahriar; Hamid Chakeri; Masoud Cheraghi Seifabad
Abstract
When a tunnel passes through weak soil with different conditions, or there is a thin layer of soil on top of the tunnel, the mass of soil or rock must be stabilized. In addition, an excavation method must be chosen and applied in order to control the amount of subsidence and convergence which are among ...
Read More
When a tunnel passes through weak soil with different conditions, or there is a thin layer of soil on top of the tunnel, the mass of soil or rock must be stabilized. In addition, an excavation method must be chosen and applied in order to control the amount of subsidence and convergence which are among the most significant factors in excavation a tunnel especially in urban area, since the soil between the tunnel and the ground moves due to changes in the shape of the tunnel through excavation, and progression of these movements toward the ground is manifested in subsidence of the surface structures. Therefore, in order to choose an excavation method based on the conditions of the project site, providing a decision-making model is essential. The ultimate goal is to select the most suitable subway tunnel excavation method among all available alternatives based on some determining criteria for Isfahan subway tunnel (Line 1). These criteria along with Multi-Criteria Decision Making (MCDM) models helped prioritize suitable alternatives. This model was designed based on technical, financial, executive, social, political and geo-mechanical features of the research site each of which subsumes a number of criteria. On the one hand, alternatives include Open Shield (full face) method, Slurry method, NATM method and excavate twin tunnel with TBM method which are used in the model. Finally, alternative D (excavate twin tunnel with TBM method) was selected as the best alternative of the site in both AHP(D=0.225) and TOPSIS(D=0.676391).
Economic Geology
Kolsoum Fani Chenar; Mansour Ghorbani; Reza Kohansal; Jamshid Lotfian
Abstract
Ali abad chromites mines (north east of Forumad) are as a part of chromites assemblage dependent on ophiolite Sabzevar that are located in NW Sabzevar city. Chromitites deposits in these mines have been located as irregular lenses and layered or banded along with pods of dunite in depleted harzburgite. ...
Read More
Ali abad chromites mines (north east of Forumad) are as a part of chromites assemblage dependent on ophiolite Sabzevar that are located in NW Sabzevar city. Chromitites deposits in these mines have been located as irregular lenses and layered or banded along with pods of dunite in depleted harzburgite. In attention to mineralogy observation, incongruent melting of orthopyroxenes and exsolution lamellae of clinopyroene in the orthopyroxenes, indicate that these rocks were originally formed at mantle pressures and temperatures conditions. Mineralography study on the textures and structures of Ali abad chromites indicate two types main textures that are primary and secondary. The primary textures and structures include massive and disseminated or separated grain. The milonitic, brecciated and tensional textures are from secondary types in chromites. On the basis of geochemical results the structural formula are calculated as the chromite minerals [(Mg,Fe2+)O (Cr,Al,Fe3+)2O3].These studies represent height percent Cr2O3 chromite mineral in disseminated texture than massive textures. Geochemical study on the chromitite area, site them in height Cr types and associated to podiform type that are originated from a parent melt with boninitic character resulting from high degree of partial melting of mantle peridotite in Supra Subduction Zone (SSZ).
Geophysics
Ghazal Janghorban; Seyed Mohammad Abtahi Forooshani; Keytash Moshtaghian; Hooshang Asadi Harooni; Hamzeh Sadeghi Sorkhani; Mohammad Hajheidari
Abstract
Kuh-e Lakht epithermal gold index is located on Urumieh-Dokhtar Volcanic Belt in Isfahan province. Geological studies indicate the presence of an epithermal gold mineralization system in the area. The geophysical exploration in the area includes magnetometry, resistivity, and induced polarization ...
Read More
Kuh-e Lakht epithermal gold index is located on Urumieh-Dokhtar Volcanic Belt in Isfahan province. Geological studies indicate the presence of an epithermal gold mineralization system in the area. The geophysical exploration in the area includes magnetometry, resistivity, and induced polarization surveys. Then, we implemented Li and Oldenburg algorithm for 3D inversion of the magnetic data. The depth of the largest estimated magnetic susceptibility obtained from data inversion coincides with the average depth of the magnetic sources obtained from Euler deconvolution. Furthermore, we compared the estimated 2D resistivity and electrical changeability models and the estimated magnetic susceptibility. The comparison denotes the correlation of the estimated magnetic susceptibility variations with the reduction of resistivity, high electrical chargeability, and alteration zones. Combining the estimated magnetic susceptibility model with the geochemical analysis of the exploratory boreholes in the area indicates that the mineralization often occurred at the maximum variation of the magnetic susceptibility. Nonetheless, the results indicate the possibility of mineralization along the zones with large magnetic susceptibility variations.
