Document Type : Original Research Paper

Authors

1 Dept. of Mineral Processing, Tarbiat Modarres University, Tehran, Iran.

2 Geological Survey of Iran, Tehran, Iran.

Abstract

An investigation on beneficiation of Lakhshak antimony ore was carried out using flotation methods. The grade of antimony in representative sample was 17.23%. The most important minerals were stibnite, quartz and pyrite and the degree of liberation of stibnite was found to be 700 micrometer. The raw material was divided into three size fractions and beneficiation of fine size fraction (-210+38 m) was floated. The grade of mentioned fraction was 20.50 %. Taguchi method was used in flotation tests and optimum conditions were determined as follows: CuSO4 (1700g/t) as an activator, potassium etyle xanthate (900 g/t) as a collector, MIBC as a frother, pulp density 22% and grain size -150+38 m. All the experiments were carried out at pH = 6.8. As a result the grade and recovery of antimony was obtained 38% (Sb) and 91% respectively.

Keywords

References
Elvers, B., Hawkins, S., 1989- Ulmans Encyclopedia of industrial chemistry.
G.Kelly, E., 1982- Introduction to mineral processing, university of Auckland.
Kirck-Othmer, 1980- Encyclopedia of chemical technology.
Ubaldini, S., Veglio, F., 2000- Process flowsheet for gold and antimony recovery from stibnite,Hydrometallurgy,vol 57,pp 187-199.
Wills, B. A., 1997- Mineralprocessing technology, 6nd edition, British Library Cataloguing in Publication Data,  86 P.