Petrology
Morteza Khalatbari Jafari; Narmin Banehee; Mohamad Faridi; Mehdi Moradi
Abstract
The Neogene volcanic rocks are exposed in south Arab abad, Lut block. The studied volcanic rocks covered Eocene and Oligocene volcanic lavas and Neogene evaporitic deposits. The base of the Neogene volcanic sequence made of breccia and tuff gradually covered by andesite, trachyandesite and dacitic lavas. ...
Read More
The Neogene volcanic rocks are exposed in south Arab abad, Lut block. The studied volcanic rocks covered Eocene and Oligocene volcanic lavas and Neogene evaporitic deposits. The base of the Neogene volcanic sequence made of breccia and tuff gradually covered by andesite, trachyandesite and dacitic lavas. These lavas have aphyric-phyric textures and microlitic to hyalomicrolitice in matrix. These lavas show calck alkaline magmatic trend. REE patterns and spider diagrams display enrichement in LREE and LILE relative to HREE and depletion in HFSE which like as subduction zone magmatism. In the tectonomagmatic diagrams they plot of subduction and post-collisions fields. Interpretation of the geochemical data indicates that the studied lavas probably produced from partial melting of lithospheric mantle which had previously enriched by subduction components (fluids and melt). Partial melting of crust, probably involved in generation of acidic lavas. It seems that in the Neogene period, lithosphere thinning induced partial melting of heterogeneous Sub Continental Lithospheric Mantle (SCLM). These processes consequently occurred by lithospheric delamination and asthenospheric upwelling.
Economic Geology
masoumeh Norouzi; Ali Abedini; Ali Asghar Calagari; Fatemeh Kangarani Farahani
Abstract
The kaolin occurrence in the Abolhasani-Zereshkouh area (south of Shahroud, northeast of Iran) is a product of alteration of Eocene andesitic rocks. With attention to mineralogical studies, kaolinite, quartz, chlorite, montmorillonite, illite, rutile, calcite, orthoclase, albite, vermiculite, palygorskite, ...
Read More
The kaolin occurrence in the Abolhasani-Zereshkouh area (south of Shahroud, northeast of Iran) is a product of alteration of Eocene andesitic rocks. With attention to mineralogical studies, kaolinite, quartz, chlorite, montmorillonite, illite, rutile, calcite, orthoclase, albite, vermiculite, palygorskite, jarosite, and hematite are the mineral assemblege of this alteration occurrence. Calculations of mass balance of elements with assuming Zr as monitor immobile element show that elements such as Si, Fe, Mg, Na, K, Ti, Cr, Ba, Be, Co, Cs, Rb, Sn, U, V, W, Ni and REE were partially depleted and elements such as Hf, Zn and Cd enriched during the kaolinitization processes of andesitic rocks. Other elements including Al, Ca, P, Mn, Ga, Nb, Sr, Ta, Th, Y, Cu, Pb and Tl were undergone both leaching and fixation processes. The mass decrease of Si, Fe, K, Rb, Cs and Ba reveals destruction of plagioclase and hornblende by highly acidic hydrothermal fluids. The presence of two abnormal decreasing and increasing trends for the elements Al, Ga, P, Nb, Ta, and Y can be attributed to the low pH of the altering fluids, the high water-to-rock ratio and the abundance of complexing legands.
Petrology
Zeinab Rahmanian; Gholam Reza Ghadami; Hamid Ahmadipour; Mohammad Poosti
Abstract
Dalfard granitoids are located in the south-east of Kerman province and in the margins mainly include quartz diorite. Quartz diorites contain main minerals plagioclase, amphibole and biotite and this work reveals that the rocks in this area are I type granitoides and they belong to calc-alkaline ...
Read More
Dalfard granitoids are located in the south-east of Kerman province and in the margins mainly include quartz diorite. Quartz diorites contain main minerals plagioclase, amphibole and biotite and this work reveals that the rocks in this area are I type granitoides and they belong to calc-alkaline magmatic series. The enrichment of LREE relative to HREE, high contents of LILE relative to HFSE and anomalies of Nb and Ti in spider diagrams show that the Dalfard quartzdiorites are formed in an arc setting environment. The CaO/(MgO+FeOt) and Al2O3/(MgO+FeOt) ratios (0.55 and 1.36 respectively) show that the parent magmas were formed by the partial melting of basaltic rocks of the lower crust and mantle fluids/melts also participated in their formation. Based on geochemical data such as La/Yb(N) and Th/Yb(N) ratios (4.4 and 6.5 respectively), these magmas are related to pre-plate collision environment and formed in the mature Volcanic arc setting at a depth of about 40 km at the supra subduction zone of the Neothetys oceanic lithosphere and then, they ascent to the higher levels of the crust and passed fractional crystallization.
Petrology
Behnaz Bakhtiari; Nahid Shabanian-Broujeni; Alireza Davoudian-Dehkordi; Hossein Azizi
Abstract
The Muteh–Golpayegan Metamorphic Complex is located within the center of the Sanandaj-Sirjan Metamorphic Zone. The strain parameter measurements by the strain ellipsoid including strain ratio in the XZ principal plane, strain ellipsoid (RXZ), strain ellipsoid shape (K), and strain intensity (D) ...
Read More
The Muteh–Golpayegan Metamorphic Complex is located within the center of the Sanandaj-Sirjan Metamorphic Zone. The strain parameter measurements by the strain ellipsoid including strain ratio in the XZ principal plane, strain ellipsoid (RXZ), strain ellipsoid shape (K), and strain intensity (D) exhibit prolate shape for the amphibole mineral for the deformed amphibolitic rocks in the Muteh–Golpayegan Metamorphic Complex. Several kinematic shear sense indicators consist of the asymmetric fold, kink fold, boudin, S/C fabrics, oblique grain shape, and mineral fishes show a dextral shear sense. The quantitative kinematic analyses highlight that Wk varies between 0.6 and 0.93, implying a general shear flow with 42% < simple shear <74% and 26% < pure shear <58%.
Economic Geology
Maryam Kiaeshkevarian; Ali Asghar Calagari; Ali Abedini; GholamHossein Shamanian
Abstract
The Gheshlagh bauxitic deposit is located in ~110 km southeast of Gorgan city. Mineralogical studies indicated the presence of minerals such as boehmite, diaspore, kaolinite, hematite, goethite, anatase, rutile, chamosite, calcite, moscovite, clinoclar, provskite, quartz, and dolomite. Based on quantitative ...
Read More
The Gheshlagh bauxitic deposit is located in ~110 km southeast of Gorgan city. Mineralogical studies indicated the presence of minerals such as boehmite, diaspore, kaolinite, hematite, goethite, anatase, rutile, chamosite, calcite, moscovite, clinoclar, provskite, quartz, and dolomite. Based on quantitative mineralogy this deposite made up of (1) bauxitic clay, (2) clayey bauxite, (3) bauxitic clayey iron ore and (4) bauxitic iron ore. Calculations of the enrichment factors, with assumption of upper continental crust (UCC) as parent rocks, showed that elements such as Rb, Cs and Ba were depleted during bauxitization processes whereas elements like Y, Cr, Co, Ni, V and HREEs were encountered enrichment.Elements like Sr, Ga, Zr, Hf, Nb, Ta, U, Th and LREEs underwent both leaching and fixation processes during development of the weathered profile. Combination of the results obtained from mineralogical and geochemical investigations showed that factors such as adsorption, scavenging by metallic oxides and hydroxides, fluctuation of underground water level, type and stability of metal-containing complexes, stability of primary bearing minerals, presence in mineral phases resistant to weathering and changes in chemistry of the solutions responsible for weathering played prominent role in distribution and mobilization of elements in the studied bauxitic ores.
Stratigraphy and Palaeontology
Hossein Gholamalian; Mohammad Kazem Kamali
Abstract
Pteriomorpha, Heterodonta, Paleoheterodonta and Anomalodesmata bivalves from the Kazhdumi Formation of the Geno and Gerash sections in the southeast of Zagros Mountains are studied here. In order to this research, bivalve speies are identified and described as follow: Arctica angulata, Birostrina ...
Read More
Pteriomorpha, Heterodonta, Paleoheterodonta and Anomalodesmata bivalves from the Kazhdumi Formation of the Geno and Gerash sections in the southeast of Zagros Mountains are studied here. In order to this research, bivalve speies are identified and described as follow: Arctica angulata, Birostrina concentrica, Ceratostreon flabellatum, Crassatella manzourensis, Flaventia belviderensis, Granocardium productum, Gyrostrea delettrei, Illymatogyra africana, Mytiloides concentricus, Neithea dutrugei, Neithea sp. 1, Neithea sp. 2, Paraesa faba, Pinna cfcretacea, Pholadomya fabrina, Pholadomya vignesi, Protocardia hillana, Pterotrigonia scabra, Rhynchostreon suborbiculatum, Tenea delettrei, Venericardia deserti. Many of these species excluding Ceratostreon flabellatum, Illymatogyra africana, Neithea dutrugei and Pterotrigonia scabraare reported for the first time from Iran. Kazhdumi Formation disconformably overlies the top of the Dariyan Formation and underlies the Gurpi Formation.
Petrology
Ziba Khodaean Chegeni; Nematollah Rashidnejad Omran; Ali Akbar Baharifar; Reza Nozaem; Carmela Vaccaro; José Francisco Santos
Abstract
Takhte-Soleyman ortho-amphibolites as a part of Takab metamorphic complex are located in Northeast Takab. These rocks consist of amphibolite, Garnet-amphibolite, Kyanite-Garnet-amphibolite, Hornblendite and Epidote-amphibolite. Petrography and whole- rock geochemistry show that basalt, andesite and/or ...
Read More
Takhte-Soleyman ortho-amphibolites as a part of Takab metamorphic complex are located in Northeast Takab. These rocks consist of amphibolite, Garnet-amphibolite, Kyanite-Garnet-amphibolite, Hornblendite and Epidote-amphibolite. Petrography and whole- rock geochemistry show that basalt, andesite and/or their intrusive equivalents with calc- alkaline to tholeiitic affinity and even a peridotite could be their protoliths. Trace element and Sr-Nd ratios imply that these rocks were from mantle melt sources. In chondrite normalized plots, these amphibolites can be classified into at least two groups. The first group is characterized by LREE depletion relative to HREEs and some with flat patterns. The second has an enrichment of LREEs relative to HREEs. These two different patterns and some other geochemical characters suggest MORB or MORB-like and arc affinities of the parental magmas. This can be related to the time progressive evolution of magmatism either from MORB or Back-arcto Arc or from Arc to Back-arc setting.
Petrology
J. Ghalamghash; Sara Houshmand; Sayad Jamal Shaikhzakariaee; Hamideh Rashid
Abstract
The Kharsare intrusive mass (South of Ghorveh) is located in the middle part of the Sanandaj–Sirjan zone. The batholith comprises three plutonic units including gabbro- diorite, granite and syenite. In addition, the hybrid rocks with a lot of mixing and minling evidences (including lobate or/and ...
Read More
The Kharsare intrusive mass (South of Ghorveh) is located in the middle part of the Sanandaj–Sirjan zone. The batholith comprises three plutonic units including gabbro- diorite, granite and syenite. In addition, the hybrid rocks with a lot of mixing and minling evidences (including lobate or/and ellipsoidal micro granular mafic enclaves sometimes with chilled margins in granite or in hybrid rocks; net-veining granite; and synplutonic brecciated mafic dikes) crop out in interaction zone between granites and gabbros. The calc-alkaline and metaluminous gabbro-diorite and High-K calc-alkaline and peraluminous granites emplaced in Late Jurassic, simultaneously. The peraluminous A-type syenite formed later and intrude two above mentioned plutonic rocks. Geochemical features suggest that gabbro-diorites and granites formed in an active continental margins. It seems the pioneer mafic magma formed in a subduction setting by partial melting of metasomatized mantle. It ascent and emplace in lower crust to produce the granitic melt. The mingling and mixing evidences that may support local crustal contamination of the mafic melt. The younger syenite is resulted from heating by intrusion of the mafic magma in the end phase of continental arc magmatism.
Economic Geology
Susan Ebrahimi; Alireza Arabamiri; Hadi Ghanbari
Abstract
The Sharifabad-Bardeskan copper mineralization is located in northeast of Bardeskan and south section of Sabzevar Zone. Mineralization occurs as vein in the pyroxene andesite, tuff, sandstone and conglomerate of Eocene age, which bearing local sericite - carbonate and silicic alterations and regional ...
Read More
The Sharifabad-Bardeskan copper mineralization is located in northeast of Bardeskan and south section of Sabzevar Zone. Mineralization occurs as vein in the pyroxene andesite, tuff, sandstone and conglomerate of Eocene age, which bearing local sericite - carbonate and silicic alterations and regional propylitic alteration. Mineralization occurs as open space filling, disseminated, veinlets and consists of chalcocite pyrite, chalcopyrite, malachite, azurite with calcite and quartz as gangue minerals. Fluid inclusion studies in calcite show the evidence of mixing trend during the ore formation occurred at a wide range of temperature 200to 437 °C and varying salinity between 0.1 to 9.2 wt.% NaCl equivalent. The stable isotope composition of δ34S fall in a range of -23 to -24.3‰ could be considered as biogenetic sulfur from bacterial sulfate reduction. The δ13C values of calcite vary between -3.4 to -24.5‰ suggest a major contribution of marine carbonates associated igneous carbonates. Copper and sulfide rich hydrothermal fluid has flowed upward through the local faults and permeable interbeds within the Eocene volcanic sequence and formed the mineralized veins. Based on the mineralization, alteration, fluid inclusion and stable isotopes, Sharifabad mineralization is similar to those manto type deposits in Chile.
Petrology
Habibollah Ghasemi; Mahbubeh Arabzadeh Baniasadi; mojtaba rostami hosuri
Abstract
The Abbasabad Eocene volcano-sedimentary belt in the east of Shahrood includes of basaltic-andesitic rocks and related pyroclastics along with interlayers of sedimentary rocks. The volcanic rocks include olivine basalt, trachybasalt, trachy andesybasalt, trachyandesite and andesite with various textures ...
Read More
The Abbasabad Eocene volcano-sedimentary belt in the east of Shahrood includes of basaltic-andesitic rocks and related pyroclastics along with interlayers of sedimentary rocks. The volcanic rocks include olivine basalt, trachybasalt, trachy andesybasalt, trachyandesite and andesite with various textures such as hyallomicrolitic porphyry, microlitic porphyry, glomeroporphyry, trachytic and sieve textures. The main minerals of the rocks are clinopyroxene and feldspar. Pyroxene composition ranges from diopside to augite and feldspar composition is in the ranges of orthoclase and oligoclase to bytownite. The 87Sr/86Sr(Initial) and 143Nd/144Nd(Initial) ratios of these rocks, taking into account the age of 40 Ma for them, range from 0.7042 to 0.7047 and 0.5127 to 0.5130 respectively. Also, the values of ԐNd(0) and ԐNd(t=40Ma) of them range between 2.67 to 7.72 and 3.8 to 8.8, respectively, indicate an enriched mantle source for them. Whole rock, isotopic and clinopyroxene chemistry indicate arc-related calc-alkaline-alkaline nature and basaltic composition of the parental magma originated from partial melting of an enriched OIB source in an extensional intra-arc setting. Geothermobarometry calculations on clinopyroxene indicate a temperature range of 1100-1150 Cº and pressures of 2-13 kb for crystallization of the magma.
Petrology
Ayoub Veisinia; Mohammad Ebrahimi; Bahman Rahibzadeh; rasoul Esmaeili
Abstract
Kamyaran ophiolitic complex located in the northeast Zagros orogeny along the crush zone between Arabian-Iranian plates. This complex outcropped between the Harsin ophiolites in southeast and Sarwabad ophiolite in northwest. Field observation reveal the fact that the Garmab Ophiolite in the northeast ...
Read More
Kamyaran ophiolitic complex located in the northeast Zagros orogeny along the crush zone between Arabian-Iranian plates. This complex outcropped between the Harsin ophiolites in southeast and Sarwabad ophiolite in northwest. Field observation reveal the fact that the Garmab Ophiolite in the northeast of Kamyaran is a tectonic mélange including peridotites and gabbros cut by microgabbroic dikes. Olivine, clinopyroxene and orthopyroxene with chromian spinel made the peridotites minerals with mesh and porphyroclastic fabrics and Gabbros include plagioclase, clinopyroxene and minor amphibole with intergranular, pegmatoidic and interstitial texture. According to the geochemical results, gabbros have tholeiitic to calk-alkaline nature and show the MORB to island arc characteristics. According to the geochemical and geotectonic results, Garmab peridotites plotted to the abyssal peridotites area that represent from the residual mantle spinel lherzolite after extraction of 15–20% partial melting. The break-off of Neo-Tethyan slab and subduction of this slab branch beneath the oceanic lithosphere during cretaceous led to cessation of the Neo-Tethyan subduction beneath the Sanandaj-Sirjan block, and forming arc-back arc basin (second step of subduction) and related rocks in the Kamyaran ophiolite. Presence of tholeiitic to calc-alkaline magmatism is in response to the slab retreat in the Eurasian continental margin.
Petrology
Hamid Karimzadeh; Mohammad Rahgoshay; Iman Monsef
Abstract
The petrographical examination of peridotites of the Nehbandan ophiolitic complex revealed that the peridotites of Kalateh Shahpouri, Qadamgah, Lah-Kouh, Cheshmeh anjir, Bandan, and Zolfaghari were of harzburgite type and Sefid-Kouh and Nasfandeh-Kouh were of lherzolite type. Generally, the types of ...
Read More
The petrographical examination of peridotites of the Nehbandan ophiolitic complex revealed that the peridotites of Kalateh Shahpouri, Qadamgah, Lah-Kouh, Cheshmeh anjir, Bandan, and Zolfaghari were of harzburgite type and Sefid-Kouh and Nasfandeh-Kouh were of lherzolite type. Generally, the types of clinopyroxenes in the peridotites of this complex were diopside. The geochemical investigation of clinopyroxenes in Mg# vs. Al2O3, Cr2O3, and TiO2 graphs and Ti vs. Nd, Zr, and Sr graphs shows that the peridotites of Nasfandeh-Kouh, Bandan, Zolfaghari, and Sefid-Kouh with a low degree of partial melting belong to the Abyssal tectonic setting and back-arc basin.on the other side, the harzburgites of Kalateh Shahpouri and Cheshmeh anjir were formed in the Supra-subduction zone tectonic setting and fore-arc basin and have a high degree of partial melting. The study of incompatible elements, LILE and HFSE in spider diagrams normalized to the primary mantle and as well as the study of REEs in spider diagrams normalized to the chondrite for clinopyroxenes confirm this issue. Therefore, Nasfandeh-Kouh and Sefid-Kouh lherzolites as well as Qadamgah, Lah-Kouh, Bandan, and Zolfaghari harzburgites with a low degree of depletion were more consistent with the Mid-oceanic ridgestectonic setting, and the harzburgites of Kalateh Shahpouri and Cheshmeh anjir were close to the Supra-subduction zone tectonic setting with a high degree of depletion.
Tectonics
babak Samani; Sajad Zareie; Atefeh Ghanbari
Abstract
Split-window algorithm is the effective method for determination of land surface temperature. The results of temperature pattern show that the Gach salt dome has a higher temperature than the Siah Tagh salt dome. From a structural point of veiw, the higher temperature of the Gach salt dome can be related ...
Read More
Split-window algorithm is the effective method for determination of land surface temperature. The results of temperature pattern show that the Gach salt dome has a higher temperature than the Siah Tagh salt dome. From a structural point of veiw, the higher temperature of the Gach salt dome can be related to the rooting of this dome and its relationship with the basement salt column. While the lower temperature of the Siah Tagh salt dome can be due to the lack of connection between the salt dome and the salt source of Hormuz Series. Temperature anomaly maps show the different temperature pattern in these two salt domes. Spatial pattern of temperature anomaly in the Siah Tagh dome show the linear trend in the eastern part of the dome. This temperature linear pattern in the Siah Tagh dome probably is related to the morning sunshine in the eastern slope of this dome. According to the resulting LST map, the highest temperature in the Gach salt dome is 41.87 °C and 36.7 °C in the Siah Tagh salt dome.
Economic Geology
Alireza Zarasvandi; Mohsen Rezaei; Mansour Adelpour; Hadis Parvaneh
Abstract
Parkam (Sara) and Abdar porphyry Cu deposits containing mainly dioritic and quartz dioritic stocks are located in the southern part of Urumieh-Dokhtar Magmatic Belt (UDMB). In the Parkam deposit, alterations such as potassic, potassic-phyllic, biotitic, phyllic, argillic and propylitic have been identified, ...
Read More
Parkam (Sara) and Abdar porphyry Cu deposits containing mainly dioritic and quartz dioritic stocks are located in the southern part of Urumieh-Dokhtar Magmatic Belt (UDMB). In the Parkam deposit, alterations such as potassic, potassic-phyllic, biotitic, phyllic, argillic and propylitic have been identified, while Abdar deposit is characterized by the limited extent of potassic alteration with widespread occurrence of phyllic alteration. The aim of this study is to characterize the phyllic alteration using sericite and sulfide (i.e., pyrite and chalcopyrite) chemistry. In this way representative phyllic alteration samples were analyzed using Electron Microprobe Analysis (EMPA). Results imply for higher concentrations of Zn, Ag, Au, and as in the chalcopyrite samples (averages in wt. %; 0.07, 0.007, 0.012, and 0.043; respectively). Comparably, pyrite samples exhibit higher concentrations of Re, Te, Co, and Mo (averages in wt. %; 0.01, 0.003, 0.09, 0.07; respectively. Among this, gold concentration in the pyrite samples of studied deposits is analogous to those reported previously for Meiduk porphyry Cu-Mo systems wherein gold occurs as inclusions, and/or nanoparticles (probably as Au0 or Au-telluride). In the both deposits, fine-grained micas are K-rich. Additionally, sericite samples exhibit an increasing trend of Si with Fe2+, Mg2+, and Al3+ substitution in the octahedral sites confirming the changes to celedontie - endmember. In accordance with other mineralized porphyry systems (i.e., Copper Cliff and Copper Flat deposits), most of the data follow the trend of ideal tschermak substitution occurring by the increasing of positive charges in the tetrahedral site of white mica owing to the increasing of Si substitution.
Petrology
Niloofar Nayebi; Dariush Esmaeily; Soroush Modabberi; Ryuichi Shinjo
Abstract
Anomaly 21A, as a part of Bafq iron-apatite ore metallogenic district, is located in Central Iran, and encompasses wide spectrume of igneous, sedimentary and metamorphic rocks. The igneous rocks that show narrow geochemical variations and dominantly plot in the monzonite to monzodiorite fields, are ...
Read More
Anomaly 21A, as a part of Bafq iron-apatite ore metallogenic district, is located in Central Iran, and encompasses wide spectrume of igneous, sedimentary and metamorphic rocks. The igneous rocks that show narrow geochemical variations and dominantly plot in the monzonite to monzodiorite fields, are plotted in the calc-alkaline and high-K calc-alkaline affinities. Geochemical data are characterized by enrichment LILE and LREE as compare to HFSE and HREE, respectively, and depletions in Nb-Ta-Ti imply the mantle-derived melts modified by subduction components. The isotopic signatures of Anomaly 21A samples, e.g., (87Sr/86Sr)i, εNd(t)=, imply the dominant mantle signature. Their initial Pb isotopic composition of study rocks are 18.87 to 20.32 for (206Pb/204Pb), 15.72 to 15.84 for (207Pb/204Pb), and 40.74 to 42.32 for (208Pb/204Pb). The isotopic modellings show less than 4% incorporation of melt-derived subducted sediment into the mantle wedge or variable degrees of contamination by upper continental crust. We suggest partial melting of a sub-arc mantle melt that has been metasomatized by slab-derived sediments and interacted with continental crust en-route the shallower surface as the premise of the geodynamic of Central Iran.
Sedimentology
Zeinab Aalishavandi; Hossain Rahimpour-Bonab; Ali Kadkhodaei; Mehran Arian
Abstract
The Sarvak Formation deposited in the North to Northeastern margin of the Arabian Platform during the Mid-Cretaceous, and is extensively encountered in the Folded Zagros of southwestern Iran. It is the most important reservoir unit after the Asmari Formation in Iran. Petrographic analysis of the drilled ...
Read More
The Sarvak Formation deposited in the North to Northeastern margin of the Arabian Platform during the Mid-Cretaceous, and is extensively encountered in the Folded Zagros of southwestern Iran. It is the most important reservoir unit after the Asmari Formation in Iran. Petrographic analysis of the drilled wells of the Kupal oil field led to recognition of in studied wells led to determination of eight microfacies that deposited in 3 sub-environments; restricted lagoon, lagoon-open marine and shoal in an interior part of Continental carbonate ramp. Petrographic studies revealed that since deposition, the Sarvak Formation experienced several diagenetic realms including marine, meteoric, burial and telogenetic diagenetic environments. Location of the studied wells shows that the relative depth of the Sarvak Formation ramp increases from the east to the west. These diagenetic successions are mainly restricted to the upper and lower parts of the Cenomanian-Turonian disconformity. Meteoric water infiltration below this Cenomanian-Turonian disconfirm boundary and related Dissolution led to development of moldic and vuggy porosity And as a result, the reservoir potential has been increase. In this study Hydraulic flow units were identified firstly using flow zone indicators and secondly using a stratigraphic modified Lorenz plot. The flow units resulting from these two methods are compared, and their close correspondence within the sequence stratigraphic framework is discussed. Base on this results six hydraulic flow units are defined as flow units 1 and 2 of the best reservoir quality and the reservoir potential reduced to the flow unit 6.
Geological Environment and Engineering
Shahrzad Faryadi; Ali Alavi Naeini
Abstract
climate change is known as one of the most important environmental crises which has made many problems . Considering the undeniable impact of humans in the production of greenhouse gasses, in this paper the situation of the climate change of Tehran is predicted by modeling three different scenarios, ...
Read More
climate change is known as one of the most important environmental crises which has made many problems . Considering the undeniable impact of humans in the production of greenhouse gasses, in this paper the situation of the climate change of Tehran is predicted by modeling three different scenarios, for the period of 2046 until 2065. Based on optimistic, pessimistic and neither pessimistic nor optimistic scenarios, the alterations of climate parameters are forecasted. It is concluded that the amount rainfall will decrease, while, the amount of temperature will go up. To do this research the software of LARS-WG is used for modeling the climate change. This software is a sample of Meteorological generating models which is useful for simulation of climate data for now or future in an area. Then, considering the significant role of fossil fuels in deteriorating this phenomenon and determining the proportion of the effects of different modes of transportation in generating carbon, the existing policies on reduction of burning fossil fuels is investigated. At the end, based on the necessity of cooperation of people in various aspects of formulation of policies including behavioral-social and technological-technical, some suggestions are proposed to decrease the production of carbon.
Sedimentology
keyvan ahzan; Nader Kohansal Ghadimvand; Seyed Mohsen Aleali; Davood Jahani
Abstract
The Jahrum Formation (Paleocene-Mid Eocene) is one of the most important reservoir units in the Zagros basin and the Persian Gulf. The thickness of this formation in Binaloud oil field in Persian Gulf, which mainly consists of limestones and Dolomites, is about 660 meters. In this research, depositional ...
Read More
The Jahrum Formation (Paleocene-Mid Eocene) is one of the most important reservoir units in the Zagros basin and the Persian Gulf. The thickness of this formation in Binaloud oil field in Persian Gulf, which mainly consists of limestones and Dolomites, is about 660 meters. In this research, depositional environment, sequence stratigraphy and effective diagenesis processes on Reservoir quality of the Jahrum Formation were investigated in Binaloud oil field. The Jahrum succession, which consists of crystalline limestones and dolomites, is overlain by the Asmari Formation and is underlian by the Tarbur Formation unconformably. According to study of cutting samples, eleven microfacies that were deposited in four facies belts, have determined . The most important diagenetic process that was observed in this formation as follows: bioturbation, cementation, dolomitization, dissolution, porosity generation and fracture systems wich is worthy to mation bioturbation and anhydrite cement causes the reduce of reservoir quality and dolomitization , dissolution and secondary porosity causes the reservoir quality. improvement most of facies jahrum formation are mud supported and have very low primary porosity. According to sequence stratigraphy studies, a third order sedimentary sequence with type SB1 boundary was identified in Jahrum subsurface succession.
Economic Geology
Seyevahid Shahrokhi
Abstract
The chemical composition of chlorite group minerals show that physicochemical condition of crystallization and their formation. The chemical analysis of chlorite from biotite alteration has done based on 30 points of 8 rock samples by electron microprobe. The composition of chlorite samples is located ...
Read More
The chemical composition of chlorite group minerals show that physicochemical condition of crystallization and their formation. The chemical analysis of chlorite from biotite alteration has done based on 30 points of 8 rock samples by electron microprobe. The composition of chlorite samples is located in repidolite- pychnochlorite domain. The mole fraction in the interlayer phase, range from 0.97 to 0.99, indicating a complete lack of smectite layers and purity of chlorite. Calculation of the structural formula of chlorites in Malvak area show that the number of silicon atoms are in the range of 2.64 to 2.91 (apfu) and the sum of the octahedral cations are 6 (apfu). Chlorites of the Malvak area are trioctahedral type. The low titanium content of chlorites, the presence of titanium minerals coexite with chlorite cleavage, and the presence of early biotite crystals are evidence of biotite to chlorite alteration. The mean temperature of chlorites in the Malvak area is 340 ºC, which corresponds to the temperature obtained with the geothermometry of biotite-altered to chlorites. Mesothermal type fluids from the granitoid mass in the study area have been effective in chlorite occurrence. Also, regional metamorphism has played an important role in the chlorite formation.
Sedimentology
hajar ghafleh maramazi; Fardin mousivand; alireza zarasvandi
Abstract
The Gol-e-Zard zinc-lead deposit is located in the Malayer-Isfahan belt of Sanandaj-Sirjan zone in northeast of Aligudarz, Lorestan province. Mineralization occurred as two different ore horizon within metamorphosed Jurassic shale and sandstone. Generally, two ore facieses were distinguished in the deposit: ...
Read More
The Gol-e-Zard zinc-lead deposit is located in the Malayer-Isfahan belt of Sanandaj-Sirjan zone in northeast of Aligudarz, Lorestan province. Mineralization occurred as two different ore horizon within metamorphosed Jurassic shale and sandstone. Generally, two ore facieses were distinguished in the deposit: 1) vein-veinlet/stringer facies, and 2) bedded facies. Primary minerals of the ores involve pyrite, sphalerite, galena and chalcopyrite, and the secondary minerals include cerussite, smithsonite, azurite, malachite and goethite. The gangue minerals are quarts, chlorite, calcite and clay-mineral. In the stringer facies, chalcopyrite replaced mainly pyrite and other minerals indicating influx of a copper-rich hot fluid influx into a pyrite-rich ore called as “zone-refining process”. In the Gol-e-Zard deposit metal and mineralogical zonation was observed. Alteration zones have distinct pattern, silicic-carbonatic at core to chloritic at margins. Based on textures and structures, mineralogical, ore facies, alterations and geochemical characters, the zinc-lead mineralization in the Gol-e-Zard region is of Selwyn-type sedimentary-exhalative (SEDEX) deposits, deformed and metamorphosed by the Late Cimmerian and Laramid Orogenies at green schist facies.
